Range Rover L322 Parts

Gasket - Oil Filter to Block seals the joint between the oil filter housing and the cylinder block, within the Oil Cooler and Filter assembly. It ...

Hex Head Nut - M14 x 70mm. Crankshaft pulley fixing. It secures the crankshaft pulley and drive-belt assembly at the crankshaft nose, seating agai...

Secondary Drive Belt from the front end accessory drive, 1444 mm in length and eight-ribbed. It runs from the crankshaft pulley over the tensioner...

Inlet Manifold Gasket - 5.0 V8 - RH seals the inlet manifold to the cylinder head on the right-hand bank of the 5.0 litre V8 petrol (AJ133) engine,...

Exhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...

Intake Manifold Gasket - RH seals the intake (inlet) manifold to the cylinder head on the right-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel e...

Breather Tube - crankcase ventilation tube within the engine's emission control system. It routes crankcase gases from the engine back into the in...

Kit - Tension Pulley

Cam Cover Gasket for the right-hand cylinder head of the 5.0L AJ133 V8 petrol engine, part of the camshaft cover assembly. The gasket seals the jo...

Inlet Valve - cylinder head inlet (induction) valve for the 5.0L V8 AJ133 supercharged petrol engine. The inlet valve admits the intake charge int...

Timing Tensioner Screw - M8 x 45mm is the fastener that secures the chain tensioner within the timing gear assembly of the 5.0 litre V8 petrol (AJ1...

Oil Pan Gasket - sealing gasket between the oil pan (sump) and the cylinder block on the 3.6L TDV8 diesel (Lion) engine. It seals the sump-to-bloc...

Gasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...

Oil Cooler Seal Kit

Transmission Oil Drain Plug for the ZF 6HP26 and 6HP28 six-speed automatic transmission - Transmission External Components assembly group. M18 x 1...

Timing Gear Bolt from the engine timing drive, securing the camshaft sprocket and variable camshaft timing adjuster to the camshaft. It provides t...

Crankshaft Position Sensor for engine management, mounted in the lower cylinder block and oil pan area facing the crankshaft reluctor ring. As the...

Screw, M6 x 38mm, from the timing gear assembly - timing chains, tensioners and guides, and the auxiliary drive. It retains the chain guide in pos...

Water Manifold Gasket for the engine cooling and heater circuit - it seals the water manifold tube where it leaves the cylinder block and feeds the...

Crankcase Breather Tube - a hose in the crankcase emission control (crankcase ventilation) system on petrol engines. The tube routes blow-by gases...

Pin, 6 x 36mm, from the timing gear and auxiliary drive assembly of the 5.0L AJ133 V8 petrol engine. It serves as the guide pin for the auxiliary ...

Piston Ring Set for the 4.4 TDV8 diesel engine, supplying the rings for one piston at standard bore size. The set provides the compression and oil...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

Crankshaft Front Oil Seal for the timing gear cover, sealing the crankshaft nose where it passes out through the front cover. It runs on the crank...

Intake Manifold Gasket - LH seals the intake (inlet) manifold to the cylinder head on the left-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel en...

Intake Manifold Gasket - RH seals the intake (inlet) manifold to the cylinder head on the right-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel e...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

Boost Control Solenoid Valve - an electro-pneumatic vacuum switching valve in the engine vacuum control circuit. The solenoid is energised by the ...

Sensor - Crankshaft Position - C

Pulley - Fan

Piston Ring Set in standard size for the 2.7L TDV6 diesel engine. The piston rings seal the combustion chamber against the cylinder bore, control ...

Oil Cooler & Filter Gasket - sealing gasket for the engine oil cooler and filter assembly on the 3.6L TDV8 diesel (Lion) engine. It seals the ...

Inlet Manifold Gasket for the 4.4L AJ-V8 petrol engine, sealing the joint between the inlet manifold and the cylinder head port face. The gasket m...

Oil Cooler & Filter Gasket - sealing gasket for the engine oil cooler and filter assembly on the 3.6L TDV8 diesel (Lion) engine. It seals the ...

Piston ring set for the 5.0L AJ133 V8 petrol engine, in both naturally aspirated and supercharged form. Part of the cylinder block assembly – cran...

Boost Control Solenoid Valve - an electro-pneumatic vacuum switching valve in the engine vacuum control circuit. The solenoid is energised by the ...

Intercooler to Inlet Manifold Gasket from the charge air induction system of the supercharged 5.0L V8 petrol engine (AJ133). The supercharger and ...

Piston & Ring Set Range Rover 5.0 N/A

Crankshaft Trigger Wheel provides the timing reference for the crankshaft position sensor. Mounted at the flywheel, the toothed reluctor wheel rot...

Spark Plug for the 4.4L V8 and 4.2L supercharged V8 petrol engines. It ignites the air/fuel mixture in the combustion chamber. One spark plug is r...

Oil Cooler Element - the heat-exchanger core of the engine oil cooler and filter assembly. The element transfers heat from the engine oil into the...

Glow plug for the diesel cold-start pre-heating system. It threads into the cylinder head with the heater tip projecting into the combustion chambe...

Heater plug OEM DELPHI / BERU

EGR Cooler Gasket for the exhaust gas recirculation (EGR) system on the 3.6L V8 diesel engine. It seals the joint between the EGR cooler and its i...