Range Rover L322 Parts

Supercharger Air Duct Seal - sealing gasket at the joint between the air intake duct and the supercharger inlet on the 4.2L supercharged V8 petrol ...

PTFE Split Seal - a split polytetrafluoroethylene sealing ring used in the variable cam timing (VCT) gear of the AJ-series V8 petrol engine. The s...

Crankshaft Thrust Washer locates within the crankshaft main bearing assembly, seating at the thrust main bearing journal. It controls crankshaft e...

Cylinder Head Bolt - M10 x 175mm bolt clamping the cylinder head to the block on the AJ-series V8 petrol engine. A torque-to-yield fastener; twent...

Oil Filter for the 3.0L TD6 diesel engine, forming part of the engine lubrication and oil filtration circuit. It removes carbon, metal particles a...

Oil Filter - cartridge type filter element for the 4.4L M62 V8 petrol engine, fitted in the oil cooler and filter housing. It filters the full flo...

Head Gasket - V8 - RH seals the right-hand cylinder head to the engine block on the 4.4L AJ-V8 petrol engine. It forms the gas-tight joint between...

Glow Plug for the diesel cold-start pre-heating circuit. The plug threads into the cylinder head with its heating element projecting into the combu...

Starter Motor Assembly - the electric starter that cranks the engine on ignition. Its pinion engages the ring gear on the flywheel/drive plate to t...

Head Gasket - V8 - LH seals the left-hand cylinder head to the engine block on the 4.4L AJ-V8 petrol engine. It forms the gas-tight joint between ...

Valve Stem Seal for the cylinder head valvetrain on TDV6 and TDV8 diesel engines. Fitted to both inlet and exhaust valves, the seal presses onto th...

Inlet Manifold Gasket for the inlet manifold to cylinder head joint on the M62 B44 4.4L V8 petrol engine. Seals each manifold runner against its c...

Spark Plug for the ignition system of the 5.0L V8 petrol engine (AJ133), in supercharged and naturally aspirated forms. Installed in the cylinder ...

Belt Tensioner Pulley for the upper primary position of the auxiliary drive belt on AJ-V8 engines, covering the 4.4L V8 and 4.2L V8 Supercharged va...

Oil Filter for the engine lubrication system of the 4.4L V8 petrol (EFI) and 4.2L V8 supercharged petrol engines. The filter removes wear particle...

Rocker Cover Gasket for the 4.4L V8 petrol engine (M62 B44), fitted to the cylinder bank serving cylinders 5-8. It seals the rocker (valve) cover ...

Oil Filter for the engine lubrication system of the 4.4L V8 petrol (EFI) and 4.2L V8 supercharged petrol engines. The filter removes wear particle...

Heater Return Hose for the heater coolant circuit of the 4.4L V8 petrol engine. The hose carries coolant on the return side of the heater matrix, r...

Water Pump - coolant pump for the 3.6L V8 TDV8 (Lion) diesel engine. Driven from the engine, it circulates coolant through the block, cylinder hea...

Alternator Assembly

Spark Plug for the 4.4L V8 petrol engine. It sits in the ignition system and delivers the spark that ignites the air-fuel mixture in each combustio...

EGR Valve for the left-hand cylinder bank of the 3.6L V8 TDV8 diesel (Lion) engine, part of the exhaust gas recirculation system. The valve meters...

EGR Valve - RH

Turbocharger Gasket

Glow Plug for the TDV6 2.7L and TDV8 3.6L diesel engines. Glow plugs are installed per cylinder in the cylinder head and heat the combustion chamb...

Belt Tensioner - 4.4 V8 AJ is the automatic tensioner of the accessory (auxiliary) drive belt system, holding the correct running tension on the pr...

O-Ring - Fuel Injector - Diesel - sealing ring in the fuel injector and pipe assembly on diesel engines. The ring seals the injector joint against...

Front Crankshaft Oil Seal seated in the engine front (timing) cover, sealing the crankshaft nose where it exits the crankcase. The seal runs again...

Water Pump is the engine-driven mechanical pump that circulates coolant through the cylinder block, cylinder heads and radiator to maintain engine ...

Thermostat Housing Seal for the engine cooling system, sealing the thermostat housing joint. Fitted between the thermostat housing and its mating ...

Glow Plug for the TDV6 2.7L and TDV8 3.6L diesel engines. Glow plugs are installed per cylinder in the cylinder head and heat the combustion chamb...

Coolant Temperature Sensor in the engine cooling circuit. This sensor monitors coolant temperature and transmits a signal to the engine management...

EGR Valve for the right-hand cylinder bank of the 3.6L V8 TDV8 diesel (Lion) engine, part of the exhaust gas recirculation system. The valve meter...

Mass Air Flow Sensor - air mass meter fitted in the induction tract as part of the engine management system. The sensor sits in the intake ducting...

Exhaust Gasket sealing a flanged joint in the exhaust system on Land Rover and Range Rover models fitted with the 2.7L TDV6, 3.0D V6, 2.2D, and 4.4...

Front Crankshaft Oil Seal for the 4.4L M62 B44 V8 petrol engine, sealing the crankshaft nose at the front of the engine. The seal is fitted into t...

Intercooler Hose - left-hand upper hose in the charge air (intercooler) circuit of the 3.6L V8 32V DOHC turbo diesel (Lion TDV8). It carries press...

Camshaft Cover Bush for the 4.4L M62 B44 V8 petrol engine, fitted at the camshaft cover fixing points on the cylinder head cover. Each bush seats ...

Exhaust Manifold Gasket seals the joint between the exhaust manifold and the cylinder head on the TDV8 3.6L V8 Turbo Diesel engine. This gasket pr...

Glow Plug for the TDV6 2.7L and TDV8 3.6L diesel engines. Glow plugs are installed per cylinder in the cylinder head and heat the combustion chamb...

Belt Tensioner for the auxiliary (accessory) drive belt system. The spring-loaded tensioner arm and pulley maintain the correct tension on the ser...

Valve Stem Seal for the cylinder head valvetrain on TDV6 and TDV8 diesel engines. Fitted to both inlet and exhaust valves, the seal presses onto th...

Valve Rocker Arm for TDV6 and TDV8 diesel engines. This component operates within the cylinder head valve train, transmitting motion from the cams...

Mass Air Flow Sensor - air mass meter fitted in the induction tract as part of the engine management system. The sensor sits in the intake ducting...