Products

Weathershield is a front door wind and rain deflector, supplied as a pair. Each shield mounts along the top of the door window aperture and deflec...

Wheel Arch Extension Set fits over the wheel arches to widen the arch line and accommodate larger tyres. The set is supplied with the openings pre...

Upgrade and protect your Land Rover Discovery 1 (3-Door) with this high-quality fibreglass wheel arch extension kit. Designed with notches cut out ...

Rear Coil Spring for the rear suspension, a heavy-duty rating that raises ride height by approximately 40mm over standard. The increased free leng...

Rear Coil Spring for the rear suspension, raising ride height by approximately 40mm over standard. Wound from 18mm wire with a free height of 445m...

heavy duty spring front RR/disco pair, like DA4201 and TF014.

Shock Absorber - a gas-charged front damper for the suspension. Fitted between the front axle and the chassis, it damps the motion of the road spr...

Air Ram - the forward-facing intake head of a raised air intake (snorkel) system, in 3" diameter. Mounted at the top of the snorkel body, it draws...

Raised Air Intake Mantec - 90/110 200TDi

Raised Air Intake relocates the engine's air induction point from the inner wing up to roof height, feeding the air cleaner through a raised snorke...

Brake Hose Kit - Stainless Steel is a complete set of five braided stainless steel flexible brake hoses for the hydraulic braking circuit. Each fl...

Front Twin Shock Tower (Pair) - an uprated front shock absorber mounting set for coil-sprung suspension that allows a second shock absorber to be f...

Cubby Box - a centre console storage box fitted between the front seats, providing a lidded storage compartment that also serves as a centre armrest.

Rear Gas Shock Absorber - a gas-charged hydraulic damper for the rear suspension, controlling axle movement over road and off-road terrain. Matche...

Synthetic Winch Rope - 10mm x 24m - 10,000 lbs for 4x4 winch recovery. This synthetic fibre winch rope is rated to 10,000 lbs (approx. 4,536 kg) b...

Waterproofing Kit - V8 seals the ignition system of the V8 petrol engine against water and damp. The kit waterproofs the distributor and ignition ...

Front Rubber Mat is a drop-in footwell mat that protects the front floor from dirt, moisture and wear. Moulded to the contour of the front footwel...

Rear Rubber Mat Set is a set of drop-in footwell mats that protect the rear floor from dirt, moisture and wear. Moulded to the contour of the rear...

Gear Knob - Aluminium - LT77/LT85 is a machined aluminium gear knob for the main gear lever. It threads onto the gear lever of the LT77 and LT85 m...

Shock Absorber Boots are protective covers that fit over the shock absorber body to shield the shaft and seal from mud, grit and debris. Supplied ...

Bulb Holder - Clock Illumination is the socket assembly that seats the illumination bulb behind the dashboard clock, forming part of the instrument...

Blanking Plug - plastic plug sealing a 1-1/4" (32mm) diameter aperture in the rear cross member. Installs into unused or access holes in the bodys...

Door Check Pin - the pivot pin that retains the door check link (check strap) to its mounting bracket on the body pillar. The check link limits ho...

Door Check Arm Pin for the door check strap assembly. This pin secures the door check arm to its mounting bracket on the body, retaining the arm t...

Anti-Rattle Clip secures the linkage rod within the door latch and lock mechanism. It retains the lock linkage rod at its connection point, holdin...

Bolt - M6 x 30mm is a metric threaded fastener with a 6 mm nominal thread diameter and a 30 mm shank length. It secures bolted joints where an M6 ...

Bolt - M6 x 80mm is a metric threaded fastener with a 6 mm nominal thread diameter and an 80 mm shank length. It secures bolted joints where an M6...

Hex Bolt - M10 x 40mm is a metric hexagon head bolt used in the hardware and fixings range for Land Rover vehicles. Thread specification M10, leng...

Bolt, M10 x 45 mm, securing a mounting bracket to the chassis. A threaded fastener with a 10 mm metric thread and a 45 mm shank length. It forms t...

Bolt Hex-head fastener, M10 x 100mm, used as a chassis and crossmember fixing. Commonly fitted to secure the gearbox crossmember, and used across ...

Bolt - M10 x 130mm is a hex-headed metric fastener with a 10 mm nominal thread diameter and a 130 mm shank length. It serves as a general mounting...

Bolt. Hexagon-head threaded fastener for general assembly and retaining applications. Supplied individually.

Bolt - M12 x 60mm is a metric hexagon head bolt used across a wide range of assembly applications on Land Rover vehicles. Thread specification M12...

Bolt - Front Radius Arm is the M16 x 100 mm grade 10.9 high-tensile bolt that secures the front radius arm within the front suspension linkage. It...

Bolt 1/4" UNC x 1-1/4" is a coolant pump fixing bolt used on the 3.5L V8 petrol engine. It secures the coolant (water) pump to the engine within t...

Bolt - 1/4" UNC x 1-7/8" is a UNC hex head bolt used in the engine cooling and air conditioning systems of Land Rover vehicles fitted with the 3.5L...

Bolt - Water Pump is the 1/4" UNC x 2" fastener that secures the water pump to the Rover V8 engine, within the engine cooling circuit. It fixes th...

Bolt - 5/16" UNC x 4-3/4" is a hex bolt that secures the water pump and power steering pump on the Rover V8 engine. It has a 5/16" UNC thread and ...

Bolt 5/16" UNC x 5" is a long mounting bolt for the coolant pump and power steering pump on the 3.5L V8 petrol engine. Its length carries the powe...

Bolt - V8 Inlet Manifold is the fastener that secures the inlet manifold on the Rover V8 petrol engine. It clamps the inlet manifold to the cylind...

Bolt with a 3/8" UNC (Unified National Coarse) imperial thread and a 2" shank length. A hex-head fastener used in body, chassis and general assemb...

Bolt - 1/4" UNF x 1-1/4" is a UNF hexagon head bolt used in hardware and fixings applications across a wide range of Land Rover vehicles. Thread s...

Bolt 1/4" UNF x 2" is a hex-head set bolt with a 1/4-inch Unified National Fine (UNF) thread at 28 threads per inch and a 2-inch shank length. It ...

High-Tensile Bolt with a 5/16" UNF (Unified National Fine) imperial thread and a 1-1/4" shank length. A hex-head fastener manufactured to a high-t...