Land Rover Fuel System Parts

screw M5 x 12

Fuel Filter for the diesel fuel supply system of the 2.2L DW12 common-rail direct-injection turbo diesel engine. It is fitted in the fuel line betw...

Fuel Filter for the diesel fuel supply system of the 2.2L DW12 common-rail direct-injection turbo diesel engine. It is fitted in the fuel line betw...

Fuel return tube O-ring seal

pad foam OEM, eneregy absorbing. (Bij filter LR111341)

Fuel Tank Heat Shield is the underbody heat barrier fitted between the exhaust system and the fuel tank. It reflects and insulates against radiant...

Fuel Injector Sealing Washer for the fuel injection system. Seals the fuel injector against the cylinder head, maintaining the combustion seal and...

O-Ring for the high-pressure diesel fuel injection pump. The ring seals the joint between the pump body and its mounting face on the engine, preve...

Fuel Injector Sealing Washer for the fuel injection system. Seals the fuel injector against the cylinder head, maintaining the combustion seal and...

Sealing Washer is the fuel injector sealing washer for the Ingenium diesel engine (2.0L and 3.0L AJ20 / AJ21 diesel). It seats at the base of the ...

Energy-Absorbing Foam Pad is fitted within the fuel filter assembly, cushioning the filter and absorbing vibration and impact energy. Supplied for...

Bolt securing the fuel injector and high-pressure fuel pipe assembly on the engine fuel system. It clamps the injector and high-pressure pipe unio...

Bolt securing the fuel injector and high-pressure fuel pipe assembly on the engine fuel system. It clamps the injector and high-pressure pipe unio...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

Fuel Pressure Sensor mounted in the fuel supply manifold (common rail). The sensor measures the pressure of fuel in the rail and reports it to the...

Fuel Pressure Regulator fitted to the high-pressure diesel injection pump. The regulator controls the pressure of fuel delivered by the injection ...

Fuel Pressure Sensor for the high-pressure fuel injection circuit on petrol engines. It measures fuel rail pressure and temperature and reports to ...

Fuel Hose forms the fuel filter section of the fuel delivery circuit. It routes fuel through the filter housing, connecting the filter into the su...

Injector Retainer - injector clamp for the 2.2L Td4 common-rail diesel engine. The retainer clamps the fuel injector into its bore in the cylinder...

Leak Detection Pump - DMTL (Diagnostic Module Tank Leakage) unit for the fuel tank evaporative emission (EVAP) system. The module sits between the...

Throttle Body and Motor regulates the volume of air entering the intake manifold on the 2.0L Si4 16V TIVCT turbocharged petrol engine. It sits in t...

High-Pressure Fuel Injection Pump for the 2.0L GTDi turbocharged petrol engine. This engine-mounted pump raises fuel to the high pressure required ...

Fuel Pump and Sender Unit is the in-tank fuel delivery module for the 2.2L diesel. It draws fuel from the tank to feed the engine and incorporates...

Fuel Injector for the 2.0L AJ200 (Ingenium) four-cylinder diesel engine. The injector delivers a metered, high-pressure spray of diesel into the c...

Fuel Pressure and Temperature Sensor for petrol fuel-injection systems. The combined sensor measures fuel rail pressure and fuel temperature and r...

Fuel Injector for the 2.0L I4 Ingenium (AJ200) diesel engine, part of the high-pressure common rail fuel injection system. The injector is clamped...

Fuel Pump Drive Sprocket for the 2.0L Ingenium diesel engine (AJ200 / AJ20D4). The sprocket drives the high-pressure fuel pump from the engine's ti...

Fuel Pressure Regulator (fuel pressure control valve) for the diesel high-pressure fuel injection system. Mounted on the high-pressure fuel pump, i...

Fuel Supply and Vapour Tube is a combined under-floor pipe assembly serving the fuel delivery and evaporative emissions systems. The supply line c...

High-Pressure Fuel Injection Pump for the 2.0L GTDi turbocharged petrol engine. This engine-mounted pump raises fuel to the high pressure required ...

Fuel Injector for the 2.2L Td4 common-rail diesel fuel injection system. The injector meters and atomises high-pressure diesel into the combustion ...

Strap - Fuel Tank

Injector Refit Kit supplying the seals needed to refit a fuel injector on petrol engines. It restores the sealing interface between the injector an...