for Discounts / VAT
for Discounts & Correct VAT
Parts for the Range Rover Evoque L538, covering all variants from 2011 to 2019 including the 5-door, 3-door, and convertible. Covers pre-facelift and post-facelift specifications. Stock is held in the Netherlands and dispatched across the EU. Use the filters to narrow by model year, category, or quality grade.
Alternator Assembly - the belt-driven charging unit that supplies the vehicle's electrical system and recharges the battery while the engine runs. ...
View full detailsAlternator Assembly - the belt-driven charging unit that supplies the vehicle's electrical system and recharges the battery while the engine runs. ...
View full detailsFuel Injector for the 2.2L Td4 common-rail diesel fuel injection system. The injector meters and atomises high-pressure diesel into the combustion ...
View full detailsA/C Evaporator for the air conditioning circuit, mounted within the heating and ventilation (HVAC) housing. The evaporator is the heat exchanger i...
View full detailsInlet Manifold distributes charge air from the intake system to the cylinder head inlet ports. Fitted to the 2.2L Td4 (DW12) diesel engine, it rou...
View full detailsFlywheel for the 2.2L 16V common-rail turbo-diesel engine (DW12). It bolts to the rear flange of the crankshaft and carries the starter ring gear ...
View full detailsFuel Injection Pump Reman
Evaporator for the front air-conditioning system, housed within the HVAC unit behind the dashboard. Low-pressure liquid refrigerant expands as it ...
View full detailsTurbocharger Actuator for the 2.2L diesel engine's forced-induction system. It adjusts the turbocharger's variable-geometry mechanism to regulate b...
View full detailsTurbocharger Assembly for the 2.2L diesel engine, part of the forced-induction system. Exhaust gas drives the turbine, which spins a compressor whe...
View full detailsTurbocharger Assembly for the 2.0L 16V TiVCT GTDI turbocharged petrol engine (240PS). The turbocharger forms part of the forced-induction system, r...
View full detailsFlywheel Drive Plate for automatic transmission applications. This drive plate bolts to the engine crankshaft and couples it to the torque convert...
View full detailsFront Brake Caliper for the left-hand side, part of the front disc brake assembly. The caliper mounts over the front brake disc and houses the hyd...
View full detailsBrake Caliper for the right-hand front, part of the front disc brake assembly. It mounts over the brake disc and houses the hydraulic pistons and ...
View full detailsTrailing Arm - Rear LH - F2
Trailing Arm for the rear suspension, left-hand (near-side), part of the rear multi-link axle assembly. The trailing arm locates the rear wheel ca...
View full detailsTrailing Arm for the rear suspension, right-hand (off-side), part of the rear multi-link axle assembly. The trailing arm locates the rear wheel ca...
View full detailsRadiator Top Hose for the engine cooling system of the 2.0L TIVCT turbocharged petrol engine. Carries heated coolant from the engine outlet to the...
View full detailsManifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...
View full detailsManifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...
View full detailsBonnet Latch – left-hand (LH) side, part of the bonnet locking mechanism at the front of the vehicle. The latch engages the bonnet striker to hold...
View full detailsCV Boot Kit - Rear A repair kit for the constant-velocity (CV) joint boot on the rear driveshaft, part of the rear axle drive assembly. The CV boo...
View full detailsPinion Flange Nut The retaining nut that secures the drive flange to the differential pinion shaft on the rear axle final drive. Tightened to a sp...
View full detailsBonnet Alarm Switch The bonnet position switch for the vehicle security and anti-theft system. It is mounted at the bonnet latch and detects whethe...
View full detailsPollen Filter The cabin air filter for the heating, ventilation and air conditioning (HVAC) system. It is fitted in the fresh-air intake housing, u...
View full detailsThermostat and Housing for the 2.0L 16V Ti-VCT petrol engine, supplied complete as a sealed assembly. It sits in the engine cooling circuit and reg...
View full detailsThermostat and Housing for the 2.0L 16V Ti-VCT petrol engine, supplied complete as a sealed assembly. It sits in the engine cooling circuit and reg...
View full detailsExhaust Manifold Gasket for the 2.2L CR DI 16V (Td4) turbo diesel engine. It seals the joint between the exhaust manifold and the turbocharger, con...
View full detailsEngine Oil Filter for the 2.0L 16V Ti-VCT petrol engine. It sits in the engine lubrication circuit, filtering the oil delivered by the oil pump to ...
View full detailsEngine Oil Drain Plug for the 2.0L 16V Ti-VCT petrol engine. It threads into the drain point at the base of the oil sump, sealing the lubrication s...
View full detailsRear Suspension Arm Washer is used at the rear knuckle and suspension arm mountings. It sits under the arm fixing bolt, spreading the clamp load a...
View full detailsSensor Assembly
Oil Pan Sealing Ring is a seal used at the oil pan (sump) of the 2.2L diesel engine, within the lubrication system. It maintains an oil-tight join...
View full detailsGlow Plug is a heating element threaded into the cylinder head of the 2.2L CR DI diesel engine, forming part of the pre-heating system. One plug s...
View full detailsBolt and Washer is a fastener set used at the rear cross member and stabiliser bar mounting. It secures the stabiliser (anti-roll) bar and its ass...
View full detailsSensor Assembly
Sensor Assembly
Turbocharger Oil Feed Hose Seal in the turbocharger lubrication circuit. It seals the joint where the pressurised oil feed hose delivers engine oil...
View full detailsWater Pump for the engine cooling circuit. The pump circulates coolant through the cylinder block, cylinder head and radiator to maintain engine op...
View full detailsAir Conditioning Receiver Dryer sits on the high-pressure side of the air conditioning refrigerant circuit, downstream of the condenser. It holds ...
View full detailsAir Conditioning Compressor Plug is a plug fitted at the air conditioning compressor within the vehicle air conditioning system.
O-Ring - A/C Compressor seals the refrigerant line connection at the air conditioning compressor. It forms the gas-tight joint between the compres...
View full detailsWasher Reservoir Cap closes the filler neck of the windscreen washer fluid reservoir. It seals the reservoir against debris ingress and fluid evap...
View full detailsClutch Retainer Tube is a retaining component in the clutch hydraulic release circuit, securing the hydraulic feed tube at the clutch slave cylinde...
View full detailsWater Pump Gasket for the engine cooling circuit. The gasket seals the coolant pump against the cylinder block, sealing the coolant path between th...
View full detailsOil Filter Gasket for the oil cooler and filter assembly. The gasket seals the oil filter housing against its mating face, maintaining the pressuri...
View full detailsCam
Adjusting Washer
Parts for the Range Rover Evoque L538, covering all variants from 2011 to 2019 including the 5-door, 3-door, and convertible, this collection covers pre-facelift and post-facelift specifications. If you own the 2019-onward Evoque, see the L551 parts collection.
The Range Rover Evoque L538 is the first-generation Evoque, produced at Halewood, UK from July 2011 to 2019 under chassis code L538. Model years run from 2012 to 2019. The collection covers the 5-door and 3-door SUV variants (produced through to 2018) and the convertible (produced from 2016 to 2019).
The L538 rides on the D8 platform, also known as LR-MS, a high-strength steel monocoque architecture developed by Land Rover as a heavily modified derivative of the Ford EUCD base. The D8 platform is also used on the Land Rover Discovery Sport. This architecture gives the Evoque a car-like driving character distinct from the body-on-frame and aluminium-intensive platforms used in other Range Rover generations.
Drivetrain configuration varies by variant. Four-wheel drive vehicles use a Haldex-based on-demand AWD system. Front-wheel drive was available on select diesel variants, specifically the eD4, which used a single-clutch, front-axle-only setup for improved efficiency. Confirming your drivetrain before ordering driveline, coupling, or differential components is essential. Generation-specific Haldex AWD service information is published by Haldex.
This collection does not cover the Range Rover Evoque L551 (2019 onward). If your vehicle was registered from 2019 onward, use the L551 parts collection linked in the intro above this product grid.
The L538 production run splits into two distinct specifications at the 2015 model year.
Pre-facelift vehicles (model years 2012 to 2015) used Ford-derived powerplants. Petrol variants used the 2.0L Ford EcoBoost Si4 turbo four-cylinder. Diesel variants used the 2.2L Ford Duratorq (PSA DW12) in TD4 and SD4 states of tune. The automatic gearbox on pre-facelift vehicles is the 6-speed Ford Aisin AW F-21 unit, also designated the Aisin Warner TF-81SC.
Post-facelift vehicles (model years 2016 to 2019) introduced JLR's Ingenium engine family. Both petrol and diesel variants moved to the 2.0L Ingenium turbo four-cylinder. The 9-speed ZF 9HP automatic gearbox replaced the 6-speed unit on automatic variants. The 6-speed Getrag M66EH50 manual remained available in select markets on diesel variants throughout the production run.
Engine-specific parts including oil filters, timing components, gaskets, sensors, and turbo components are not interchangeable between the Ford-derived and Ingenium specifications. Always confirm your engine code and model year before ordering.
Reference note: ZF 9HP transmission technical information is published by ZF Group.
Fitment GuidanceThe most reliable method for confirming parts fitment on an L538 is your Vehicle Identification Number (VIN). The VIN is a 17-character code stamped on the door jamb plate, on the windscreen base near the A-pillar (driver or passenger side depending on market variant), and recorded in your V5C or national registration document.
The tenth character of the VIN encodes the model year. The eighth character encodes the engine variant. If you are ordering engine-specific parts, turbo components, gearbox parts, or any item that changed at the 2015 facelift, cross-referencing your VIN with the part number is strongly recommended before purchase.
If you are unsure which specification your vehicle is, contact the Budget Parts team directly. Trade account holders can request fitment confirmation through the wholesale portal.
Catalogue ScopeThis collection includes suspension parts such as control arms, bushings, drop links, anti-roll bars, shock absorbers, and wheel bearings. Brake parts include pads, discs, calipers, brake pipes, and brake hardware. Engine parts cover oil filters, sump washers, hydraulic tappets, expansion tank caps, and ancillary components. Drivetrain parts include propshaft bolts, driveshaft components, and wheel nuts. The collection also includes electrical parts such as relays and sensors, service and maintenance items including ATF fluids and service hardware, body and chassis fixings, and workshop supplies including brake cleaner and fastener assortments.
Use the category filter above to narrow results to your area of work. The quality filter allows you to select between Genuine Land Rover, OEM, and Aftermarket grades.
Quality TiersEvery part in this collection is marked with one of three quality grades.
Genuine Land Rover parts are sourced through the official Jaguar Land Rover distribution channel. They carry the original Land Rover part number and packaging. These are the appropriate choice when OEM provenance documentation is required, such as for warranty or insurance purposes.
OEM parts are produced by the same manufacturers that supply Land Rover directly, sold outside the official JLR channel. The component is frequently identical to the Genuine part. OEM is the standard choice for independent workshops and experienced owners who want original-specification quality without the official channel markup.
Aftermarket parts are independently manufactured. Quality varies by supplier and application. Each listing specifies the grade, and the product description notes any relevant fitment or application limitations. Aftermarket is appropriate for non-critical components or where cost is the primary constraint.
TradeBudget Parts operates a wholesale portal for registered independent workshops and trade buyers across the EU. The portal provides trade pricing and account-based ordering. If you manage a workshop or operate as a parts buyer, visit the wholesale login page to access trade terms or register your account.
Generation ReferenceThe L538 is the first-generation Evoque. The second-generation Evoque, the L551, entered production in 2019 on the PTA platform with 48V mild-hybrid technology and Ingenium engines throughout. Parts are not interchangeable between generations.
For the full Range Rover model family and generation reference, see the Range Rover parts collection.
Technical GuidesThe articles below provide diagnostic and technical context relevant to Range Rover Evoque L538 owners and workshops. They support, but do not duplicate, the parts categories in this collection.
Technical guide to the L538 covering the Ford-to-Ingenium engine split, Haldex service requirements, and the suspension and platform architecture that defined the first-generation Evoque.
Range Rover Evoque L538 guide →Owner and workshop guide to the Evoque convertible covering the structural changes for the open-roof configuration, the electric roof system, AWD configuration, and common faults relevant to parts selection.
Range Rover Evoque convertible guide →The Freelander 2 shares Haldex AWD architecture and overlapping engine families with the Evoque L538. This guide covers Haldex service intervals, coupling failure patterns, and rear differential diagnosis that applies directly to L538 AWD variants.
Freelander 2 faults and Haldex service guide →The Range Rover Evoque L538 was produced from July 2011 to 2019. Model years run from 2012 to 2019. The 5-door and 3-door SUV variants were produced through to 2018. The convertible variant was introduced in 2016 and produced through to 2019. Parts availability in this collection covers the full L538 production window across all body styles.
If your vehicle was registered before 2019, it is almost certainly the L538 first generation. If registered from 2019 onward, it is the L551 second generation. The clearest confirmation is your VIN. The tenth character of your 17-character VIN encodes the model year. You can also check the driver's door jamb plate, which will show the build date and in some markets the chassis code. If you are unsure, contact Budget Parts directly before ordering.
The L538 was significantly updated at the 2015 model year. Pre-facelift vehicles use Ford-derived engines (2.0L EcoBoost petrol, 2.2L Duratorq diesel) and a 6-speed Aisin automatic gearbox. Post-facelift vehicles use JLR Ingenium engines (2.0L petrol and diesel) and a 9-speed ZF 9HP automatic. Engine-specific parts including oil filters, timing components, turbo components, and gaskets are not interchangeable between these specifications. Always confirm your model year and engine code before ordering.
Four-wheel drive variants of the L538 use an on-demand Haldex AWD system. This couples the rear axle electronically and distributes torque when front-axle slip is detected. Some diesel variants were available in front-wheel drive only, specifically the eD4, which does not use a rear differential or Haldex coupling at all. Confirming your drivetrain configuration before ordering rear axle, coupling, or propshaft components is important. If you are unsure, check your V5C or contact Budget Parts.
The L538 used two engine families across its production run. Pre-facelift vehicles (2012 to 2015 model year) used the 2.0L Ford EcoBoost Si4 turbo petrol and the 2.2L Ford Duratorq (PSA DW12) diesel in TD4 and SD4 outputs. Post-facelift vehicles (2016 to 2019 model year) used JLR's 2.0L Ingenium turbo four-cylinder in both petrol and diesel forms. Parts that are engine-specific are listed with applicable engine codes in the product descriptions.
The L538 uses the D8 platform, also known as the LR-MS. This is a high-strength steel monocoque architecture developed by Land Rover as a substantially redesigned derivative of the Ford EUCD base. The same platform underpins the Land Rover Discovery Sport. It is a different architecture to the aluminium-intensive platforms used on the Range Rover L405 and Range Rover Sport L494.
Yes. Budget Parts operates a wholesale portal for registered workshops and trade buyers across the EU. The portal provides trade pricing and account-based ordering. You can register or log in through the wholesale portal link in the site header. For volume orders or specific part enquiries, contact the Budget Parts team directly.
Updated: 13 May 2026