Products

Flanged Bolt - M12 x 100 flanged fixing that secures the front radius arm to the axle. The integral flange head spreads the clamping load across th...

Flanged Bolt secures the steering damper bush at the steering damper mounting. The flange spreads the clamp load across the bush, retaining the da...

Brake Valve - a pressure reducing valve in the hydraulic brake circuit, controlling rear-circuit pressure to set the front-to-rear brake balance. ...

Brake Pipe is the left-hand rigid brake pipe in the front hydraulic braking circuit, for left-hand-drive applications. It connects the master cyli...

Hose - Brake

Rear Brake Pipe Clip retains and locates the rigid brake pipes along the rear of the chassis. It holds the brake lines securely against the chassi...

Power Steering Pump is the engine-driven hydraulic pump at the heart of the power-assisted steering circuit on the 300 TDi 2.5L turbo diesel. Belt...

Hose

Radius Arm Bush - front radius arm mounting bush at the chassis end of the arm. It locates and insulates the radius arm where it attaches to the ch...

Steering Damper - hydraulic steering damper supplied with its mounting bushes. Fitted across the steering linkage, it damps shocks and vibration f...

Clutch Master Cylinder for the clutch hydraulic circuit, installed at the pedal box. The cylinder converts mechanical clutch-pedal movement into h...

Nyloc Nut - M16 flanged self-locking nut used at suspension link fastenings. The integral flange spreads the clamp load across the joint face and ...

Brake Valve for the front brake hydraulic circuit. Regulates hydraulic pressure to the front brakes and is used on both ABS and non-ABS systems.

Brake Valve for the front brake hydraulic circuit. Regulates hydraulic pressure to the front brakes and is used on both ABS and non-ABS systems.

Anti-Roll Bar Link Assembly connects the front anti-roll bar to the suspension, forming part of the front stabiliser linkage. As the vehicle corne...

Anti-Roll Bar Link Assembly connects the front anti-roll bar to the suspension, forming part of the front stabiliser linkage. As the vehicle corne...

Anti-Roll Bar Bush is the front mounting bush that locates the anti-roll bar to the chassis. It cradles the bar within its chassis mounting clamp,...

Radius Arm Bush is the compliant bush at the axle end of the front radius arm, where the arm mounts to the axle. The front radius arms locate the ...

Panhard Rod Bush for the front suspension lateral location assembly. This rubber bush is pressed into the Panhard rod eye and provides the complia...

Road Spring is a coil spring located at the suspension bottom link. It carries the vehicle load and maintains ride height, absorbing road inputs t...

Spring Seat is the lower seat for the rear coil spring, forming the located surface that the base of the spring sits on. It positions and retains ...

Tow Hook Cover is a protective cover for the 50mm tow hook. It fits over the towing hook to protect it when not in use and to give a finished appe...

Compressor assembly P38

Compressor for the electronic air suspension system, supplying the compressed air that pressurises the air springs. The compressor draws in and pr...

Drag Link Tube is the central tube of the steering drag link, for left-hand-drive applications. It carries the track rod ends that connect the ste...

Drive Box - Air Suspension - the electronic control unit (ECU) of the Electronic Air Suspension (EAS) system, mounted adjacent to the valve block. ...

EAS Pressure Switch monitors air pressure within the electronic air suspension (EAS) system and signals the control unit when the reservoir reaches...

Wheel Centre Trim Cover for steel road wheels. This black plastic cap fits into the centre of each steel road wheel, covering the wheel fixings an...

Stabiliser Bar Link Bush is fitted at the anti-roll bar link within the suspension. It cushions the connection between the stabiliser (anti-roll) ...

Rubber Mount is an axle assembly mounting bush. It isolates the axle-mounted assembly from the surrounding structure, absorbing vibration and cush...

Suspension Link Bush is the rear upper A-frame bush, fitted at the chassis-side mounting of the A-frame that locates the rear axle. It cushions an...

Air Suspension Compressor Assembly supplies pressurised air to the Electronic Air Suspension (EAS) system, inflating the air springs to raise the v...

Panhard Rod Bolt - M16 × 70mm flanged hexagonal head. This bolt secures the panhard rod at its mounting bracket, retaining the rod that locates th...

Hydraulic Jack & Handle - the vehicle-supplied lifting equipment carried in the on-board tool kit for wheel changes and roadside servicing. Th...

Rear Suspension Bolt Protector Strap serving the rear anti-roll bar mounting. The strap shields the anti-roll bar mounting bolt from impact and de...

Steel Road Wheel is a welded steel road wheel with a 6.5 x 16 inch rim, finished in black with a Wolf-style profile for road use with tubeless tyre...

Clutch Master Cylinder - the input actuator of the hydraulic clutch release circuit. It mounts on the pedal box and converts clutch pedal travel in...

Steel Road Wheel, 5.5J x 16, of welded construction for tube-type tyre fitment. The rim is designed to run with an inner tube rather than a tubele...