Range Rover L322 Parts

Water Pump Gasket seals the coolant pump (water pump) to its mounting face within the engine cooling circuit. The gasket forms a leak-tight joint ...

Rear LH height sensor

Crankcase Breather Valve for the crankcase ventilation system of the 4.4L V8 petrol and 4.2L supercharged V8 petrol engines. It regulates the flow ...

Rear Brake Caliper - Left-Hand is part of the rear braking assembly, mounting over the rear brake disc on the left-hand side of the vehicle. The c...

Top Radiator Hose for the Range Rover L322 cooling system, fitted to the M62 B44 4.4L V8 Petrol engine. The upper radiator hose connects the engin...

Brake Caliper Piston for the rear hydraulic disc brake assembly. The piston sits within the caliper bore and transfers hydraulic pressure from the...

Exhaust Manifold Nut is an M8 flanged hex nut that secures the exhaust manifold and turbocharger mounting flanges to the cylinder head. The copper...

Thermostat Assembly for the 4.4L V8 M62 petrol engine cooling circuit, in the air-conditioned configuration. The thermostat regulates coolant flow...

Fuel System Gasket within the multi-point injection assembly. This flat sealing gasket maintains the integrity of the fuel injection circuit at th...

Oil Filter Element for the engine lubrication system of the 3.6L TDV8 (Lion) V8 turbo diesel. This is a replaceable cartridge element that fits ins...

Front Brake Caliper Pin Kit covering both front calipers (left and right). The kit supplies the guide pin hardware required when servicing the fro...

Transmission Sleeve for the ZF 6HP26 and 6HP28 six-speed automatic transmission. It is fitted within the main control valve body, where it forms th...

ABS Wheel Speed Sensor for the front hub, part of the anti-lock braking system. The sensor mounts at the front hub carrier and reads the rotating ...

Valve Cover Gasket for the 4.4L M62 V8 petrol engine, sealing the cylinder head (camshaft) cover to the cylinder head. The gasket seals the perime...

Bonnet Release Cable - Front Section for the Range Rover L322 bonnet release system. The L322 bonnet release operates via a two-part cable run. Th...

Rocker Cover Gasket for the 4.4L V8 petrol engine (M62 B44), fitted to the cylinder bank serving cylinders 1-4. It seals the rocker (valve) cover ...

Front Side & Flasher Lamp - combined side light and front direction indicator unit, part of the front exterior lighting assembly. Houses both ...

Kinetic Recovery Rope - vehicle recovery accessory for extracting a bogged or stuck vehicle. Unlike a static strap, a kinetic rope stretches under...

Alternator for the 3.0L TD6 (M57 D30) six-cylinder turbo diesel charging system, rated at 150 amp output. Belt-driven from the crankshaft pulley, ...

Fuel pump diesel replacement

Oil Temperature Sender located in the engine sump, for the 2.7L TDV6 and 3.6L TDV8 diesel engines. This sender monitors engine oil temperature and...

Front Side and Flasher Lamp, Right-Hand Side. Lamp unit forming part of the front exterior lighting assembly at the right-hand side of the vehicle....

Rear Propshaft Centre Bearing - the intermediate support bearing for the rear propeller shaft, carrying the shaft at the point where its two sectio...

Brake Caliper Piston for the front hydraulic disc brake assembly. The piston operates within the caliper bore and transmits hydraulic pressure fro...

Parking Brake Spring - return spring for the parking brake shoes. The parking brake operates as a drum-in-hat mechanism, with the shoes acting ins...

Coolant Hose connecting the coolant valve to the water pump. Part of the engine cooling circuit, this hose carries coolant between the coolant val...

Parking Sensor is an ultrasonic sensor for the Park Distance Control (parking aid) system. Mounted in the bumper, it emits and receives ultrasonic...

Fuel Injector Sealing Washer - seals the fuel injector where it seats in the cylinder head. Fitted at the base of the injector, it forms the combu...

Transmission Oil Pan & Filter Kit - the lower fluid pan for the ZF 8HP70 8-speed automatic transmission, incorporating an integrated fluid filt...

Towing Jaw rated to 3.5 tonnes, part of the towing/pintle hitch assembly. It provides the jaw coupling for trailer and recovery towing, mounting t...

Headlamp Washer Pump

Major Service Kit for the 3.6L TDV8 V8 turbo diesel engine, grouping the filters and drain plug required for a full engine service under a single p...

Major Service Kit bundles the filters and sump hardware required for a scheduled major service of the 3.0L Td6 (BMW M57) diesel. It provides the e...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

Sump Gasket sealing the oil pan (sump) to the cylinder block. Forms the oil-tight joint between the sump and the engine block, retaining engine oi...

Idler Pulley for the front-end accessory belt drive, 90mm diameter. The idler routes and guides the auxiliary drive belt around the accessory pull...

Gear Selector Linkage Bush in the floor gear-change assembly of the ZF 6HP26 / 6HP28 6-speed automatic transmission. The bush forms the pivot at t...

Halogen Bulb, H8 - 12V 35W single-filament halogen capsule for the exterior lighting system. The H8 uses the PGJ19-1 base and is the 35W member of...

Front Fog Lamp Bulb - H11 halogen capsule rated 12V 55W, operating in the exterior lighting system. The H11 uses the standardised PGJ19-2 base, wh...

Sump Screw for the ZF 6HP26 and 6HP28 six-speed automatic transmission. It retains the transmission sump pan against the gearbox casing, clamping ...

Spring Washer used in the floor-mounted gear change assembly of the ZF 6-speed automatic transmission. It is fitted under the fastener securing th...

Transmission oil drain plug for the ZF 6HP six-speed automatic gearbox, sealing the drain aperture in the transmission fluid pan. The plug is remo...

Valve Body Gasket for the 5L40E five-speed automatic transmission main control assembly. It seals the joint between the valve body and the transmi...

Flanged Nut, M8. The integral flange spreads clamp load across the joint face and removes the need for a separate washer. Used in the exhaust syst...

Exhaust Gasket for the catalytic converter joint in the exhaust system of the V8 turbo diesel (TdV8). The gasket is clamped between the mating exh...

Caliper Kit

Suspension Bolt, M14 x 81mm, from the rear knuckle and suspension arm assembly. It secures a rear suspension arm at its knuckle mounting, passing ...

Handbrake Cable from the parking brake cable circuit - right-hand side. The cable transmits travel from the parking brake control to the expander m...