Land Rover Parts

Alleen geschikt voor OEM High-Lift jack (ARB) NIET voor Jackall/T-max. Voor Jackall / T-Max gebruik: BA 185A (DA4059)

Jack Adapter that provides a secure jacking point for a recovery jack. Bolts into the existing holes under the front bumper and rear crossmember t...

Rear Wing Protector in aluminium chequer plate, guarding the rear wing top and corner - one of the most exposed panels on the body. Fits over the ...

Locking Wheel Nut Set for alloy wheels, comprising four locking nuts that replace standard wheel nuts to deter wheel theft. Thread size 16 x 1.50;...

Heater Hose - Inlet for the engine coolant and cabin heater circuit on the Td5 2.5L 5-cylinder turbo diesel. Carries hot coolant from the engine f...

Retaining Clip for the windscreen A-post finisher on the Discovery 2. This clip secures the interior A-post trim finisher strip to the body at the...

Rear Bumper End Cap - LH is the left-hand rear bumper corner cap, the moulded end section that finishes the outer corner of the rear bumper where i...

Rear Bumper End Cap - RH is the right-hand rear bumper corner cap, the moulded end section that finishes the outer corner of the rear bumper where ...

Radius Arm Bush - Rear for the rear radius arm. The bush is pressed into the radius arm eye and forms the compliant joint between the radius arm a...

Wheel Nut for steel road wheels on the Freelander 1. Standard fastener securing the steel road wheel to the hub. Sold individually.

Wheel Hub Bearing for the front and rear wheel hub assemblies. The bearing locates the hub on the stub axle and steering knuckle, carrying the veh...

Brake Pipe Assembly for the left-hand side of the hydraulic brake circuit. This rigid, pre-formed pipe carries pressurised brake fluid between the ...

Brake Pipe Bracket secures and locates a rigid brake pipe within the braking system's pipe routing. Mounted to the chassis, it clamps the brake li...

Wheel Centre Trim Cover for steel road wheels. This black plastic cap fits into the centre of each steel road wheel, covering the wheel fixings an...

NAS Indicator Light - LED Clear 95mm - a single 95mm LED indicator lamp with a clear lens, designed to NAS (North American Specification) lamp dime...

Wiper Arm forms part of the front windscreen wiper system, carrying the wiper blade and transmitting motion from the wiper motor and linkage to swe...

Fuel Tank Sensor is the fuel level sender unit for the Defender 110 and 130 petrol variants (excluding 6-cylinder engines). The sender is mounted ...

Rear Lamp - RH is the complete right-hand rear lamp assembly for the Discovery 1, incorporating the stop, tail, and reverse functions in a single r...

Body Seal - Rear Lower - LH Lower rear body seal for the left-hand side. It seals the joint between the lower rear body panel and the adjacent bod...

Body Seal - Rear Lower - RH Lower rear body seal for the right-hand side. It seals the joint between the lower rear body panel and the adjacent bo...

Striker Plate - Rear Side Door Check Strap located within the rear side door check strap assembly on the Defender. The striker plate provides the ...

Door Release Cable - Front - LH Internal release cable in the front door latch mechanism. It connects the interior door release lever to the door ...

Release Cable

Body Seal seals the joint between the rear upper body panel and the lower body section.

Window Regulator - Right-Hand for the Defender 90/110 door glass assembly. This regulator operates the right-hand side door window, converting the...

Hinge Bonnet - 90/110

Bonnet Prop Washer for the Defender bonnet support rod assembly. This washer is fitted to the bonnet prop rod and acts as a bearing/retention surf...

Handbrake Expander Assembly for the drum-type transmission (parking) brake mounted at the rear output of the transfer box. The expander sits betwe...

Carburettor Overhaul Kit for the 2.25L four-cylinder petrol engine. The kit renews the perishable sealing and metering components of the carburetto...

12-Point Bolt for the rear axle assembly on models fitted with the Salisbury axle. Secures a bracket to the axle case. The 12-point head allows a ...

Brake Master Cylinder Repair Kit

Cam Follower (tappet) in the valvetrain, riding on the camshaft lobe to transmit its motion to the pushrod and valve. It converts the rotating cam...

Engine Oil 5W-30 is a low-viscosity multigrade lubricant for the engine lubrication system, supplied in a 5 litre container. The 5W-30 grade provi...

Flywheel assy

Radiator Overflow Bottle fitted to the cooling system on Series II, Series III, and 101 Forward Control Land Rovers. This plastic reservoir collec...

Intermediate Exhaust Pipe for the 2.6L 6-cylinder petrol engine. This is the centre section of the exhaust system, connecting the front pipe to th...

Leaf Spring - a seven-leaf semi-elliptic spring for the rear suspension, passenger side. Mounted between the chassis and the rear axle, it support...

Leaf Spring for the rear suspension, right-hand side, within the rear axle and chassis suspension assembly. This multi-leaf spring pack is a seven...

Bulb - 12V 10W is a festoon-type interior lamp bulb measuring 41 x 10.5mm, used in the interior lighting of Range Rover Classic models. Rated at 1...

Washer - a plain flat washer with a 10.5mm internal diameter, sized for M10 fasteners. It seats under a bolt head or nut to spread the clamping lo...

Sump - 2.25 Petrol/Diesel - 2.5 Petrol is the engine oil sump (oil pan) for the 2.25L 4-cylinder petrol, 2.25L 4-cylinder diesel, and 2.5L 4-cylind...

Layshaft Distance Piece - 0.445in is a precision spacer fitted to the layshaft in the manual gearbox of Series IIA and Series III Land Rovers. The...

Circlip for the throttle linkage on the carburettor V8 engine. It retains a pin or clevis within the throttle linkage, holding the linkage componen...

Slip Ring for the horn contact in the steering column. This contact ring maintains the electrical connection to the horn as the steering wheel tur...

Bush - Accelerator Linkage is a small bearing bush fitted to the accelerator linkage assembly on the 2.6L 6-cylinder petrol engine used in Series I...

Tappet Adjuster is the adjustment screw used to set valve clearance in the cylinder head of Land Rover Series 4-cylinder engines. The screw thread...

Handbrake Catch Pawl, the ratchet claw of the transmission parking brake mechanism. It engages the toothed quadrant on the handbrake lever, lockin...