Land Rover Fuel System Parts

Air filter element Puma TD4 Def.

Injector Bolt secures the fuel injector clamp within the cylinder head on the 2.7 and 3.0 V6 diesel engines. The M6 x 35 mm bolt retains the clamp...

Fuel filter element used within the diesel fuel system to remove particulate contamination and water from fuel prior to delivery to the high-pressu...

Air cleaner element installed in the air cleaner housing of the engine intake system, where it filters incoming air before it enters the intake duc...

Suitable for Fitment All diesel models from (VIN) 7A000001 on

Sealing Washer for the fuel injector, part of the diesel fuel injection system. The washer seats between the base of the injector and its bore in ...

Throttle Housing Seal for the 2.7L TDV6 and 3.0L SDV6 diesel engines, sealing the throttle body to the air intake. The seal sits between the throt...

Throttle Body Housing Seal seals the rear interface of the throttle body housing where it mates with the adjoining intake ducting, within the engin...

Injector O-Ring is the lower sealing ring for a diesel fuel injector, used on 3.0L SDV6 and 4.4L TDV8 engines. It seals the lower body of the inje...

Fuel Filter Head is the housing top of the fuel filter assembly within the diesel fuel supply system, onto which the filter element mounts. The he...

Fuel Filter Element for the diesel fuel supply system. The element removes particulate contamination and separates water from the fuel before it re...

Fuel Filter Element for the diesel fuel supply system. The element removes particulate contamination and separates water from the fuel before it re...

Fuel Leak Off O-Ring seals the leak-off (spill return) connection at a diesel fuel injector. It sits in the injector leak-off circuit that collect...

Fuel return tube O-ring seal

Fuel Tank Strap for Discovery 3, Discovery 4, and Range Rover Sport equipped with the 10MY-specification fuel tank (two vent pipes). This strap se...

Fuel Injector Sealing Washer - seals the fuel injector where it seats in the cylinder head. Fitted at the base of the injector, it forms the combu...

MAP Sensor (Manifold Absolute Pressure sensor) for the engine management system, mounted on the throttle housing. It measures the absolute pressur...

Fuel Injector Sealing Washer - seals the fuel injector where it seats in the cylinder head. Fitted at the base of the injector, it forms the combu...

Fuel Filter within the diesel fuel supply assembly. This filter traps particulate contamination in the fuel supply circuit before fuel reaches the...

Kit for the fuel injection pump drive system within the engine front timing drive assembly. It operates as part of the auxiliary timing arrangeme...

Throttle Body Housing Seal seals the rear interface of the throttle body housing where it mates with the adjoining intake ducting, within the engin...

Throttle Seal for the intake throttle valve housing. It fits at the joint between the throttle body and the intake, maintaining an airtight connec...

Fuel Filter TD4

Fuel Leak-Off Tube Kit - TDV6

Fuel Filter - Freelander TD4

Fuel pressure regulator BMW Diesel OEM BOSCH

Fuel Pressure Sensor for the 2.7 Td6 common-rail diesel fuel system. The sensor is mounted on the fuel rail and monitors fuel pressure within the h...

Throttle Housing Gasket - seals the throttle body to the intake manifold. Forms the air-tight joint between the electronic throttle housing and th...

Fuel Injector Refit Kit - the seals and retainer required when removing and refitting a fuel injector on 3.0L V6 and 5.0L V8 supercharged petrol en...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

Fuel Pressure Sensor for the high-pressure fuel injection circuit on petrol engines. It measures fuel rail pressure and temperature and reports to ...

Fuel Injection Pump Bolt secures the high-pressure fuel injection pump to its mounting on the engine. It provides the clamping load that holds the...

Panel Air Filter - a washable, reusable panel air filter that fits into the standard air filter housing in place of the original element, filtering...

Leak Detection Pump - DMTL (Diagnostic Module Tank Leakage) unit for the fuel tank evaporative emission (EVAP) system. The module sits between the...

Dust Cover - Fuel Filler is a protective cover fitted at the fuel tank filler neck. It locates behind the fuel filler flap and shields the filler ...

Manifold Absolute Pressure (MAP) Sensor for the 3.0L V6 diesel engine. Mounted on the throttle housing, it measures the absolute pressure in the i...

Fuel Supply Manifold distributes fuel to the injectors on the left-hand cylinder bank of the 3.0L V6 diesel engine. It forms part of the engine's ...

Throttle Body and Motor for the 3.0L V6 diesel engine, mounted in the air intake tract with its electric actuator motor integrated. In this diesel...

Fuel Supply Manifold - right-hand cylinder bank component of the high-pressure common-rail fuel injection assembly on the 3.0L V6 turbo diesel (30D...

Fuel Pump - high-pressure, engine-mounted fuel injection pump within the direct-injection fuel system on petrol engines. Driven off the engine, it...

Fuel Pump - high-pressure, engine-mounted fuel injection pump within the direct-injection fuel system on petrol engines. Driven off the engine, it...