Range Rover L322 Parts

Crankcase Breather Tube - a hose in the crankcase emission control (crankcase ventilation) system on petrol engines. The tube routes blow-by gases...

Pin, 6 x 36mm, from the timing gear and auxiliary drive assembly of the 5.0L AJ133 V8 petrol engine. It serves as the guide pin for the auxiliary ...

Heater Hose - coolant hose serving the cabin heating circuit on the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). It forms part of the coolant path bet...

Front Brake Pad Set - friction pads for the front disc brake calipers, supplied as a complete axle set covering both front wheels. The pads are cl...

Front Brake Pad Set - friction pads for the front disc brake assembly. Each pad is friction material bonded to a steel backing plate. The pads loc...

Piston Ring Set for the 4.4 TDV8 diesel engine, supplying the rings for one piston at standard bore size. The set provides the compression and oil...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

Crankshaft Front Oil Seal for the timing gear cover, sealing the crankshaft nose where it passes out through the front cover. It runs on the crank...

Intake Manifold Gasket - LH seals the intake (inlet) manifold to the cylinder head on the left-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel en...

Intake Manifold Gasket - RH seals the intake (inlet) manifold to the cylinder head on the right-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel e...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Boost Control Solenoid Valve - an electro-pneumatic vacuum switching valve in the engine vacuum control circuit. The solenoid is energised by the ...

Front Brake Caliper Attachment Kit supplying the pad-retaining and caliper attachment hardware that secures the brake pads in the front caliper bod...

Sensor - Crankshaft Position - C

Fuel Sender Cover seals the top of the in-tank fuel sender unit and incorporates the fuel filter. Fitted to 5.0L V8 petrol applications.

Pulley - Fan

Blind Anchor Nut - a threaded anchor nut that provides a captive fixing point where the reverse side of the panel is inaccessible. It is used in t...

Plate

Piston Ring Set in standard size for the 2.7L TDV6 diesel engine. The piston rings seal the combustion chamber against the cylinder bore, control ...

Oil Cooler & Filter Gasket - sealing gasket for the engine oil cooler and filter assembly on the 3.6L TDV8 diesel (Lion) engine. It seals the ...

Thermostat for the AJ-V8 petrol engine cooling circuit. The thermostat regulates coolant flow between the engine and radiator. It stays closed dur...

Brake Pad - friction pad for the rear disc brake assembly. Mounted in the rear brake caliper, the pad is forced against the brake disc by the cali...

Bolt - M8 x 45 mm Torx-head flange bolt for the propshaft flange connection. The bolt secures the flange-type propshaft joint to the mating drive ...

Inlet Manifold Gasket for the 4.4L AJ-V8 petrol engine, sealing the joint between the inlet manifold and the cylinder head port face. The gasket m...

Oil Cooler & Filter Gasket - sealing gasket for the engine oil cooler and filter assembly on the 3.6L TDV8 diesel (Lion) engine. It seals the ...

Front Brake Pad Set - friction pads for the front disc brake calipers, forming part of the front foundation braking assembly. The pads are carried...

Piston ring set for the 5.0L AJ133 V8 petrol engine, in both naturally aspirated and supercharged form. Part of the cylinder block assembly – cran...

Boost Control Solenoid Valve - an electro-pneumatic vacuum switching valve in the engine vacuum control circuit. The solenoid is energised by the ...

Front Brake Pad Set - friction pads for the front disc brake calipers, supplied as a complete axle set covering both front wheels. The pads are cl...

Coolant Hose - moulded hose in the engine cooling system pipes and hoses assembly. Runs between the coolant mixing valve and the upper radiator ho...

Exhaust Gas Temperature Sensor for the front position of the exhaust after-treatment system on 4.4L V8 turbo diesel engines fitted with a Diesel Pa...

Wiring Harness for the power deployable running board (side step) accessory, part of the lower body guards and shields installation. The harness l...

Front brake pad set for the front disc brake calipers. The pads carry the friction material that the caliper pistons clamp against the brake disc ...

Intercooler to Inlet Manifold Gasket from the charge air induction system of the supercharged 5.0L V8 petrol engine (AJ133). The supercharger and ...

Glass - Rear View Outer Mirror

Piston & Ring Set Range Rover 5.0 N/A

Kit - Caliper Brake Pad

Glass - Rear View Outer Mirror

Clip for the cowl panel. Secures the cowl panel and associated trim at the base of the windscreen, retaining the panel to the body.

Fuel Injector Pressure Sensor - high-pressure fuel rail sensor in the direct-injection fuel supply circuit. It measures the fuel pressure in the i...

Rear Reflector, Right-Hand Side - a passive reflex reflector in the rear lighting assembly. Reflects light from following vehicles to improve rear...

Crankshaft Trigger Wheel provides the timing reference for the crankshaft position sensor. Mounted at the flywheel, the toothed reluctor wheel rot...

Spark Plug for the 4.4L V8 and 4.2L supercharged V8 petrol engines. It ignites the air/fuel mixture in the combustion chamber. One spark plug is r...