Products

Rear Crankshaft Oil Seal seated in the crankshaft rear oil seal housing at the back of the cylinder block, sealing the point where the crankshaft e...

Rear Main Bearing Cap Seal for the Rover V8 petrol engine, sealing the joint between the rear main bearing cap and the cylinder block. This crucif...

Head Gasket for the Td5 2.5L 5-cylinder turbo diesel engine, sealing the joint between the cylinder head and the cylinder block. It seals the comb...

Head Gasket - TD5 - 1-Hole seals the joint between the cylinder head and cylinder block on the Td5 2.5L 5-cylinder turbo diesel engine. The 1-hole...

Head Gasket for the Td5 2.5L 5-cylinder turbo diesel engine, sealing the joint between the cylinder head and the cylinder block. It seals the comb...

Cylinder Head Gasket for the Rover V8 petrol engine, sealing the joint between one cylinder head and the engine block. It seals the combustion cha...

Rocker Cover Gasket for the Rover V8 petrol engine, sealing the rocker (valve) cover to the cylinder head. The gasket seats between the cover flan...

Rocker Cover Gasket for the Rover V8 petrol engine, sealing the rocker (valve) cover to the cylinder head. The gasket seats between the cover flan...

Sump Gasket for the Rover V8 4.0 and 4.6 petrol engine, sealing the oil sump to the underside of the cylinder block. This is the one-piece rubber-...

Sump Gasket for the Rover V8 4.0 and 4.6 petrol engine, sealing the oil sump to the underside of the cylinder block. This is the one-piece rubber-...

Sump Gasket for the Td5 2.5L 5-cylinder turbo diesel engine. It seals the joint between the oil sump and the cylinder block within the engine lubri...

Sump Gasket for the Td5 2.5L 5-cylinder turbo diesel engine. It seals the joint between the oil sump and the cylinder block within the engine lubri...

Oil Pump Gasket for the Td5 2.5L 5-cylinder turbo diesel engine, sealing the oil pump to its mounting face on the engine. It forms the oil-tight j...

Oil Filter Housing Gasket for the Td5 2.5L five-cylinder turbo diesel engine, sealing the oil filter housing/adaptor to the cylinder block. It sea...

Thermostat Gasket for the Td5 2.5L 5-cylinder turbo diesel engine, sealing the coolant outlet elbow to the thermostat housing. It forms the coolan...

Thermostat Gasket for the Td5 2.5L 5-cylinder turbo diesel engine, sealing the coolant outlet elbow to the thermostat housing. It forms the coolan...

Camshaft gasket TD5 1A622423 on

Gasket - Cover

Sealing Washer seals the timing chain tensioner at the point where it threads into the engine, forming a leak-tight joint at the tensioner mounting...

Cam Cover Bolt for the Td5 2.5L 5-cylinder turbo diesel engine, securing the camshaft cover to the cylinder head. This is the flanged-head bolt th...

Cam Cover Bolt for the Td5 2.5L 5-cylinder turbo diesel engine, securing the camshaft cover to the cylinder head. This is the flanged-head bolt th...

Crankshaft Pulley Bolt for the Td5 2.5L five-cylinder turbo diesel engine, securing the crankshaft pulley and torsional vibration damper to the nos...

Crankshaft Pulley Bolt for the Td5 2.5L five-cylinder turbo diesel engine, securing the crankshaft pulley and torsional vibration damper to the nos...

Flanged Hex Bolt securing the lower inlet manifold on the V8 EFI petrol engine. The integral flange under the head spreads the clamping load acros...

Rocker Shaft Bolt for the Td5 2.5L 5-cylinder turbo diesel engine, securing the rocker shaft assembly to the cylinder head. It clamps the rocker s...

Oil Pump Bolt for the Td5 2.5L 5-cylinder turbo diesel engine, securing the oil pump to its mounting on the engine. It clamps the pump body agains...

Inlet Manifold Insert - press-in insert that forms the vacuum take-off union in the upper inlet manifold. The insert is pressed into a machined bo...

Hex Nut - M8 is a standard six-sided metric threaded fastener with an 8 mm nominal thread diameter. It threads onto a matching M8 bolt or stud to ...

Spring Washer, M8, a split ring washer used with M8 bolts and nuts to prevent fastener loosening caused by vibration and cyclical loading. The spl...

Fuel Strainer - gauze strainer for the fuel pressure regulator in the cylinder head fuel block of the Td5 2.5L five-cylinder turbo diesel. Fuel de...

Injector Clamp Bolt for the Td5 2.5L 5-cylinder turbo diesel engine. It secures the injector clamp to the cylinder head, holding the fuel injector ...

Sealing Washer - 18 mm OD x 12 mm ID is a sealing washer with a 12 mm inner diameter and an 18 mm outer diameter, used to seal threaded unions and ...

Engine coolant temperature sensor for the Bosch engine management system on the 4.0L and 4.6L EFi Rover V8 petrol engine. The sensor threads into ...

Engine coolant temperature sensor for the Bosch engine management system on the 4.0L and 4.6L EFi Rover V8 petrol engine. The sensor threads into ...

Temperature Sensor is the engine coolant temperature sensor for the V8 EFI petrol engine, mounted in the inlet manifold coolant passage. It measur...

Throttle body heater assembly OEM

Throttle body heater plate for the 4.0L and 4.6L EFi Rover V8 petrol engine, fitted to the underside of the throttle body. The plate carries engin...

Air flow meter TD5 replacement

Air flow meter TD5 OEM VDO /Delphi

Temp Sensor

sensor MAP TD5 manifold pressure

Air Flow Sensor - V8 is the mass air flow (MAF) sensor for the V8 EFI petrol engine, forming part of the air cleaner and intake assembly. Mounted ...

Air Flow Sensor - V8 is the mass air flow (MAF) sensor for the V8 EFI petrol engine, forming part of the air cleaner and intake assembly. Mounted ...

Air Flow Sensor - V8 is the mass air flow (MAF) sensor for the V8 EFI petrol engine, forming part of the air cleaner and intake assembly. Mounted ...

Air Flow Sensor - V8 is the mass air flow (MAF) sensor for the V8 EFI petrol engine, forming part of the air cleaner and intake assembly. Mounted ...