for Discounts / VAT
for Discounts & Correct VAT
Fuel Return Pipe (Injector Leak-Off) in the fuel injection return circuit of the 2.2L diesel engine. The pipe collects leak-off fuel from the inje...
View full detailsOil - Differential
Pump Drive Coupling for the 2.0L 16V Ti-VCT turbocharged petrol engine. Mounted at the camshaft drive, it transmits rotational drive from the cams...
View full detailsBrake Fluid for the hydraulic braking and clutch actuation system, supplied in a 1 litre container. A DOT 4 low-viscosity (ESL) fluid formulated f...
View full detailsMetal Name Plate is an exterior badge fitted to the bodywork. It mounts to the body panel as a model or trim identifier and forms part of the vehic...
View full detailsO-Ring seals a connection joint in the front air conditioning refrigerant circuit. It maintains the pressure-tight seal between refrigerant lines o...
View full detailsTransmission Fluid is the specified fluid for the electronically controlled all-wheel-drive coupling (Haldex-type) used on transverse-engine models...
View full detailsCoolant Hose - Outlet routes engine coolant within the cooling circuit of the 2.0L 16V TIVCT turbocharged petrol (Si4) engine. It carries coolant ...
View full detailsPollen Filter for the heater and ventilation assembly. This cabin air filter installs within the heater assembly, filtering the air drawn into the...
View full detailsFuel Supply and Vapour Tube forming part of the underfloor fuel delivery and evaporative emission system on the 2.0L TIVCT turbocharged petrol engi...
View full detailsIntake Manifold Gasket sealing the intake manifold to the cylinder head on the 2.0L TIVCT turbocharged petrol engine (Gen2). It maintains an airti...
View full detailsClimate Control Humidity Sensor, an input device for the automatic climate control system. Mounted at the base of the interior rear-view mirror, i...
View full detailsCV Boot Kit - Rear A repair kit for the constant-velocity (CV) joint boot on the rear driveshaft, part of the rear axle drive assembly. The CV boo...
View full detailsFront Brake Disc - internally vented, 325mm diameter, supplied singly. The disc bolts to the front hub and forms the friction surface for the fron...
View full detailsDegas Coolant Hose for the engine cooling system on the 2.0L 16V GTDi Petrol. This hose forms the degas line, running from the top of the radiator...
View full detailsParking Camera, part of the surround camera and parking assistance system. It captures the video feed used by the driver assistance display during...
View full detailsBump Stop for the rear suspension, fitted at the shock absorber. The bump stop cushions the end of suspension travel under full compression, absor...
View full detailsElectronic Parking Brake Actuator for the rear brake caliper, part of the electronic parking brake (EPB) system. The actuator is a self-contained ...
View full detailsBrake Disc for the rear axle, 300 mm diameter. The disc mounts to the rear hub and provides the friction surface for the rear brake pads.
Transmission Extension Housing supplied with its mounting insulator, part of the transmission mounting assembly. The housing bolts to the rear of ...
View full detailsCoolant Hose for the engine cooling system on the 2.0L 16V TiVCT turbocharged Petrol. This hose carries coolant within the cooling circuit, connec...
View full detailsWeatherstrip for the roof panel. This sealing strip runs along the roof panel edge, sealing the joint against water and wind ingress and helping to...
View full detailsWiper Blade - LH is the left-hand front windscreen wiper blade, fitted to right-hand-drive vehicles.
Wiper Blade - RH is the right-hand front windscreen wiper blade, fitted to left-hand-drive vehicles.
Rear Wiper Blade for the tailgate wash/wipe system. It mounts to the rear wiper arm and sweeps the rear screen to clear rain and road spray for rea...
View full detailsFuel Pump and Sender Unit for the in-tank fuel delivery assembly on 2.0L petrol engines. Mounted inside the fuel tank, it draws fuel and supplies i...
View full detailsBonnet Latch – left-hand (LH) side, part of the bonnet locking mechanism at the front of the vehicle. The latch engages the bonnet striker to hold...
View full detailsFuel Pump and Sender Unit for the in-tank fuel delivery assembly on 1.5L and 2.0L petrol engines. Mounted inside the fuel tank, it draws fuel and s...
View full detailsIntercooler Hose for the 2.2L common-rail turbo-diesel charge-air system. It routes pressurised charge air through the intercooler circuit, carryi...
View full detailsSpeaker Grille for a headlining-mounted speaker. This is the finishing grille that covers a roof speaker set into the headlining, concealing the s...
View full detailsScrew - M6 x 25mm threaded fastener used across the 2.0L Ingenium petrol engine assembly. Secures components at the timing gear, fuel injector, wa...
View full detailsTransfer Shift Control Module - electronic control unit for the all-wheel-drive transfer system on vehicles with the 9-speed automatic transmission...
View full detailsWheel Centre Cap - a black alloy-wheel centre cap carrying the Land Rover oval in green and silver. It presses into the centre bore of an alloy wh...
View full detailsWheel Centre Cap for the alloy road wheel. This cover fits to the hub centre of the alloy wheel, closing off the centre bore and completing the wh...
View full detailsCamshaft Cover for the 2.0L 16V turbocharged petrol engine (Gen2), also known as the rocker cover. It seals the top of the cylinder head over the ...
View full detailsSolenoid Switch for the centre console switch pack, serving as the engine start-stop control. Mounted in the console and facia switchgear, it sign...
View full detailsTransfer Shift Control Module within the all-wheel-drive driveline control system. The module governs the power transfer unit, controlling how dri...
View full detailsTyre Pressure Sensor (TPMS) for the direct tyre pressure monitoring system. Fitted at the wheel valve inside the tyre, it measures tyre pressure an...
View full detailsElement - Air Cleaner
Coolant Degas Hose for the engine cooling system, forming part of the deaeration (degas) circuit. The hose carries coolant and entrained air betwe...
View full detailsTurbocharger Gasket for the exhaust turbocharger assembly on the 2.0L I4 diesel (AJ200) engine, sealing the turbocharger outlet to the exhaust fron...
View full detailsShock Absorber Boot for the suspension damper assembly. The boot sheaths the exposed damper piston rod, shielding it from grit, moisture and road ...
View full detailsCylinder Head Bolt with hex head, for the 2.0L I4 diesel (AJ200) engine. The bolt secures the cylinder head to the engine block, providing the cla...
View full detailsOil Filter Gasket Kit for the engine oil filtration circuit of the 2.0L Ingenium (AJ200) engine, renewed with the oil filter element at each servic...
View full detailsCopper Sealing Washer for the turbocharger oil feed on the 2.0L Ingenium (AJ200) engine. The washer seals the banjo union on the turbocharger oil ...
View full detailsOil Drain Plug for the engine oil pan (sump). Threaded into the base of the oil pan, it seals the oil drain point and is removed to drain the engi...
View full detailsO-Ring for the turbocharger of the 2.0L I4 diesel (AJ200) engine, sealing the upper turbocharger-to-pipe joint (14.3 x 2.4 mm). The O-ring seals t...
View full detailsO-Ring sealing a turbocharger oil and coolant connection within the turbocharger lubrication and cooling circuit. It seals the union at the turboc...
View full details