Terrafirma Suspension Parts

Drive Flange for the front hub assembly. The drive flange bolts to the outer face of the hub and engages the splined end of the axle half shaft, t...

Centre Cubby Box finished in black vinyl, fitting the centre position between the front seats to provide an enclosed storage compartment with a mou...

Rear Shock Absorber, standard-travel, for the rear axle suspension. The damper controls vertical movement of the rear axle and damps spring oscill...

Transmission metal sump kit for the ZF 6HP26 six-speed automatic transmission within the Transmission External Components system group. The kit r...

Bonnet Intake Grille Set, finished in satin black with stainless steel mesh, supplied as a matched pair. The grilles fit over the bonnet air intak...

Centre Silencer Replacement Pipe for the exhaust system, fitting in place of the intermediate (centre) silencer box. The pipe provides a straight-...

Lamp Guard - Round - 73mm - a protective guard that fits over a round 73 mm lamp to shield the lens. It clamps over the light unit to protect the ...

Drive Flange for the front hub assembly. The drive flange bolts to the outer face of the hub and engages the splined end of the axle half shaft, t...

Wheel spacer kit fitted between the wheel hub and road wheel within the wheel mounting assembly. The spacers move the wheel mounting face outward...

Wheel Spacer Set, 30 mm: silver alloy wheel spacers for a 5x165 hub, supplied as a set of four with a complete set of wheel nuts. Machined from bi...

Wheel Spacer Set mounts between the wheel hub and the road wheel to increase track width, fitting over the hub and carrying a fresh set of studs fo...

Light Guard Set - Rear Hinged rear lamp guard set that protects the rear lamp lenses from stone strike and low-speed impact during off-road use. T...

Rear Shock Absorber provides damping control on the rear axle for suspension set up with approximately 50 mm of additional travel. Twin-tube const...

Rear suspension shock absorber designed to control vertical movement of the axle and dampen spring oscillation within the suspension system. This...

Lamp Guard for 95mm NAS round lights fitted to Defender models up to 2016. Designed to protect the larger-diameter 95mm North American Specificati...

Extended Bump Stops are compression-travel limiters that sit between the axle and the chassis to cap suspension up-travel and cushion the axle agai...

Steering Damper Assembly for the front axle steering linkage. The hydraulic damper mounts across the steering linkage, where it controls lateral o...

Tow Ball 50mm flange-fixing tow ball for use with a bolt-on tow bar drop plate. Rated for a maximum gross trailer weight of 3.5 tonnes, with a D-v...

Intercooler Hose Kit - Silicone Blue for the turbocharger and intercooler charge-air circuit on the Td5 2.5L 5-cylinder turbo diesel engine. The k...

This new Terrafirma winch has a powerful 6hp, 12v motor combined with a 3-stage planetary gearbox that gives over 5 tonnes of pulling power. It has...

Steering Guard - 8mm Alloy - LHD - Black for underbody protection of the steering linkage assembly. Constructed from 8mm laser-cut alloy plate wit...

Front Coil Spring - Medium Duty, +2" Lift (Terrafirma). These front coil springs raise ride height by approximately 2 inches over standard and are...

Intercooler Hose Kit - Silicone Black for the turbocharger and intercooler air circuit on the TD5 2.5L 5-cylinder turbo diesel engine in the Defend...

Skeleton Front Shock Absorber Turrets are the upper mounting towers for the front shock absorbers, bolting to the front chassis rails. The open tu...

Exhaust Downpipe - De-Cat for the front section of the exhaust system, fitted downstream of the turbocharger outlet on TD5 diesel applications. Th...

LED Beanie Hat with a built-in 80-lumen LED lamp in the front panel, giving hands-free light in the direction the wearer is facing. The lamp runs ...

Steel Road Wheel is a welded steel road wheel with a 6.5 x 16 inch rim, finished in black with a Wolf-style profile for road use with tubeless tyre...

Front Wheel Arch Kit - extended +30mm width - for Defender 90 and 110, supplied as a pair. Moulded from plastic to closely match the profile of th...

Rear Wheel Arch Kit, +30mm wide, supplied as a pair for the rear of the body. The arches extend coverage 30mm beyond the standard profile to suit ...

Silicone Intercooler Hose Kit - a set of silicone charge-air hoses for the TD5 turbo and intercooler circuit, replacing the standard rubber hoses t...

Shock Dropper - Rear - Pair: zinc-plated steel relocated rear shock absorber top mounts that lower the upper mounting point by 50mm. By relocating...

Front Coil Spring - Heavy Load, Standard Height (Terrafirma). These front coil springs are rated for heavy load while retaining the standard ride ...

Brake Pad Set - Rear - a set of friction pads for the rear disc brakes, forming part of the rear braking assembly. The pads locate in the rear bra...

Dislocation Cone - Rear Coil Spring for the rear coil spring seat assembly. When long-travel shock absorbers or lowered top-mount shock relocators...

Rear Coil Spring for the rear suspension, fitting between the axle and the chassis spring seat to support the vehicle and absorb road inputs. This...

Snow Cowl - a moulded ABS cover that fits over the wing-top fresh-air (heater) intake vent. Based on the original military-pattern design, it shie...

Spring Retaining Plate - Rear for the rear coil spring seating assembly on Defender 110 and 130. Coil springs can become dislodged from their axle...

Soft Shackle: a synthetic rope shackle for towing and winching, lighter and easier to handle than a metal shackle. Made from 10 mm synthetic rope,...

Coil Spring - Front - +2" Light Duty is a front suspension coil spring providing approximately 50mm (2 inches) of lift above the standard ride heig...

Silicone Intercooler & Turbo Hose Kit - a set of silicone charge-air hoses for the 300Tdi turbo and intercooler circuit, replacing the standard...

Enhance the steering strength and responsiveness of your Land Rover Discovery 1 and Range Rover Classic with these heavy-duty steering arms. He...

Side Steps - a matched left- and right-hand pair of fixed tubular side runners that bolt to the sill and chassis mounting points, forming a continu...

Wind Deflector Kit - a set of four smoke-tinted wind deflectors that mount along the front and rear door window frames. Each deflector is supplied...

Inner Tube Rubber inner tube sized for 7.50-16 tyres, fitting inside the tyre casing on a 16-inch wheel to hold and retain the air charge. It carr...

Rear Wheelarch Eyebrow Moulding - Unpainted for the Defender body exterior. This moulding fits over the rear wheelarch aperture, covering the body...

Steering Damper - Heavy Duty Type for the steering linkage assembly on Discovery 1 and Range Rover Classic. This hydraulic damper is mounted betwe...

Rear Coil Spring Spacers, +2" - a pair of suspension spacers for the rear coil springs that raise ride height by approximately 2 inches (50 mm). E...

Air-to-Coil Conversion Kit - +2" lift, medium load, with Pro Sport long-travel shock absorbers. Replaces the factory rear air suspension with a co...