Range Rover L322 Parts

Valve Rocker Arm for TDV6 and TDV8 diesel engines. This component operates within the cylinder head valve train, transmitting motion from the cams...

Depression Control Valve mounted on the camshaft cover of the diesel engine. It regulates the internal depression (vacuum) of the engine, maintain...

Idler Pulley for the auxiliary drive belt system on the V8 Petrol engine. This fixed pulley guides the auxiliary drive belt around the engine acce...

Banjo Washer for the oil feed pipe banjo union at the turbocharger, used on TDV6 2.7L/3.0L and TDV8 3.6L/4.4L diesel engines. This sealing washer ...

Rocker Cover Gasket for the 4.4L V8 petrol engine (M62 B44), fitted to the cylinder bank serving cylinders 5-8. It seals the rocker (valve) cover ...

Exhaust Valve for the cylinder head valvetrain. It seals the combustion chamber against the exhaust port and opens to release spent gases into the ...

Exhaust Manifold Stud for TDV6 2.7 and 3.0 and TDV8 3.6 diesel engines, used to fasten the exhaust manifold to the cylinder head. On 2.7 TDV6 engi...

Inlet Valve for the cylinder head valvetrain on 2.7, 3.0 TDV6 and 3.6, 4.4 TDV8 diesel engines. The inlet valve seats in the cylinder head and con...

Cylinder Head Bolt - M10 x 175mm bolt clamping the cylinder head to the block on the AJ-series V8 petrol engine. A torque-to-yield fastener; twent...

Valve Stem Seal for the cylinder head valvetrain on TDV6 and TDV8 diesel engines. Fitted to both inlet and exhaust valves, the seal presses onto th...

Glow Plug for the TDV6 2.7L and TDV8 3.6L diesel engines. Glow plugs are installed per cylinder in the cylinder head and heat the combustion chamb...

Spark Plug - ignition spark plug for the AJ-series V8 petrol engines. Fitted to the 4.4L AJ V8 petrol and 4.2L AJ V8 supercharged petrol engines.

Cylinder Head Bolt for the cylinder head assembly on TDV6 and TDV8 diesel engines. The bolt secures the cylinder head to the engine block, clamping...

Starter Motor Assembly - the electric starter that cranks the engine on ignition. Its pinion engages the ring gear on the flywheel/drive plate to t...

Alternator

Belt polyvee QH L322

Belt alternator RR L322 Dayco

Water Pump Pulley for the engine cooling circuit of the 4.4L V8 Petrol M62 B44 DOHC engine. The pulley mounts to the coolant pump drive flange and...

Oil Filter - cartridge type filter element for the 4.4L M62 V8 petrol engine, fitted in the oil cooler and filter housing. It filters the full flo...

Alternator

Alternator Belt for the TD6 2.9L inline-six turbo diesel engine. It forms part of the auxiliary drive (accessory belt) system, transferring rotatio...

Idler Pulley for the auxiliary drive belt system on the TD6 3.0L inline-6 diesel engine. The idler pulley guides the belt's routing around the fro...

Idler Pulley for the auxiliary belt drive of the 3.6L V8 TDV8 diesel engine. The idler pulley guides and routes the auxiliary (serpentine) drive b...

Idler Pulley for the auxiliary belt drive of the 3.6L V8 TDV8 diesel engine. The idler pulley guides and routes the auxiliary (serpentine) drive b...

Viscous Fan Coupling for the engine cooling system. The viscous coupling drives the engine cooling fan and regulates its speed according to under-...

Fuel Injector for the 3.0L Td6 (BMW M57 D30) common-rail diesel engine. Supplied as a reconditioned unit. The injector delivers precisely metered ...

EGR Valve for the left-hand cylinder bank of the 3.6L V8 TDV8 diesel (Lion) engine, part of the exhaust gas recirculation system. The valve meters...

EGR Valve for the right-hand cylinder bank of the 3.6L V8 TDV8 diesel (Lion) engine, part of the exhaust gas recirculation system. The valve meter...

Air Duct for the engine air intake system, routing charge air to the inlet manifold. Fits the 3.6L Td8 V8 turbo-diesel engine. The duct forms the ...

Glow Plug for the diesel cold-start pre-heating circuit. The plug threads into the cylinder head with its heating element projecting into the combu...

Gasket for the Exhaust Gas Recirculation (EGR) system, sealing the EGR cooler inlet pipe. It seals the joint where the inlet pipe meets the EGR co...

Sealing Ring for the Exhaust Gas Recirculation (EGR) system, measuring 31.03 x 3.5 mm. This O-ring seals a joint in the EGR circuit, containing re...

Gasket

Gasket

Drive Belt Tensioner for the air-conditioning compressor drive on the 3.0L M57 six-cylinder diesel engine. Maintains correct tension on the auxili...

Connecting Rod Assembly for the 2.7L TDV6 diesel engine, part of the crankshaft and piston assembly. The connecting rod links a piston to the cran...

Connecting Rod Bolts for the 2.7L TDV6 diesel engine. They secure the connecting rod cap to the big-end, clamping around the crankshaft journal. Th...

Conrod Bush Discovery 3 / Range Rover Sport 2.7 Tdv6

+20 piston ring set Discovery 3 / Range Rover Sport 2.7 Tdv6

Piston Assembly for the 2.7L TDV6 diesel engine, supplied in the +20 oversize. The piston reciprocates within the cylinder bore of the engine bloc...

Oil seal only rear, Discovery 3 / Range Rover Sport 2.7 Tdv6

Gasket Genuine LR

Throttle Body Gasket A gasket that seals the joint between the throttle body and the intake on the supercharged 4.2L V8 petrol engine. It seals th...