Land Rover Fuel System Parts

Sealing Washer for the fuel injector, part of the diesel fuel injection system. The washer seats between the base of the injector and its bore in ...

Throttle Housing Seal for the 2.7L TDV6 and 3.0L SDV6 diesel engines, sealing the throttle body to the air intake. The seal sits between the throt...

Throttle Body Housing Seal seals the rear interface of the throttle body housing where it mates with the adjoining intake ducting, within the engin...

Fuel Filter Head is the housing top of the fuel filter assembly within the diesel fuel supply system, onto which the filter element mounts. The he...

Fuel Filter Element for the diesel fuel supply system. The element removes particulate contamination and separates water from the fuel before it re...

Fuel Filter Element for the diesel fuel supply system. The element removes particulate contamination and separates water from the fuel before it re...

Fuel Leak Off O-Ring seals the leak-off (spill return) connection at a diesel fuel injector. It sits in the injector leak-off circuit that collect...

Fuel Tank Strap for Discovery 3, Discovery 4, and Range Rover Sport equipped with the 10MY-specification fuel tank (two vent pipes). This strap se...

Fuel Filter within the diesel fuel supply assembly. This filter traps particulate contamination in the fuel supply circuit before fuel reaches the...

Throttle Body Housing Seal seals the rear interface of the throttle body housing where it mates with the adjoining intake ducting, within the engin...

Throttle Seal for the intake throttle valve housing. It fits at the joint between the throttle body and the intake, maintaining an airtight connec...

Fuel Leak-Off Tube Kit - TDV6

Filter Assy - Fuel - TDV6 OEM DELPHI

Fuel Tank Sender Unit for the rear fuel tank. This sender unit mounts directly in the rear fuel tank and measures fuel level via a float and resis...

Fuel Tank Sender Unit - Front for the Discovery 3 (2005-2009), providing the float and resistor assembly that measures fuel level and transmits rea...

Fuel Pressure Sensor for the 2.7 Td6 common-rail diesel fuel system. The sensor is mounted on the fuel rail and monitors fuel pressure within the h...

Fuel Injector Seal - Upper - sealing ring for the upper position on the fuel injector, part of the fuel injectors and pipes group on the V8 petrol ...

Fuel Injector Seal - Lower is the lower sealing ring fitted to the fuel injector, within the fuel injector and pipe assembly of the 4.4L V8 (AJ) pe...

Fuel Injector Seal - Lower is the lower sealing ring fitted to the fuel injector, within the fuel injector and pipe assembly of the 4.4L V8 (AJ) pe...

Fuel Injection Pump Bolt secures the high-pressure fuel injection pump to its mounting on the engine. It provides the clamping load that holds the...

Panel Air Filter - a washable, reusable panel air filter that fits into the standard air filter housing in place of the original element, filtering...

Leak Detection Pump - DMTL (Diagnostic Module Tank Leakage) unit for the fuel tank evaporative emission (EVAP) system. The module sits between the...

Injector Retaining Bolt - M6 x 35 mm clamp bolt in the fuel injection system of the V6 and V8 diesel engines. The bolt secures the injector hold-d...

Module

Fuel Injector Supply Tube - supply tube in the fuel delivery circuit of the 4.4 AJ-V8 petrol engine. The tube carries pressurised fuel from the fe...

Fuel Injector Supply Tube - supply tube in the fuel delivery circuit of the 4.4 AJ-V8 petrol engine. The tube carries pressurised fuel from the fe...

Kit ""O"" ring GENUINE LR

Fuel Rail for the 2.7 Td6 common-rail diesel fuel system. The fuel rail is a high-pressure manifold that receives fuel from the high-pressure pump ...

Fuel Sender Cover - the tank-top closure over the fuel sender aperture, incorporating the in-tank fuel filter, part of the fuel tank sender and mou...

Cooler Assembly - Fuel No Gasket

Fuel Pump Module is the in-tank unit that draws fuel from the tank and delivers it under pressure to the engine fuel rail. The module carries the ...

Fuel Hose for the throttle housing on the 4.4L V8 petrol (AJ V8 EFI) engine. This moulded hose is routed at the throttle housing within the engine...

Oil filter housing assembly for the 2.7 V6 turbo diesel, incorporating the engine oil cooler and the fuel cooler in a single casting. The housing ...

Fuel Filler Restrictor for diesel vehicles, fitted inside the fuel filler neck as part of the fuel tank and filler assembly. It forms a physical b...

Fuel Injection Pump Assembly for the 2.7L V6 TDV6 (Lion) diesel engine, forming the high-pressure stage of the common-rail fuel injection system. ...

Fuel Injector for the common-rail diesel fuel system. The injector delivers atomised, high-pressure fuel into the cylinder under electronic contro...

Fuel Injector for the 4.0L V6 petrol engine. An electronically actuated port injector that meters and atomises fuel into the intake tract under en...

Fuel Pump and Sender Assembly - the in-tank fuel delivery module for petrol applications. It combines the electric fuel pump, the in-tank strainer ...

Fuel Filter Element for the 2.7L TDV6 diesel engine, fitted in the fuel supply circuit ahead of the high-pressure injection pump. The element remo...

Hose - Engine Fuel System - Discovery 3 RS1

Fuel Injector for the common-rail diesel fuel system. The injector delivers atomised, high-pressure fuel into the cylinder under electronic contro...

Fuel Flap Spring - the return spring for the external fuel filler flap. Fitted within the fuel filler flap mechanism, it biases the flap open when...

Fuel Flap Latch - the spring-loaded latch and retainer for the external fuel filler flap. Mounted within the fuel filler recess, it holds the flap...

Fuel Injector for the 4.4L AJV8 petrol engine, forming part of the electronic sequential fuel injection system. The injector meters and atomises p...