Land Rover Fuel System Parts

Compression Olive for rigid fuel pipe unions. This 8 mm ferrule seats between the union nut and the fitting body, compressing onto the pipe as the ...

Fuel Tank Locking Ring for the fuel pump and sender unit assembly. This ring secures the fuel pump and sender unit in the top of the fuel tank, pr...

screw M5 x 12

Fuel Pipe Clip securing fuel pipe within the fuel delivery system. The clip retains and locates the fuel line along its routing, holding it agains...

Throttle body heater assembly OEM

Inline Fuel Filter for petrol fuel-injection (EFI) systems, fitted in the pressurised fuel supply line between the fuel pump and the injector rail....

Copper Sealing Washer used to seal a threaded or banjo joint in the fuel and lubrication circuits. The soft copper deforms under tightening to con...

Washer used at multiple points within the manual gearbox assembly, including the main casing, extension housing, oil pump and speedometer drive hou...

Fuel Filler Cap that seals the fuel tank filler neck. Non-locking type with a black finish, closing the filler neck against fuel vapour loss and t...

Sealing Washer for the fuel injector, part of the diesel fuel injection system. The washer seats between the base of the injector and its bore in ...

Fuel Pipe Union Nut for the fuel delivery line. This female threaded nut draws a fuel pipe up to its mating union, clamping the pipe's flared or c...

Bolt M8 X 16 HTSETS 8.8 S/COL sold EACH

Throttle Body Gasket seals the throttle body to the plenum chamber on the 4.0L and 4.6L V8 EFI petrol engine. Fitted between the throttle body and...

Fuel Pressure Regulator mounts on the fuel rail of the multiport electronic fuel injection (EFI) system. It holds a constant pressure difference b...

Fuel Pump Seal for the fuel tank sender unit. This seal seats at the mounting flange of the fuel pump and sender unit where it interfaces with the ...

In-Tank Fuel Pump & Sender Unit for Range Rover P38A petrol applications. This combined assembly houses the electric fuel pump and fuel level s...

Fuel Injector for the EFI V8 petrol engine, part of the multi-point electronic fuel injection system. The injector is an electrically-operated sol...

Fuel Filter for the diesel fuel supply system — the cartridge that cleans fuel on its way to the injection pump. The filter traps particulate cont...

Fuel Temperature Sensor for the EFI V8 petrol engine, part of the electronic fuel injection management system. The sensor measures the temperature...

Inline Fuel Filter for petrol fuel-injection (EFI) systems, fitted in the pressurised fuel supply line between the fuel pump and the injector rail....

O-Ring sealing the air filter housing to the airflow meter on V8 EFI engines. This O-ring seals the joint between the air filter housing outlet an...

Injection Pump - diesel fuel injection pump for the 2.5L six-cylinder BMW diesel engine, supplied as a reconditioned unit. Driven by the engine, i...

Injector O-Ring - a sealing ring for the fuel injectors in the electronic fuel injection system. It seals the injector where it locates in its bore...

Injector Clip for V8 EFI fuel injection systems, used in the fuel delivery assembly at the intake manifold. This retaining clip secures the fuel i...

Fuel pressure regulator BMW Diesel OEM BOSCH

HOSE-FILLER FUEL P38

Fuel Feed Hose for the fuel supply circuit. This flexible hose carries fuel within the fuel delivery or evaporative emission system. On diesel app...

Fuel Filler Cap

Fuel Filter Assembly within the diesel fuel supply circuit, removing contaminants from the fuel before it reaches the injection system. Installed ...

Fuel Tank Lock Ring secures the in-tank fuel pump and sender assembly to the top of the fuel tank. The ring locks down over the tank aperture, hold...

Fuel Injector and Sensor Assembly for the 2.5L six-cylinder M51 turbo diesel, part of the diesel fuel injection circuit. The assembly is supplied ...

Fuel Pipe Union Nut for the fuel delivery line. This female threaded nut draws a fuel pipe up to its mating union, clamping the pipe's flared or c...

Fuel Injector for the EFI V8 petrol engine, part of the multi-point electronic fuel injection system. The injector is an electrically-operated sol...

Fuel Pump and Sender Unit mounted inside the fuel tank of the 2.5L diesel engine. It houses the in-tank fuel lift pump that delivers fuel to the e...

Fuel Tank Locking Ring for the fuel pump and sender unit assembly. This ring secures the fuel pump and sender unit in the top of the fuel tank, pr...

Fuel Filter for the diesel fuel supply system — the cartridge that cleans fuel on its way to the injection pump. The filter traps particulate cont...

Fuel Filter for the diesel fuel supply system — the cartridge that cleans fuel on its way to the injection pump. The filter traps particulate cont...

Regulator - Fuel Pressure

joint washer, various applications, mostly BMW engines. L322 - Oil Pan/Oil Level Indicator M62 B44 4.4 V8 Petrol L322 - Oil Pan/Oil Level Indicato...

Injector O-Ring is a sealing ring fitted to a fuel injector in the V8 EFI (electronic fuel injection) system. It seals the injector against its mo...

Injector O-Ring (Large) - the larger of the two sealing O-rings fitted to each fuel injector, sealing the injector into the fuel rail. Fitted to t...

Fuel Filler Cap seals the fuel tank filler neck within the fuel storage system. It closes the filler neck to retain fuel vapour, maintain the corr...

Fuel Tank Inspection Plate Seal is a rubber sealing gasket for the fuel tank inspection plate in the fuel tank assembly. The inspection plate prov...