Skip to content
8–23 August: reduced summer staffing. Orders may take up to 5 extra working days to dispatch and emails up to 2 working days to answer. Thanks for your patience.
8–23 Aug: orders may ship up to 5 days later.
LR004382G - Crank pulley bolt Puma by Eurospare OEEngine Part Land Rover Range Rover Defender

LR004382G - Crankshaft Pulley Bolt – M12 x 80mm

- €15,50
€15,50
€15,50 - €15,50
€15,50
OEM Part
OEM: Made by an Original Equipment Manufacturer. This part is made by an original equipment manufacturer or under their license, ensuring compatibility and quality.
Brand Eurospare OE
Crankshaft Pulley Bolt - M12 x 80mm fastener that secures the crankshaft pulley (torsional vibration damper) to the front nose of the crankshaft on the 2.4L Duratorq TDCi engine.

It clamps the pulley against the crankshaft, transmitting drive from the crankshaft to the auxiliary drive belt.
Vehicle Model Land Rover Defender up to 2016
Fitment Notes DEFENDER 2007-2016 (PUMA) — 2.4L Duratorq-TDCi HPCR (140PS), (V)7A000001 to (V)BA999999, with or without air conditioning
Crankshaft pulley bolt — M12 x 80mm (L317)
Also previously listed for 2.2L Puma TDCi — not confirmed on JLR EPC / AllMakes
Alternative Codes
LR004382LR004382G

In stock 12 units
12 · Gouda 0 · Drachten
Express delivery available

When will my order arrive?
  • Order before 15:00 (Mon–Fri): same-day dispatch for in-stock items.
  • UPS Express (order before 14:00): dispatched today, delivered tomorrow where available.
  • Netherlands / Belgium / Germany: 2–4 working days.
  • Other EU countries + UK: 4–8 working days.
  • Outside EU/UK: delivery times vary — contact us for an estimate.

Items may ship from multiple warehouses at no extra cost.

Job kits containing this part

This part is included in 0 job kit(s) below. Pick the kit that matches your vehicle and job, then add what you need.

Frequently asked questions

What is the LR004382 crankshaft pulley bolt used for?
The LR004382 crankshaft pulley bolt secures the crankshaft pulley and torsional vibration damper to the front nose of the crankshaft on the 2.4L Duratorq TDCi (Puma) engine. It clamps the pulley in place and transmits drive to the auxiliary belt.
How many crankshaft pulley bolts are needed for the job?
Typically one crankshaft pulley bolt secures the pulley to the crankshaft. It is an M12 x 80mm fastener, so order the single bolt that matches the 2.4L Duratorq TDCi application.
Should the crankshaft pulley bolt be reused or replaced?
Crankshaft pulley bolts on these engines are typically torque-to-yield fasteners and are usually replaced whenever the pulley is removed. A stretched bolt can lose clamp load, so fitting a new one is the safe choice.
Which vehicle does the LR004382 bolt fit?
The LR004382 bolt fits the Land Rover Defender 2007-2016 (Puma) with the 2.4L Duratorq TDCi HPCR 140PS engine, VIN 7A000001 to BA999999, with or without air conditioning. Confirm your engine before ordering.

Frequently Bought With

Products most often purchased alongside this one.

16 items
SKT6003 - Service Filter Kit – 300TDi
Aftermarket

SKT6003 - Service Filter Kit – 300TDi

€30,40 excl. VAT
1013938 - Oil Drain Plug – Engine Sump
Aftermarket

1013938 - Oil Drain Plug – Engine Sump

€7,10 excl. VAT
320604 - Tailgate – Lower
Aftermarket

320604 - Tailgate – Lower

€390,00 excl. VAT
606187 - Mirror Head – Round
Aftermarket

606187 - Mirror Head – Round

€9,90 excl. VAT
90577299 - Heater Control Valve – Cable Controlled
OEM

90577299 - Heater Control Valve – Cable Controlled

€158,60 excl. VAT
ERC2886W - Carburettor Weber 2.25 petrol - S3
OEM

ERC2886W - Carburettor Weber 2.25 petrol - S3

€340,00 excl. VAT
LR004389 - Water pump gasket Puma 2.4
OEM

LR004389 - Water pump gasket Puma 2.4

€9,20 excl. VAT
LR004477 - EGR Gasket
OEM

LR004477 - EGR Gasket

€8,90 excl. VAT
LR058086 - PAS pipe pump to box
Aftermarket

LR058086 - PAS pipe pump to box

€121,40 excl. VAT
PHE500060 - Air filter element Puma TD4 Def.
Aftermarket

PHE500060 - Air filter element Puma TD4 Def.

€7,60 excl. VAT
575166LUCAS - Brake Light Switch – Pedal Box
OEM

575166LUCAS - Brake Light Switch – Pedal Box

€15,90 excl. VAT
No image
Aftermarket

LR004347 - Spacer

€4,50 excl. VAT
LR004501LR - Flanged Copper Nut – M10 – Exhaust Manifold
Genuine

LR004501LR - Flanged Copper Nut – M10 – Exhaust Manifold

€4,70 excl. VAT
LR034032 - Exhaust Manifold Stud – M10
Genuine

LR034032 - Exhaust Manifold Stud – M10

€7,20 excl. VAT
575166 - Brake Light Switch – Pedal Box
Aftermarket

575166 - Brake Light Switch – Pedal Box

€10,90 excl. VAT
JQD500080G - Heater Valve – With Bracket
OEM

JQD500080G - Heater Valve – With Bracket

€170,80 excl. VAT