Products

Engine Mounting is the insulator that supports the engine on its mounting and isolates vibration from the body. It locates the engine to the subfr...

Throttle Body Assembly for the 2.0L Si4 240PS turbocharged petrol engine, mounted in the air intake tract between the intake ducting and the inlet ...

Cylinder Head Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the cylinder head and the engine block. It conta...

Front Wheel Hub Assembly for the front suspension corner. The hub carries the road wheel and, through its integral bearing, lets the wheel rotate ...

Exterior Rear View Mirror Glass for the left-hand (LH) door mirror. Replacement glass that clips onto the mirror adjuster backing plate within the...

Timing Chain for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It forms part of the engine's timing drive, running between th...

Lower Rear Knuckle Bush locates the rear suspension knuckle to its lower suspension arm. Flexible mounting bush fitted at the lower link of the re...

Oil Cooler dissipates heat from the engine oil to help maintain a stable oil operating temperature. Fitted in the lubrication circuit of the 2.0L ...

Turbocharger Water Inlet Gasket seals the coolant inlet connection at the turbocharger. It fits between the coolant feed union and the turbocharger...

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

Valve Cover Gasket seals the cylinder head cover (rocker cover) to the cylinder head on the 2.0L 16V petrol engine. It forms the oil-tight joint a...

Windshield Washer Reservoir stores washer fluid for the windscreen and headlamp washing systems. It houses the washer pump(s) and supplies the win...

Strap - Fuel Tank

Starter Motor Puma Replacement - Defender

Window Switch is the left-hand door control unit for the electric windows. This double switch operates two windows from a single left-hand door pa...

Fuel Sender Cover for the fuel tank sender unit. It fits over the sender module aperture in the fuel tank, enclosing the fuel level sender assembly...

Steering Rack Connecting Rod (inner tie rod) in the steering linkage. It threads onto the end of the steering rack and connects to the outer tie ro...

Rear Brake Caliper, left-hand side, supplied without brake pads. The caliper houses the piston that clamps the brake pads against the disc under h...

Rear Brake Caliper, supplied without brake pads. The caliper houses the piston that clamps the brake pads against the disc under hydraulic pressur...

Thermostat and Housing for the 2.0L 16V Ti-VCT petrol engine, supplied complete as a sealed assembly. It sits in the engine cooling circuit and reg...

Trim Clip - push-fit fastener securing exterior body mouldings, front and rear bumper trim and the radiator grille to the body panels. Renews an o...

Track Rod End is the ball-joint assembly at the outer end of the steering track rod, connecting the steering linkage to the front hub carrier. The...

Tow Hook Cover for the front bumper. Fills the tow hook aperture in the front bumper when a tow hook or recovery hook is not fitted. Maintains the...

Accessory Drive Idler Pulley in the front end accessory drive (FEAD) belt system of the 2.0L 16V turbocharged petrol engine. The idler pulley guid...

Body Moulding Retainer Clip, a lantern-type fastener for the vehicle's exterior trim. The clip secures exterior body mouldings - such as the rocke...

Air Filter element for the engine air intake system. Fitted within the air filter housing, the element removes airborne dust and particulate matte...

oil filter OEM Hengst Fits: - Defender Puma 2.2L - Defender Puma 2.4L - Discovery Sport 2.2L D 16V - Freelander2 2.2L D 16V - Range Rover Evoque 2...

Anti-Roll Bar Bush is the insulator bush that clamps the anti-roll bar into its chassis mounting bracket. It locates the bar while allowing it to ...

Turbocharger Oil Return Hose Gasket for the 2.0L Si4 TIVCT petrol turbo engine. It seals the joint at the turbocharger oil return (drain) hose, al...

Oil Filter Adaptor for the rear-drive Haldex coupling (Active On-Demand Coupling) in the all-wheel-drive driveline. The filter keeps the oil in th...

Timing belt kit with water pump OEM

Retaining Clip - a push-in trim retainer used to secure exterior mouldings and interior finisher panels. The nylon clip pushes into an 8 mm mounti...

Drive Belt Tensioner Pulley for the auxiliary (accessory) drive belt. The pulley bears against the drive belt, maintaining correct tension as the ...

Fuel Pump Support Housing Seal seals the mounting interface of the high-pressure fuel pump support housing on 2.0L Si4 petrol engines. The high-pr...

Anti-Roll Bar Bush for the suspension stabiliser (anti-roll) bar mounting. The bush clamps around the anti-roll bar where it attaches to the body,...

Wheel Arch Cladding for the right-hand front wheel arch, part of the exterior body trim. The moulding fits over the front wheel arch lip to protec...

Wheel Arch Cladding for the left-hand front wheel arch, the moulded trim covering the arch lip and lower body edge. The cladding shields the arch ...

Parking Sensor is an ultrasonic sensor for the Park Distance Control (parking aid) system. Mounted in the bumper, it emits and receives ultrasonic...

Rear Wiper Blade for the tailgate window. It fits onto the rear wiper arm and sweeps the rear screen to maintain visibility through the tailgate gl...

Engine Mount Insulator for the engine support and mounting system. This rear lower insulator supports the engine on its mounting and isolates engi...

Vacuum Pump Seal - the sealing ring for the engine-mounted vacuum pump. The vacuum pump generates the vacuum used by the brake servo; this seal cl...

Radiator is the engine coolant radiator for 2.2L diesel applications. It dissipates heat from the engine coolant as it flows through the core, mai...

Vibration Damper is the lower anti-vibration element for the rear shock absorber, part of the rear suspension assembly. It fits at the base of the...

Fuel Tank Heat Shield is the underbody heat barrier fitted between the exhaust system and the fuel tank. It reflects and insulates against radiant...

Fuel Tank Heat Shield is the underbody heat barrier fitted between the exhaust system and the fuel tank. It reflects and insulates against radiant...

Door Mirror Cover - exterior housing cover for the right-hand door mirror assembly, forming the outer shell of the mirror body. Supplied primed an...

Front Tow Hook Cover is the trim cap that fills the towing-eye aperture in the front bumper. It clips into the bumper opening to conceal the threa...