Products

Oil Seal for the swivel pin housing on the front axle, sealing against the polished surface of the swivel ball. The seal seats in the rear face of...

Carburettor Float for the SU carburettor float chamber, within the fuel metering circuit of the 3.5L V8 twin-carburettor petrol engine. The float ...

Spark Plug - ignites the air/fuel mixture in the combustion chamber of the petrol engine. It threads into the cylinder head with its electrode gap ...

Spark Plug - ignites the air/fuel mixture in the combustion chamber of the petrol engine. It threads into the cylinder head with its electrode gap ...

Spark Plug - ignites the air/fuel mixture in the combustion chamber of the petrol engine. It threads into the cylinder head with its electrode gap ...

Radiator Cap seals the radiator filler neck and maintains the engine cooling circuit at its rated pressure. Rated at 9 lb (0.62 bar), the spring-l...

Rotor Arm for the Lucas distributor in the ignition system of the 2.0L and 2.25L 4-cylinder petrol engines (up to engine suffix C). Driven by the ...

Rotor Arm for the Lucas distributor in the ignition system of the 2.0L and 2.25L 4-cylinder petrol engines (up to engine suffix C). Driven by the ...

Rotor Arm for the Lucas distributor in the ignition system. Mounted on the distributor shaft beneath the cap, it routes the high-tension spark fro...

Rotor Arm for the distributor ignition system of the 3.5L V8 twin-carburettor petrol engine. Mounted on the distributor shaft beneath the cap, the...

Rear Wheel Cylinder (Right-Hand) is the hydraulic actuator within the rear drum brake assembly, mounted to the brake backplate. Under pedal pressu...

Rear Wheel Cylinder (Right-Hand) is the hydraulic actuator within the rear drum brake assembly, mounted to the brake backplate. Under pedal pressu...

Rear Wheel Cylinder (Left-Hand) is the hydraulic actuator within the rear drum brake assembly, mounted to the brake backplate. Under pedal pressur...

Rear Wheel Cylinder (Left-Hand) is the hydraulic actuator within the rear drum brake assembly, mounted to the brake backplate. Under pedal pressur...

Exhaust Nut in brass, securing exhaust components to their mounting studs. The 5/16" UNF thread and brass construction resist seizing and corrosio...

Capless Wedge Bulb, 12V 1.2W, for instrument, facia, clock and cigar-lighter illumination. The glass wedge base pushes directly into the panel hol...

Contact Set - Lucas Distributor is the breaker-point set for the ignition distributor. Mounted on the distributor baseplate, the points are opened...

Contact Set - Lucas Distributor is the breaker-point set for the ignition distributor. Mounted on the distributor baseplate, the points are opened...

Washer Jet Tubing is the flexible hose used within the windscreen washer system, supplied in 1 m lengths. It carries washer fluid from the reservo...

Universal Joint for the axle half shaft, allowing the shaft to transmit drive through an angle. The joint sits within the half shaft and lets it t...

Locknut for body and trim panel fixings. It seats into a pre-formed aperture in the panel to provide a captive threaded point for the screws or bo...

Locknut for body and trim panel fixings. It seats into a pre-formed aperture in the panel to provide a captive threaded point for the screws or bo...

Lock Nut is a captive plastic fastener (commonly known as a Lokut nut) that receives a No. 10 self-tapping screw. The body pushes into a square pa...

Drive Pin Fastener is a two-piece push-in fixing used to retain interior trim and ducting panels. The fastener body is pushed through aligned hole...

Spark Plug is an ignition-system component for petrol engine applications. Threaded into the cylinder head and connected to the HT lead, it delive...

Spark Plug for the ignition system of 2.5L 4-cylinder and 3.5L V8 petrol engines. The plug seals the combustion chamber and carries high-tension v...

Swivel Housing Gaiter Kit - Leather - Pair for the front axle swivel housing assembly on the Defender 90 and 110. The swivel housing gaiter seals ...

Wiper Motor for the windscreen wiper assembly. It converts the electrical supply into rotary motion, driving the wiper transmission and linkage th...

Instrument Bulb Holder for the dashboard instrument cluster on the Land Rover Defender. The bulb holder locates and retains the instrument illumin...

Gasket and Seal Kit for the LT230 transfer box, supplying the gaskets and seals needed to reseal the casing on overhaul. Used when the transfer bo...

Trim Drive Fastener for securing interior trim to the body structure. This is a blind, drive-in fastener used where trim must be retained from the...

Window Regulator Handle for the front door, operating the manual window regulator (winder mechanism) to raise and lower the door glass. The handle...

Carburettor Conversion Kit for the fuel system of the 2.25L four-cylinder petrol engine built to Detox (EGR) emission-control specification. The k...

Water reservoir grommet rubber seal

Power Steering Reservoir Cover Seal for the power steering hydraulic circuit. The seal fits between the reservoir cover and the fluid reservoir bo...

Rear Fog Lamp Lens is the red lens that fits to the rear fog lamp assembly. It seals over the bulb and reflector, colouring and diffusing the outp...

Reverse Lamp Lens is the clear lens that fits to the rear reverse (reversing) lamp assembly. It seals over the bulb and reflector and diffuses the...

Screw for securing the rear reflector, fog lamp, and reverse lamp assembly on the Land Rover Defender. Used to retain the lamp cluster components ...

Piston for the 2.25L 4-cylinder petrol engine, forming the reciprocating member within the cylinder bore that transmits combustion pressure through...

Piston for the 2.25L petrol engine, running in the cylinder bore as part of the piston and connecting-rod assembly. Supplied at standard bore size...

Piston for the 2.25L petrol engine, running in the cylinder bore as part of the piston and connecting-rod assembly. Supplied at +0.020" oversize, ...

Piston for the 2.25L four-cylinder petrol engine, machined to +0.030" oversize for a rebored cylinder block. The piston runs in the cylinder bore ...

Piston Assembly - 0.040" Oversize for the 2.25L 4-cylinder petrol engine as fitted to the Land Rover Defender and Series II, IIA, and III. Designe...

Piston for the 2.25L 4-cylinder petrol engine, forming the reciprocating member within the cylinder bore that transmits combustion pressure through...

Piston Ring Set for the 2.25L 4-cylinder petrol engine, ground to +0.010" (0.25mm) oversize for use with rebored cylinder bores. The rings seal th...

rings piston set per piston petr 2.25 +.020" os replacement per zuiger