for Discounts / VAT
for Discounts & Correct VAT
Land Rover Freelander parts for both generations. The L314 (1997 to 2006) and L359 (2006 to 2014) use different platforms, engines, and drivetrains. OEM, Genuine, and aftermarket components in stock. Select your generation below to find correctly fitted parts for your vehicle.
LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...
View full detailsExhaust Mounting - Rubber is a rubber isolator in the exhaust suspension system, fitted between the exhaust assembly and the vehicle underbody. Th...
View full detailsTow Slider - Adjustable Saddle Type for the Dixon Bate adjustable tow bracket system. This is the vertically sliding saddle piece in the Dixon Bat...
View full detailsRadiator tank assembly (Use Cap PCD000090/PCD500030)
Coolant Temperature Sensor in the engine cooling circuit. This sensor monitors coolant temperature and transmits a signal to the engine management...
View full detailsCigar Lighter Ring - Illuminated
Cigar Lighter Ring - Illuminated
Parking Aid Sensor for the front bumper inner position, forming part of the Parking Distance Control (PDC) system. The sensor emits ultrasonic pul...
View full detailsParking Aid Sensor - ultrasonic transducer for the Parking Distance Control (PDC) system, mounted through the bumper cover. The transducer emits a...
View full detailsFront Fog Lamp Bulb - H11 halogen capsule rated 12V 55W, operating in the exterior lighting system. The H11 uses the standardised PGJ19-2 base, wh...
View full detailsStop and Tail Bulb - 12V 21/5W twin-filament bulb. Two filaments share a single envelope: the 21W filament serves the stop lamp and the 5W filamen...
View full detailsW5W Capless Bulb - 12V 5W wedge-base bulb. The W2.1x9.5d capless base pushes straight into the lampholder, the bulb's own wire leads folded back a...
View full detailsH7 Halogen Bulb - 12V 55W headlamp bulb. H7 is a single-filament halogen capsule on a PX26d base, serving the dipped or main beam function dependi...
View full detailsH7 Halogen Bulb - Twin Pack - 12V 55W headlamp bulbs, supplied as a pair. H7 is a single-filament halogen capsule on a PX26d base, serving the dip...
View full detailsAsy Lamp
Clip for the headlamp washer system. Retains the headlamp washer jet to the bumper.
Clip for the headlamp washer system. Retains the headlamp washer jet to the bumper.
O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...
View full detailsSide Repeater Lamp - Front - Exterior Lighting assembly group, direction indicator circuit. Mounted in the front wing panel ahead of the door and ...
View full detailsTyre Pressure Sensor - component of the tyre pressure monitoring system (TPMS). Monitors tyre inflation pressure and transmits the reading by radi...
View full detailsFully synthetic engine oil, SAE 5W-30 - 1 litre container. Engine lubrication system. Formulated for applications specifying Ford WSS-M2C913-D, an...
View full detailsFully synthetic engine oil, SAE 5W-30 - 5 litre container. Engine lubrication system. Formulated for applications specifying Ford WSS-M2C913-D, an...
View full detailsFully synthetic engine oil, SAE 5W-30, ACEA C1 - 5 litre container. Engine lubrication system. ACEA C1 is a low-SAPS classification - reduced sulp...
View full detailsFully synthetic engine oil, SAE 5W-30, ACEA C1 - 1 litre container. Engine lubrication system. ACEA C1 is a low-SAPS classification - reduced sulp...
View full detailsBreather Valve for the axle case or manual transmission housing. The valve vents the housing to atmosphere, allowing internal air pressure to equa...
View full detailsFuel Filler Restrictor for diesel vehicles, fitted inside the fuel filler neck as part of the fuel tank and filler assembly. It forms a physical b...
View full detailsScrew - a general fixing screw used at several mounting points across the driveline and body, including transmission and transfer case mountings, t...
View full detailsAmber Bulb - 12V 5W wedge-base (W5W) bulb with an amber envelope, used in the exterior lighting circuit. It serves the direction indicator functio...
View full detailsO-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...
View full detailsNumber Plate Lamp - LED is the rear licence plate illumination unit within the rear lighting circuit. It sits in the rear number plate surround an...
View full detailsSeat Back Adjustment Handle - the operating handle for the front seat backrest recline mechanism, mounted on the outboard side of the seat frame. ...
View full detailsOuter Door Handle is the exterior handle for the side doors and fits both front and rear positions. This version is for vehicles equipped with the...
View full detailsDouble-DIN Radio Fascia Kit for fitting an aftermarket double-DIN head unit in place of the factory radio. The kit contains the double-DIN fascia ...
View full detailsNumber Plate Lamp - With Bulb is the rear licence plate illumination unit within the rear lighting circuit. It sits in the rear number plate surro...
View full detailsBolt - M10 x 25 mm, with washer. Underbody and chassis fixing used to secure engine splash shields, heat shields and underbody protection panels t...
View full detailsLeak Detection Pump - DMTL (Diagnostic Module Tank Leakage) unit for the fuel tank evaporative emission (EVAP) system. The module sits between the...
View full detailsAnti-Squeal Shim - Set of 4 is a set of self-adhesive noise-dampening shims for disc brake pads. Each shim is cut to shape and bonded to the steel...
View full detailsRelay is a 4-pin electromechanical switching relay used within the vehicle's electrical system. A low-current control signal energises the 12V coi...
View full detailsParking Aid Sensor - ultrasonic transducer for the Parking Distance Control (PDC) system, mounted through the rear bumper cover. Straight-bodied ty...
View full detailsPower Steering Hose O-Ring is a sealing ring in the power steering hydraulic circuit. It seals the union between a power steering hose and its mat...
View full detailsDoor Latch for the rear door, left-hand side, operating within the door lock control assembly. The latch engages the striker on the body aperture t...
View full detailsFront Door Latch - LH for the front door locking assembly, left-hand side. This latch mechanism mounts inside the front left-hand door and retains...
View full detailsRelay, a 70A 4-pin grey mini power relay. It provides high-current make-and-break switching for a heavy electrical load, letting a low-current con...
View full detailsLED Festoon Bulb for interior lamps. A double-ended festoon LED that replaces the standard filament festoon bulb in the courtesy, map and interior...
View full detailsStud
Touch-Up Paint Stick in Zambesi Silver. The stick applies a small quantity of colour-matched paint to stone chips and minor scratches, restoring t...
View full detailsTouch-Up Paint Pencil in Bonatti Grey Metallic (paint code 19K512). The pencil applies a small quantity of colour-matched paint to stone chips and...
View full detailsOil Drain Plug for the axle differential housing. Threaded into the lower drain port of the differential casing, it seals the housing in service a...
View full details1997 to 2006. K-series, KV6, L-series, and TD4 (BMW M47R) engines.
Freelander 1 parts →2006 to 2014. eD4, TD4, and SD4 diesel variants plus 3.2 petrol.
Freelander 2 parts →The Land Rover Freelander ran across two distinct generations and was discontinued in 2014. Each generation uses different platforms, engines, and drivetrains. Parts are not interchangeable between them, and fitment must be confirmed by generation, model year, and engine type before ordering.
The Freelander 1 (L314) was produced from 1997 to 2006 in 3-door and 5-door body styles. Engine options included the 1.8-litre Rover K-series petrol, the 2.5-litre KV6 V6 petrol, the early 2.0-litre Rover L-series diesel (1997 to 2000), and the 2.0-litre BMW M47R TD4 diesel (2001 to 2006). It used a monocoque structure with a viscous coupling unit and intermediate reduction drive, with no low-range transfer case. The Freelander 1 sold over 540,000 units across Europe during its nine-year production run, making it the best-selling four-wheel drive vehicle in Europe for five consecutive years after its 1997 launch.
The Freelander 2 (L359) was produced from 2006 to 2014 as a 5-door estate only. It is based on the Ford EUCD platform and shares its architecture with the Volvo XC60. Diesel engines used the 2.2-litre PSA DW12 unit in three states of tune: eD4 (150 hp, front-wheel drive from 2011), TD4 (160 hp), and SD4 (190 hp). Petrol options included the 3.2-litre Volvo B6324S5 inline six and, in later markets, a 2.0-litre Ford EcoBoost petrol. Four-wheel drive models use an active Haldex coupling system. Production ended in October 2014. The Freelander 2 was succeeded by the Discovery Sport.
Vehicle IdentificationIf you are unsure which generation you own, the quickest method is to check the vehicle's production year. Vehicles produced up to and including 2006 are Freelander 1 (L314). Vehicles produced from late 2006 onward are Freelander 2 (L359). The VIN plate is located on the door sill or the engine bay identification plate, depending on market variant, and confirms the build date and chassis designation.
For engine confirmation, the TD4 badge appears on both generations but refers to different engines. On Freelander 1 vehicles produced from 2001, the TD4 is a 2.0-litre BMW M47R unit. On Freelander 2 vehicles, the TD4 is a 2.2-litre PSA DW12 unit. These engines use different parts throughout and must not be confused.
Land Rover's official VIN model year guide can help you confirm your vehicle's model year from its VIN: Land Rover VIN model year guide.
Quality TiersBudget Parts stocks three quality tiers for Freelander components, visible in the collection filter.
Genuine parts are produced by Land Rover or JLR and carry the OEM part number alongside the Land Rover branding. They are the most accurate match to the original specification. Genuine Land Rover parts are listed across both Freelander generations where available.
OEM parts are manufactured by the same original equipment suppliers that produce components for Land Rover's assembly line, but sold without Land Rover branding. These are technically equivalent to Genuine parts for most applications and are the preferred choice for workshops sourcing at trade cost.
Aftermarket parts are produced by independent manufacturers to meet or exceed OEM specification. Quality varies by manufacturer. Budget Parts selects aftermarket lines that meet the functional requirements of the original part and are appropriate for use on Freelander 1 and Freelander 2 vehicles.
For critical drivetrain, braking, and suspension components, OEM or Genuine parts are recommended. Aftermarket parts are well-suited to consumables, service items, trim components, and fasteners.
Trade BuyersThe Freelander is a common vehicle in independent workshops across the Netherlands, Belgium, and Germany. Budget Parts supplies trade buyers and garages across the EU. If you service Freelanders regularly and require volume pricing or VAT-correct invoicing for business purchases, the wholesale portal is available via the header of this site.
Technical GuidesThese articles provide deeper technical context for Freelander owners and workshop technicians. They support diagnosis and part selection and link directly to the relevant generation parts collections.
A technical reference covering driveline, transmission, body, suspension, steering, and software issues across the Freelander 2 (L359) range. Useful for identifying which components are involved before ordering replacement parts.
Freelander 2 faults and fixes guide →A maintenance-focused guide covering the most common wear items on the Freelander 1 (L314), including driveshaft assemblies, engine gaskets, and cooling components. Relevant for owners keeping older L314 vehicles in service.
Freelander 1 maintenance guide →Covers driveline fault diagnosis across multiple Land Rover models including the Freelander 2. Relevant to the VCU and IRD system on Freelander 1 vehicles and the Haldex coupling drivetrain on Freelander 2 models.
Land Rover driveshaft and driveline diagnosis →Driveshafts, propshafts, universal joints, and related driveline components for both Freelander generations.
Driveshaft and propshaft parts →Cooling system components including water pumps, thermostats, and hoses. K-series and TD4 cooling parts are common service items on the L314.
Land Rover cooling parts →Engine components for K-series, KV6, L-series, M47R, DW12, and B6324S5 power units across both Freelander generations.
Land Rover engine parts →Brake discs, pads, callipers, and hydraulic components. Use the collection filter to narrow to your Freelander generation.
Land Rover brake parts →Shock absorbers, springs, bushings, and arms. Freelander 1 and Freelander 2 use different suspension architectures, so confirm generation before ordering.
Land Rover suspension parts →Combined service kits and consumables for routine Freelander maintenance. Listed under service kits when available for your engine variant.
Land Rover service kits →No. The Freelander 1 (L314, 1997 to 2006) and Freelander 2 (L359, 2006 to 2014) use different platforms, engines, drivetrains, and electrical architectures. A Freelander 1 TD4 uses a 2.0-litre BMW M47R engine. A Freelander 2 TD4 uses a 2.2-litre PSA DW12 engine. Parts designed for one generation will not fit the other. Always confirm your generation, model year, and engine type before ordering.
The most reliable check is the production year. Freelander 1 (L314) vehicles were produced from October 1997 to 2006 and were sold in 3-door and 5-door body styles. Note that vehicles produced in late 1997 typically carry a 1998 model year designation. Freelander 2 (L359) vehicles were produced from late 2006 to October 2014 as 5-door estates only. If your vehicle was registered in late 2006 or early 2007, check the build date on the VIN plate, located on the door sill or in the engine bay. The chassis code L314 confirms a Freelander 1. The chassis code L359 confirms a Freelander 2.
Genuine parts carry Land Rover branding and are produced to OEM specification by JLR-approved suppliers. OEM parts are manufactured by the same original equipment suppliers but sold without Land Rover branding, making them a cost-effective equivalent for most applications. Aftermarket parts are produced by independent manufacturers and vary in quality. For braking, drivetrain, and suspension components, OEM or Genuine parts are recommended. For service items, consumables, and trim, quality aftermarket parts are a practical choice.
Yes. Budget Parts is based in The Hague and holds Freelander parts in EU stock. Orders are fulfilled for customers and workshops across the Netherlands, Belgium, Germany, France, and other EU member states. Fitment support and VIN-based part confirmation are available for both Freelander generations.
The Freelander 2 was discontinued in October 2014 and replaced by the Discovery Sport in 2015. The Freelander name was not used on any Land Rover vehicle after that date. A separate Freelander-branded electric vehicle is being developed under a JLR and Chery joint venture for the Chinese market, but this is an entirely different product with no parts commonality with the L314 or L359. Budget Parts supplies parts for the original Freelander 1 (L314) and Freelander 2 (L359) only.