Range Rover L322 Parts

Exhaust Manifold Stud secures the exhaust manifold flange to the cylinder head within the exhaust assembly. This is a double-ended stud, threaded ...

EGR Thermostat Assembly that regulates coolant flow through the exhaust gas recirculation (EGR) cooler on the 2.7-litre V6 and 3.6-litre V8 diesel ...

Rocker Cover Gasket for the 4.4L V8 petrol engine (M62 B44), fitted to the cylinder bank serving cylinders 1-4. It seals the rocker (valve) cover ...

Alternator for the 3.0L TD6 (M57 D30) six-cylinder turbo diesel charging system, rated at 150 amp output. Belt-driven from the crankshaft pulley, ...

Oil Temperature Sender located in the engine sump, for the 2.7L TDV6 and 3.6L TDV8 diesel engines. This sender monitors engine oil temperature and...

Idler Pulley for the auxiliary drive belt system on the V8 Petrol engine. This fixed pulley guides the auxiliary drive belt around the engine acce...

Coolant Temperature Sensor in the engine cooling circuit. This sensor monitors coolant temperature and transmits a signal to the engine management...

Fuel Injector Sealing Washer - seals the fuel injector where it seats in the cylinder head. Fitted at the base of the injector, it forms the combu...

Oil Filter for the 3.0L TD6 diesel engine, forming part of the engine lubrication and oil filtration circuit. It removes carbon, metal particles a...

Front Crankshaft Oil Seal seated in the engine front (timing) cover, sealing the crankshaft nose where it exits the crankcase. The seal runs again...

Rocker Cover Gasket for the 4.4L V8 petrol engine (M62 B44), fitted to the cylinder bank serving cylinders 1-4. It seals the rocker (valve) cover ...

Sump Gasket sealing the oil pan (sump) to the cylinder block. Forms the oil-tight joint between the sump and the engine block, retaining engine oi...

Idler Pulley for the front-end accessory belt drive, 90mm diameter. The idler routes and guides the auxiliary drive belt around the accessory pull...

Sump Gasket sealing the oil pan (sump) to the cylinder block. Forms the oil-tight joint between the sump and the engine block, retaining engine oi...

Idler Pulley for the front-end accessory belt drive, 90mm diameter. The idler routes and guides the auxiliary drive belt around the accessory pull...

Exhaust System Screw, M8 x 20 mm. Used on exhaust and turbocharger joints - securing the catalytic converter to its mating pipe section, and at tu...

Oil Filler Cap for the engine oil filler neck on the camshaft cover, within the engine lubrication and crankcase ventilation assembly. The cap sea...

Camshaft Cover Bush for the 4.4L M62 B44 V8 petrol engine, fitted at the camshaft cover fixing points on the cylinder head cover. This is the screw...

Inlet Manifold Seal for the 4.4L AJ V8 petrol engine, sealing the lower inlet manifold to the cylinder head within the air induction system. It cl...

Front Crankshaft Oil Seal for the M47 2.0L 16V and M57 3.0L diesel engines, sealing the crankshaft nose at the front of the engine. The seal locat...

Service PCV Kit

Oil Filter Gasket from the oil cooler and filter housing assembly of the 4.4L DOHC DITC V8 diesel. The gasket seals the oil filter housing against...

PCV Valve Service Kit - service parts for the positive crankcase ventilation valve, which sits in the crankcase emission control system on the cyli...

MAP Sensor - the manifold absolute pressure sensor in the engine management system, mounted on the inlet manifold. It measures the pressure of the...

Exhaust Valve for the cylinder head of the 5.0L AJ133 V8 petrol engine. The valve opens to release spent combustion gases from the cylinder into t...

Absolute Pressure Sensor mounted in the throttle housing of the 4.2L supercharged V8 petrol engine. It measures absolute pressure in the intake tra...

Accessory Drive Belt transmits drive from the crankshaft pulley to the engine's ancillary components. This multi-ribbed (poly-V) belt serves the a...

Accessory Drive Belt for the 3.0L V6 turbo diesel engine, part of the front-end accessory drive. This multi-ribbed (poly-V) belt is driven by the ...

Oil Pressure Switch Assembly, part of the engine lubrication system. Threaded into the oil gallery, it senses engine oil pressure and signals the ...

Air Intake Duct for the engine air intake on the 4.4L V8 Diesel. This duct forms the inlet manifold connector, carrying charge air into the inlet ...

Air Duct - Inlet Manifold Connector in the charge-air induction system of the 4.4L V8 diesel. The connector joins the charge-air ducting to the in...

Throttle Body Heater Inlet Hose in the engine cooling circuit of the 5.0L V8 Petrol (AJ133) engine. The hose carries engine coolant to the throttl...

Auxiliary Drive Belt transmits drive from the crankshaft pulley to the belt-driven engine ancillaries in the front-end accessory drive. Routed ove...

Auxiliary Drive Belt transmits drive from the crankshaft pulley to the belt-driven engine ancillaries in the front-end accessory drive. Routed ove...

Timing Chain Guide that locates and supports the timing chain along its run within the timing drive. It controls the chain path and reduces vibrat...

Timing Chain Guide - guides the primary timing chain along its run. Maintains correct alignment and tension on the primary timing drive, keeping c...

Timing Chain Guide - guides the timing chain along its run. Maintains correct alignment and tension on the timing drive, keeping crankshaft-to-cam...

Timing Chain Guide for the primary timing chain, fitted on the right-hand side of the timing drive. It locates and supports the chain along its ru...

Timing Chain Blade is the tensioner blade in the engine's timing chain drive. It provides the curved, low-friction face that the timing chain bears...

Thermostat Tube carries engine coolant between the thermostat housing and the engine on the supercharged 3.0L V6 and 5.0L V8 petrol engines. It run...

Water Pump Gasket for the coolant pump on 5.0L V8 (AJ133) and 3.0L supercharged V6 petrol engines. The gasket seals the joint between the water pu...

Gasket - Throttle

Throttle Housing Gasket - seals the throttle body to the intake manifold. Forms the air-tight joint between the electronic throttle housing and th...

Fuel Injector Refit Kit - the seals and retainer required when removing and refitting a fuel injector on 3.0L V6 and 5.0L V8 supercharged petrol en...