Genuine Land Rover Parts

Gearbox Plug

Accessory Drive Belt for the engine accessory (ancillary) drive on 3.0L V6 supercharged and 5.0L V8 AJ133 supercharged petrol engines. The belt is...

Secondary Accessory Drive Belt - the supercharger drive belt within the front end accessory drive of the supercharged petrol V6 and V8 engines. Th...

Drive Belt Tensioner - engine front-end accessory drive. Sprung arm carrying an idler pulley that maintains correct tension on the accessory drive...

Blanking Plug - timing chain cover, supplied with its O-ring. Seals a machined service aperture in the timing chain cover of the Ingenium engine f...

Water Outlet Hose - lower return hose in the turbocharger lubrication and cooling circuit. Carries coolant from the turbocharger bearing housing b...

Water Connection for the turbocharger coolant feed, lower position, in the turbocharger lubrication and cooling circuit of the 3.0L AJ20P6 Ingenium...

Coolant Degas Separator, part of the engine cooling circuit on 2.0L Ingenium (AJ200) petrol applications. The degas separator removes entrained ai...

Connecting Tube running from the thermostat housing to the EGR cooler, part of the engine coolant circuit on the 2.0L Ingenium petrol engine and it...

Cylinder Head Gasket - 5.0L V8 seals the joint between the cylinder head and the engine block on the 5.0L V8 petrol engine. It maintains the seal ...

Auxiliary Radiator for the engine cooling system, mounted in the front wheel arch area alongside the main radiator pack. This is the right-hand uni...

Antifreeze and Coolant Concentrate - red, extended-life engine coolant concentrate for the cooling system, supplied in a 1 litre container. The fl...

Thermostat Housing - engine cooling circuit component for the 3.0L Ingenium six-cylinder petrol engine (AJ20P6 / AJ22P6). The housing carries the ...

Seal Kit - Torque Converter - 8-Speed Auto

Inlet Manifold distributes incoming charge air to the cylinder head inlet ports, forming part of the air intake system on the 3.0L V6 diesel engine...

Front wheel hub with bearing, part of the front knuckle and hub assembly. The hub locates in the steering knuckle and carries the road wheel and b...

Wheel Bearing - Rear, a component of the rear hub assembly. The rear wheel bearing carries the vehicle's rear load and allows the road wheel and h...

Spark plug for the ignition system of the Ingenium petrol engine range - 1.5L AJ20P3, 2.0L AJ20P4 / AJ200P and 3.0L AJ20P6 / AJ22P6, including plug...

Variable Timing Solenoid - camshaft timing oil control valve in the variable valve timing system of the Ingenium engine range. The solenoid is an ...

Coolant Expansion Tank Cap - pressure cap sealing the coolant expansion (overflow) container in the engine cooling circuit. The cap is a working c...

Air Suspension Levelling Valve - rear valve block in the four-corner electronic air suspension circuit. It sits between the compressor and reservo...

Air Suspension Levelling Valve - front valve block in the four-corner electronic air suspension circuit. It sits between the compressor and reserv...

Coolant Hose - moulded hose within the engine cooling circuit. It carries coolant between the engine and the radiator and expansion circuit, pre-f...

Purge Control Valve - evaporative emission (EVAP) control system. The valve sits in the line between the activated carbon canister and the engine ...

Connection - Water

Fuel Vapour Valve (Purge Control Valve) - electrically operated solenoid valve in the evaporative emission control (EVAP) system, for supercharged ...

Coolant outlet tube forming the water outlet connection at the cylinder head, in the engine cooling circuit of the 2.0L I4 AJ200 Ingenium petrol en...

Balance Shaft - counterweighted shaft forming part of the engine balancer assembly in the lower block. Driven from the crankshaft and running at t...

PCV Valve Service Kit

Camshaft Cover Gasket - sealing gasket between the camshaft cover and the cylinder head face, for 2.7L Td6 and 3.0L V6 diesel engines. The gasket ...

Rear Brake Disc - 325 mm disc for the rear axle service brake assembly. The disc locates on the rear wheel hub flange and forms the friction surfa...

Front brake disc, 350mm diameter, internally vented, forming part of the front brake disc and caliper assembly. Mounted to the front hub, the disc...

Drive Belt Tensioner - automatic tensioner for the front-end accessory drive on the AJ20 Ingenium petrol engine range. A spring-loaded pivoting ar...

Supercharger Isolator - the torsional damping coupler inside the supercharger drive, sitting between the drive input and the rotor pack of the Root...

Brake Pad Kit - Rear

Brake Pad Kit - Rear

Rear Brake Pad Kit - the friction pads that sit in the rear brake caliper and clamp the rear brake disc, forming the wear interface of the rear dis...

Brake Pads - Front - Less Springs - friction pads for the front axle, supplied as a complete axle set (one set per axle). The pads locate in the f...

Brake Pads - Front - Less Springs - friction pads for the front axle, supplied as a complete axle set (one set per axle). The pads locate in the f...

Tyre Pressure Sensor - wheel-mounted pressure and temperature sensor for the Tyre Pressure Monitoring System (TPMS). Mounted at the valve position...

O-Ring - VVT Solenoid Cover, 47 mm, sealing the variable valve timing solenoid cover to the cylinder head on Ingenium engines - 2.0L AJ20P and AJ20...