Range Rover Parts

Brake Pad Spring for the front disc brake caliper assembly. The spring clip locates in the caliper body and preloads the brake pads against their ...

Brake Pad Spring for the rear disc brake caliper assembly. The spring clip locates in the caliper body and preloads the brake pads against their a...

Brake Caliper Screw for the front brake caliper and parking brake installation. Retains the caliper or its carrier to the mounting face on the hub...

Screw – M10 x 26 for the rear brake assembly. Secures rear brake components to their mounting face, with an M10 thread and 26 mm length. Brake fi...

Caliper Guide Pin Dust Cover for the guide pin (slider pin) in the disc brake caliper assembly. The boot seals the guide pin bore in the caliper c...

Brake Caliper Carrier - Rear - the fixed bracket of the rear sliding-caliper brake assembly. The carrier bolts to the rear hub carrier and holds t...

Brake Caliper Carrier - Rear - the fixed bracket of the rear sliding-caliper brake assembly, dimensioned for the rear disc size used with the 18-in...

ABS Wheel Speed Sensor is part of the anti-lock braking system. Mounted at the wheel hub, it generates a signal proportional to wheel rotation and...

Front ABS wheel speed sensor, part of the anti-lock braking system's wheel speed sensing circuit. The sensor is mounted in the front hub carrier a...

Front ABS wheel speed sensor, part of the anti-lock braking system's wheel speed sensing circuit. The sensor is mounted in the front hub carrier a...

Screw - threaded fastener specified in two unrelated assemblies: securing components to the cylinder block of the 2.5L 5-cylinder turbo diesel engi...

Rear Brake Disc - solid (non-vented), cross-drilled and grooved - the rotating friction element of the rear disc brake assembly. The rear axle car...

Rear Brake Disc - Cross-Drilled and Grooved - vented, 325 mm diameter. Part of the rear brake discs and calipers assembly. The disc mounts to the ...

Hex Socket Screw, M8 x 20 - hexagon socket head fixing screw. Used on diesel engine installations at points where a conventional hexagon head cann...

Piston Ring Set - 0.020in Oversize - 300TDi

Front Suspension Bolt from the front suspension arm, stabiliser bar and cross-member mounting group. It is one of the fasteners clamping the front...

Hex Head Bolt is a hexagonal-head threaded fastener used as a mounting bolt on the vehicle. It is driven with a standard hexagonal socket or spanner.

Distributor Cap for the ignition distributor assembly on the Rover V8 petrol engine. The cap locates over the distributor body and carries the eig...

Rear Knuckle Bolt belongs to the rear knuckle and suspension arm assembly. It forms the pivot fastener where a rear suspension arm meets the rear ...

Hex Nut is an M6 flange nut with a 10mm hexagonal drive. It retains wheel arch liner and splashguard panels on their mounting studs. The integral ...

Grommet for the inspection aperture in the rear brake backplate. The backplate carries an access hole through which the parking brake shoe adjuster...

Nut and Washer Assembly is an M6 hexagonal nut supplied together with its washer as a single assembly. The washer spreads the clamping load across...

Gasket Sealant - a non-setting jointing compound to the Hylomar 2000 specification, used on engine and transmission joint faces where a liquid seal...

Automatic Transmission Fluid to Dexron III H specification, for filling and topping up the automatic gearbox. Within the transmission the fluid ac...

Rocker Cover Gasket for the 2.5L six-cylinder M51 turbo diesel, part of the cylinder head and valve gear sealing group. The gasket seals the joint...

Locking Wheel Nut for alloy road wheels. Fitted in place of one standard wheel nut per wheel, it uses a keyed pattern in place of the plain hexago...

Main Bearing Set for the crankshaft main journals of the 2.5 litre four-cylinder diesel engine (naturally aspirated, turbo diesel, 200 Tdi and 300 ...

Main Bearing Set, standard size, in copper-lead bearing material, for the crankshaft main journals of the 2.5 litre four-cylinder diesel engine (na...

Side Repeater Bulb for the wing-mounted repeater lamp in the exterior lighting circuit. The repeater flashes in phase with the direction indicators...

Banjo Bolt for the injector leak-off connection on the 2.5L 200 TDi and 300 TDi turbo diesel engines. The bolt passes through the eye of the leak-...

Rear Brake Pad Set for the rear disc brake assembly. The pads are clamped by the caliper pistons against the disc faces to generate braking torque...

Ceramic Front Brake Pads for the front disc brake assembly, specified for solid (non-vented) front discs. The pads are clamped by the caliper pist...

Brake Pad Set - Front - friction pads for the front disc brake caliper assembly, for the vented front disc installation. The pads locate in the fr...

Camshaft Cover Bush for the 4.4L M62 B44 V8 petrol engine, fitted at the camshaft cover fixing points on the cylinder head cover. This is the screw...

Piston Ring Set for the 2.5L six-cylinder diesel, comprising the compression and oil control rings for one piston. The rings seal combustion press...

Front Brake Pads - Ceramic Front axle disc brake pads, part of the front braking assembly. The pads are carried in the front caliper and are clamp...

Accessory Drive Belt for the engine accessory (ancillary) drive on 2.0L GTDi and second-generation 2.0L turbocharged petrol engines. The belt is d...

Sensor - ABS - Vented

Accessory Drive Belt for the engine accessory (ancillary) drive on the 2.2L Td4 diesel engine. The belt is driven from the crankshaft pulley and r...

Drive Belt

Secondary Accessory Drive Belt - the supercharger drive belt within the front end accessory drive of the supercharged petrol V6 and V8 engines. Th...

Front Crankshaft Oil Seal for the M47 2.0L 16V and M57 3.0L diesel engines, sealing the crankshaft nose at the front of the engine. The seal locat...