Products

Grommet - a moulded rubber grommet fitted into an aperture in the body. It lines and seals the opening, providing a finished edge and helping to k...

O-Ring - A/C Compressor seals the refrigerant line connection at the air conditioning compressor. It forms the gas-tight joint between the compres...

O-Ring - a 22.5 mm sealing ring used in the air conditioning refrigerant circuit. It seals a connection on the condenser and compressor side of th...

Air Conditioning O-Ring, 13.7 x 2.5mm, for the R134a refrigerant circuit. It seals a line connection in the front air-conditioning system on the c...

Transmission Shaft Sleeve for the AWF21 six-speed automatic transmission on all-wheel-drive applications. The sleeve houses and locates the transm...

Cam Cover Gasket - seals the camshaft cover to the cylinder head on the 2.2L TD4 diesel engine (DW12). It forms the oil-tight joint at the top of ...

Anti-Roll Bar Link - Rear connects the rear anti-roll (stabiliser) bar to the suspension, within the rear cross member and stabiliser bar assembly....

O-Ring - Haldex to Rear Differential seals the joint between the Haldex coupling and the rear differential in the all-wheel-drive driveline. The 1...

Transmission Oil Cooler for the 6-speed AWF21 automatic gearbox. Dissipates heat from the automatic transmission fluid to keep the gearbox within ...

Sealing Ring - Input Shaft is an O-ring seal fitted to the input shaft of the M66 six-speed manual transmission. It seals the joint where the inpu...

Axle Case Seal - Front seals the front axle case (final drive housing) around the driveshaft where it passes through the case. It retains the diff...

Sump Drain Plug for the 2.2L DW12 Td4 diesel engine oil pan. Threaded into the base of the sump, it is removed to drain the engine oil during a se...

Transmission Drain Plug for the automatic transmission. Seals the fluid drain point on the AWF21 6-speed automatic transmission. Removed to drain ...

Disc Brake Front Frl2, Evoque

Gasket polygon shape type. cover

Front spring pad for the front suspension strut and coil spring assembly. The pad is an elastomer insulator that seats between the end of the coil...

Connector

Water Pump for the engine cooling circuit. The pump circulates coolant through the cylinder block, cylinder head and radiator to maintain engine op...

Clutch slave cylinder assembly

Windscreen Washer Pump - the combined motor and pump unit mounted in the washer reservoir, part of the Windscreen Wash and Wipe system. When the w...

Starter Motor for the 2.2L Td4 diesel engine (DW12), part of the engine starting system. It cranks the engine through a pinion that engages the ri...

Brake Caliper for the right-hand front, part of the front disc brake assembly. It mounts over the brake disc and houses the hydraulic pistons and ...

Front Brake Caliper for the left-hand side, part of the front disc brake assembly. The caliper mounts over the front brake disc and houses the hyd...

Parking Sensor for the park distance control (PDC) system, used in both front and rear bumper positions. The sensor mounts into its aperture in th...

Brake Caliper Guide Pin Dust Cover for the front and rear brake calipers. The boot fits over the caliper guide pin and seals against the carrier b...

Cylinder Head Gasket seals the joint between the cylinder head and the cylinder block on the 2.2L 16V common-rail diesel engine (DW12), containing ...

Heater Hose

Mass Air Flow (MAF) Sensor mounted in the air intake tract, downstream of the air cleaner. It measures the mass of air drawn into the engine and s...

Clutch Slave Cylinder Assembly Concentric (hydraulic) clutch slave cylinder for the six-speed manual gearbox. Mounted concentrically around the ge...

Oil Pump for the 2.2L DW12 diesel engine, part of the engine lubrication system. Driven from the crankshaft, it draws oil from the sump and delive...

EGR Gasket for the 2.2L diesel engine, part of the exhaust gas recirculation (EGR) system. Seals a joint in the EGR circuit, maintaining a gas-tig...

Sensor Assembly

Ride Height Sensor for the suspension and automatic headlamp levelling system. This sensor measures ride height at the rear left-hand corner of th...

Ride Height Sensor for the front right-hand corner of the air suspension system. The sensor mounts between the body and a suspension link, and mea...

Sensor Assembly

Sensor Assembly

Ride Height Sensor Assembly for the rear right-hand suspension, forming part of the automatic headlamp levelling system. It measures the rear susp...

Hose - Radiator

Hose

Tank - Radiator Overflow

Wheel Hub for the rear axle assembly. The hub mounts to the rear suspension upright and carries the road wheel and brake disc on its machined flan...

Bump Stop for the front suspension. Mounted on the damper, the bump stop cushions the end of suspension travel, absorbing the impact as the wheel ...

Coil Spring for the front suspension. The coil spring supports the vehicle's weight at the front axle and maintains ride height, working with the ...

Intercooler Hose forms part of the charge-air ducting on the 2.2L diesel engine. It connects the turbocharger outlet to the intercooler, carrying ...