Products

Screw - a self-tapping pan-head fastener used in interior trim assembly. It cuts its own thread into the panel or moulded mounting boss to secure ...

Self-Tapping Screw - Black is an M8 x 25mm self-tapping screw with a black finish. The self-tapping thread cuts its own mating thread as it is dri...

Self-Tapping Screw - a fastener that forms its own mating thread as it is driven, allowing a panel or housing to be secured without a pre-tapped ho...

Front Spring Spacer Kit for the coil-spring front suspension, supplied as a pair of spacer blocks that seat on the front coil springs to raise ride...

Rear Spring Spacer providing approximately 2 inches (50mm) of lift at the rear axle, for models fitted with rear air suspension. Fitted at the rea...

Wheel Adaptor Kit, supplied as a set of four. The adaptors mount to the existing hubs and re-centre the wheel, allowing alloy wheels of the same st...

USB Charging Socket - a dashboard-mounted charging socket that fits a standard factory switch aperture, giving a flush, integrated appearance in pl...

LED Clear Side Repeater (Pair)

LED Side Repeater is an amber side repeater lamp within the exterior signalling circuit, mounted in the front wing aperture. Each lamp provides la...

Side Steps Including. Mudflaps Rear

Oil Filler Cap for the Td5 2.5L 5-cylinder turbo diesel engine. Machined from aluminium with a blue anodised finish and fitted with a rubber sealin...

Rear Chassis Leg - a 600 mm repair section for the nearside (left-hand) rear chassis rail. Replaces the corroded rear end of the chassis rail, cut...

Rear Chassis Leg - a 600 mm repair section for the offside (right-hand) rear chassis rail. Replaces the corroded rear end of the chassis rail, cut...

TD5 Engine Designation Decal - silver, approximately 13 cm - for Td5-engined Land Rover models. This is the silver adhesive "TD5" lettering decal ...

Land Rover Oval Name Badge - exterior identification emblem carrying the Land Rover name in gold lettering on a green ground. Fitted to the front ...

Land Rover Oval Name Badge - Plastic - exterior identification emblem carrying the Land Rover name in gold lettering on a green ground, moulded in ...

Bonnet Decal - Silver - self-adhesive exterior decal applied to the bonnet, finished in silver.

"Td5" Badge - engine-designation badge identifying the Td5 diesel engine variant. Applied to the exterior body as an engine identifier.

Roller Fairlead - zinc coated - for steel cable winches. This four-roller fairlead mounts to the front of a winch bumper and guides the steel cabl...

A-Pillar Trim Strip is an exterior body finisher fitted along the A-pillar, covering the joint between the pillar and the roof panel. Supplied in ...

Finisher

Front Shock Absorber fits in the front suspension, damping spring oscillation and axle movement to keep the tyres in contact with the road surface....

Technical Specifications: Fitment: Discovery 2 Type: Front Gas Shock Absorber Lift: +50mm Bore Tube: 35mm Open/Closed Dimensions: 640mm /...

Rear Shock Absorber fits in the rear suspension, damping spring and axle movement to keep the tyres in contact with the road surface. Gas-charged ...

Rear Shock Absorber - +50mm Lift - gas-charged hydraulic damper for the rear axle, valved for a +50mm (2") raised suspension ride height. Built on...

Steering Damper mounts across the steering linkage to absorb shocks and damp oscillation (bump steer and wheel shimmy) fed back through the track r...

Shock Absorber A front suspension damper of foam cell (cellular dynamic) construction. It mounts between the axle and the chassis to control spring...

Shock Absorber A rear suspension damper of foam cell (cellular dynamic) construction. It mounts between the axle and the chassis to control spring ...

Poly Bush Kit - a polyurethane suspension bush set for the chassis and suspension linkages. The kit replaces the original rubber suspension bushes...

Bump Stop Kit A set of four extended polyurethane bump stops, 90 mm high, in yellow. Bump stops sit between the axle and the chassis and cushion th...

Polyurethane Bush Kit - a complete-vehicle suspension bush set that replaces the rubber mounting bushes throughout the axle-location linkages. The...

Bump Stop Kit for the suspension, supplied as a set of four standard-height bump stops. The bump stop limits axle-to-chassis travel at full suspen...

Extended Bump Stop Kit - black polyurethane bump stops of 90 mm extended height, for the front and rear suspension. Bump stops mount to the chassi...

Windscreen Finisher - the exterior trim moulding that finishes the upper edge of the front windscreen. Covers the top windscreen seal and the join...

A-Post Finisher - Outer (Right Hand) - the off-side outer exterior trim that caps the windscreen A-pillar, running down the side of the windscreen ...

A-Post Trim Finisher - Left Hand - the near-side exterior trim that caps the windscreen A-pillar, running down the side of the windscreen aperture....

Windscreen Pillar Moulding - the exterior A-pillar finisher that covers the left-hand windscreen pillar. This outer moulding fits over the front p...

Rear Tonneau Finisher - the textured-black rear quarter moulding that trims the rear body panel on the left-hand side. This exterior finisher fits...

Rear Tonneau Finisher - the textured-black rear quarter moulding that trims the rear body panel on the left-hand side. This exterior finisher fits...

D-Pillar Trim An exterior bodyside finisher for the D-post, the rearmost pillar of the body. It fits over the D-pillar to provide a finished exteri...

Trim - D Pillar

Wheel Arch Moulding is an exterior trim flare fitted over the front wheel arch, extending the arch lip and covering its exposed edge. It protects ...

Wheel Arch Moulding is an exterior trim flare fitted over the front wheel arch, extending the arch lip and covering its exposed edge. It protects ...