for Discounts / VAT
for Discounts & Correct VAT
Land Rover Freelander parts for both generations. The L314 (1997 to 2006) and L359 (2006 to 2014) use different platforms, engines, and drivetrains. OEM, Genuine, and aftermarket components in stock. Select your generation below to find correctly fitted parts for your vehicle.
Differential Pinion Oil Seal with a double sealing lip, for the front and rear differentials. It is press-fitted into the differential housing aro...
View full detailsFlanged Nyloc Nut, M10, a multi-purpose locking fastener used across the chassis and suspension. The nylon insert resists loosening under vibratio...
View full detailsFlange Bolt, M12 - a hexagon-head bolt with an integral flange beneath the head. The flange spreads the clamping load over a wider bearing area an...
View full detailsFlanged Head Screw is an M6 x 12mm machine screw with an integral flange beneath the head. The flange spreads clamping load over a wider area and ...
View full detailsNyloc Nut with an M8 thread - a nylon-insert locking nut used as a self-locking fastener in threaded assemblies. A nylon collar set into the top o...
View full detailsLocking Nut - an M12 self-locking nut used to secure suspension linkage fasteners. The locking feature resists loosening under the vibration and c...
View full detailsHex Nut - M14 for use in Land Rover suspension and general fastener applications. A metric M14 standard hexagonal nut for use in axle, suspension,...
View full detailsDifferential Flange Mud Shield - a protective shield fitted at the differential pinion drive flange. It sits behind the drive flange, where the pr...
View full detailsDiff oil seal
Bolt - a hexagonal-head bolt with an M10 metric thread and a 30 mm length. A common general-purpose fastener used at fixing points across the suspe...
View full detailsFront Differential Oil Seal - a rotary shaft seal fitted to the front differential to retain gear oil and exclude dirt and water where the drive sh...
View full detailsRear Hub Wheel Bearing for the rear hub assembly. It supports the rear wheel hub on the stub axle, allowing the wheel to rotate freely while carryi...
View full detailsWasher - a plain flat washer used as a general-purpose fastening component across many assemblies on the vehicle. Fitted under a bolt head or nut,...
View full detailsWheel Stud for the front and rear axle hubs on the Freelander 1. This stud is pressed into the hub flange and provides the threaded fixing point f...
View full detailsRear Suspension Arm forming part of the rear multi-link suspension. It links the rear subframe to the wheel knuckle, locating the wheel and contro...
View full detailsBolt securing the front suspension lower control arm at its rear fixing point. M14 x 90mm, Torx drive head.
Suspension Arm Nut - M16 flanged nut used on the rear suspension. It secures the lateral and lower arm pivot bolts where they pass through the sus...
View full detailsBolt securing a rear suspension arm to the rear knuckle. M14 x 75mm with a Torx head.
M14 x 105mm Bolt is a suspension and steering mounting fastener. It secures the rear suspension arm to the bearing hub, and is also used to mount ...
View full detailsRear Suspension Crosslink is a lateral locating link within the rear multi-link suspension assembly. It connects the rear subframe to the wheel kn...
View full detailsBolt propshaft
Shock Absorber for the right-hand side of the rear suspension. The shock absorber (damper) controls movement of the rear suspension, damping road-...
View full detailsCV Boot Kit - Inner
Shock Absorber Boot for the suspension damper assembly. The boot sheaths the exposed damper piston rod, shielding it from grit, moisture and road ...
View full detailsAnti-Roll Bar Mounting Bush is the front stabiliser-bar bush that clamps the anti-roll bar into its chassis mounting bracket. It locates the bar l...
View full detailsRear Shock Absorber for the right-hand side of the rear suspension. It damps spring oscillation at the rear axle, controlling body and wheel moveme...
View full detailsMounting Bush - rear pivot bush for the front lower suspension arm LR007206, the opposite side to LR007205, supplied in heavy-duty specification. ...
View full detailsMounting Bush - front pivot bush for the front lower suspension arms LR007205 and LR007206. It forms the forward mounting of the arm to the subfra...
View full detailsMounting Bush - rear pivot bush for the front lower suspension arm LR007205, supplied in heavy-duty specification. It forms the rearward mounting ...
View full detailsBolt for the front suspension, used at the suspension arm, front cross member and stabilizer bar fixings. M14 x 85mm.
Shock Absorber Bracket in the rear suspension. It locates and secures the rear shock absorber, providing the mounting point that ties the damper t...
View full detailsFront Suspension Strut Top Bearing sits at the top of the front suspension strut, between the upper spring seat and the strut mounting. It lets th...
View full detailsLower Suspension Arm Bush - Front - Small Rubber-to-metal bonded bush for the front lower suspension arm, part of the front independent suspension ...
View full detailsLower Suspension Arm Bush - Front - Large Rubber-to-metal bonded bush for the front lower suspension arm, part of the front independent suspension ...
View full detailsFront Road Spring for the front suspension. Two are fitted per vehicle, one at each front corner. The coil spring carries the front of the vehicle...
View full detailsFront Lower Suspension Arm - Left-Hand Side The lower suspension arm is part of the front independent suspension assembly. It pivots on its inboar...
View full detailsFront Lower Suspension Arm - Right-Hand Side The lower suspension arm is part of the front independent suspension assembly. It pivots on its inboa...
View full detailsRear Shock Absorber for the rear suspension. It damps spring oscillation at the rear axle, controlling body and wheel movement to keep the tyre in ...
View full detailsRide-Height Sensor - a suspension-mounted level sensor for the automatic headlamp levelling system. It measures ride height at the axle and report...
View full detailsShock Absorber - Front - LH
Shock Absorber - Front - LH - hydraulic damper forming the damper element of the front strut assembly, left-hand side. The unit controls the rate ...
View full detailsPolyurethane Bush Kit for the rear mounting position of the front lower wishbone, replacing the original rubber bush in the front suspension arm as...
View full detailsFront Shock Absorber - Left-Hand - part of the front suspension damping assembly. The damper controls vertical movement at the left front corner, ...
View full detailsDriveshaft Oil Seal - Inner - Front LH is fitted to the front axle case (final drive housing) and seals around the inner end of the left-hand front...
View full detailsDriveshaft Oil Seal - Inner - Front RH is fitted to the front axle case (final drive housing) and seals around the inner end of the right-hand fron...
View full detailsSeal - Haldex Coupling - Rear Axle
Oil Seal - Differential Flange - Front seals the front differential where the drive flange exits the axle case. It runs against the differential o...
View full detailsAnti-Roll Bar Link - Rear (Heavy Duty) connects the rear anti-roll (stabiliser) bar to the suspension, within the rear cross member and stabiliser ...
View full details1997 to 2006. K-series, KV6, L-series, and TD4 (BMW M47R) engines.
Freelander 1 parts →2006 to 2014. eD4, TD4, and SD4 diesel variants plus 3.2 petrol.
Freelander 2 parts →The Land Rover Freelander ran across two distinct generations and was discontinued in 2014. Each generation uses different platforms, engines, and drivetrains. Parts are not interchangeable between them, and fitment must be confirmed by generation, model year, and engine type before ordering.
The Freelander 1 (L314) was produced from 1997 to 2006 in 3-door and 5-door body styles. Engine options included the 1.8-litre Rover K-series petrol, the 2.5-litre KV6 V6 petrol, the early 2.0-litre Rover L-series diesel (1997 to 2000), and the 2.0-litre BMW M47R TD4 diesel (2001 to 2006). It used a monocoque structure with a viscous coupling unit and intermediate reduction drive, with no low-range transfer case. The Freelander 1 sold over 540,000 units across Europe during its nine-year production run, making it the best-selling four-wheel drive vehicle in Europe for five consecutive years after its 1997 launch.
The Freelander 2 (L359) was produced from 2006 to 2014 as a 5-door estate only. It is based on the Ford EUCD platform and shares its architecture with the Volvo XC60. Diesel engines used the 2.2-litre PSA DW12 unit in three states of tune: eD4 (150 hp, front-wheel drive from 2011), TD4 (160 hp), and SD4 (190 hp). Petrol options included the 3.2-litre Volvo B6324S5 inline six and, in later markets, a 2.0-litre Ford EcoBoost petrol. Four-wheel drive models use an active Haldex coupling system. Production ended in October 2014. The Freelander 2 was succeeded by the Discovery Sport.
Vehicle IdentificationIf you are unsure which generation you own, the quickest method is to check the vehicle's production year. Vehicles produced up to and including 2006 are Freelander 1 (L314). Vehicles produced from late 2006 onward are Freelander 2 (L359). The VIN plate is located on the door sill or the engine bay identification plate, depending on market variant, and confirms the build date and chassis designation.
For engine confirmation, the TD4 badge appears on both generations but refers to different engines. On Freelander 1 vehicles produced from 2001, the TD4 is a 2.0-litre BMW M47R unit. On Freelander 2 vehicles, the TD4 is a 2.2-litre PSA DW12 unit. These engines use different parts throughout and must not be confused.
Land Rover's official VIN model year guide can help you confirm your vehicle's model year from its VIN: Land Rover VIN model year guide.
Quality TiersBudget Parts stocks three quality tiers for Freelander components, visible in the collection filter.
Genuine parts are produced by Land Rover or JLR and carry the OEM part number alongside the Land Rover branding. They are the most accurate match to the original specification. Genuine Land Rover parts are listed across both Freelander generations where available.
OEM parts are manufactured by the same original equipment suppliers that produce components for Land Rover's assembly line, but sold without Land Rover branding. These are technically equivalent to Genuine parts for most applications and are the preferred choice for workshops sourcing at trade cost.
Aftermarket parts are produced by independent manufacturers to meet or exceed OEM specification. Quality varies by manufacturer. Budget Parts selects aftermarket lines that meet the functional requirements of the original part and are appropriate for use on Freelander 1 and Freelander 2 vehicles.
For critical drivetrain, braking, and suspension components, OEM or Genuine parts are recommended. Aftermarket parts are well-suited to consumables, service items, trim components, and fasteners.
Trade BuyersThe Freelander is a common vehicle in independent workshops across the Netherlands, Belgium, and Germany. Budget Parts supplies trade buyers and garages across the EU. If you service Freelanders regularly and require volume pricing or VAT-correct invoicing for business purchases, the wholesale portal is available via the header of this site.
Technical GuidesThese articles provide deeper technical context for Freelander owners and workshop technicians. They support diagnosis and part selection and link directly to the relevant generation parts collections.
A technical reference covering driveline, transmission, body, suspension, steering, and software issues across the Freelander 2 (L359) range. Useful for identifying which components are involved before ordering replacement parts.
Freelander 2 faults and fixes guide →A maintenance-focused guide covering the most common wear items on the Freelander 1 (L314), including driveshaft assemblies, engine gaskets, and cooling components. Relevant for owners keeping older L314 vehicles in service.
Freelander 1 maintenance guide →Covers driveline fault diagnosis across multiple Land Rover models including the Freelander 2. Relevant to the VCU and IRD system on Freelander 1 vehicles and the Haldex coupling drivetrain on Freelander 2 models.
Land Rover driveshaft and driveline diagnosis →Driveshafts, propshafts, universal joints, and related driveline components for both Freelander generations.
Driveshaft and propshaft parts →Cooling system components including water pumps, thermostats, and hoses. K-series and TD4 cooling parts are common service items on the L314.
Land Rover cooling parts →Engine components for K-series, KV6, L-series, M47R, DW12, and B6324S5 power units across both Freelander generations.
Land Rover engine parts →Brake discs, pads, callipers, and hydraulic components. Use the collection filter to narrow to your Freelander generation.
Land Rover brake parts →Shock absorbers, springs, bushings, and arms. Freelander 1 and Freelander 2 use different suspension architectures, so confirm generation before ordering.
Land Rover suspension parts →Combined service kits and consumables for routine Freelander maintenance. Listed under service kits when available for your engine variant.
Land Rover service kits →No. The Freelander 1 (L314, 1997 to 2006) and Freelander 2 (L359, 2006 to 2014) use different platforms, engines, drivetrains, and electrical architectures. A Freelander 1 TD4 uses a 2.0-litre BMW M47R engine. A Freelander 2 TD4 uses a 2.2-litre PSA DW12 engine. Parts designed for one generation will not fit the other. Always confirm your generation, model year, and engine type before ordering.
The most reliable check is the production year. Freelander 1 (L314) vehicles were produced from October 1997 to 2006 and were sold in 3-door and 5-door body styles. Note that vehicles produced in late 1997 typically carry a 1998 model year designation. Freelander 2 (L359) vehicles were produced from late 2006 to October 2014 as 5-door estates only. If your vehicle was registered in late 2006 or early 2007, check the build date on the VIN plate, located on the door sill or in the engine bay. The chassis code L314 confirms a Freelander 1. The chassis code L359 confirms a Freelander 2.
Genuine parts carry Land Rover branding and are produced to OEM specification by JLR-approved suppliers. OEM parts are manufactured by the same original equipment suppliers but sold without Land Rover branding, making them a cost-effective equivalent for most applications. Aftermarket parts are produced by independent manufacturers and vary in quality. For braking, drivetrain, and suspension components, OEM or Genuine parts are recommended. For service items, consumables, and trim, quality aftermarket parts are a practical choice.
Yes. Budget Parts is based in The Hague and holds Freelander parts in EU stock. Orders are fulfilled for customers and workshops across the Netherlands, Belgium, Germany, France, and other EU member states. Fitment support and VIN-based part confirmation are available for both Freelander generations.
The Freelander 2 was discontinued in October 2014 and replaced by the Discovery Sport in 2015. The Freelander name was not used on any Land Rover vehicle after that date. A separate Freelander-branded electric vehicle is being developed under a JLR and Chery joint venture for the Chinese market, but this is an entirely different product with no parts commonality with the L314 or L359. Budget Parts supplies parts for the original Freelander 1 (L314) and Freelander 2 (L359) only.