Range Rover Parts

Fuel Filter is the in-line filter for the pressurised supply side of the V8 EFI fuel injection system. It is mounted in the fuel line between the ...

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...

Front Brake Pad Set for the front disc brake and caliper assembly, supplied as a front axle set. The pads sit in the front caliper carriers and ar...

Front Suspension Arm Bush is the compliance bush pressed into the front suspension arm where it mounts to the body structure. The bush carries the...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

Upper Front Suspension Arm Ball Joint The upper ball joint forms the top pivot between the front upper suspension arm and the wheel knuckle, holdi...

Exhaust Gas Temperature Sensor for the rear-of-catalyst position in the diesel exhaust aftertreatment system, on vehicles fitted with a diesel part...

Torque Converter Seal Kit - ZF 8-Speed

Inlet Manifold Gasket - seals the inlet manifold to the cylinder head on the 5.0L V8 AJ133 naturally aspirated petrol engine. The gasket closes th...

Lambda Sensor - left-hand bank exhaust gas oxygen sensor for the 5.0L AJ133 V8 petrol engine, mounted in the front pipe and catalyst section of the...

Accessory Drive Belt - ribbed serpentine belt for the front-end accessory drive of the 5.0L naturally aspirated V8 petrol engine. Driven from the ...

Wiper Blade - Rear is the rear window wiper blade, supplied as a complete assembly. It mounts to the rear wiper arm and clears the tailgate glass ...

Haldex Coupling Seal Kit - the oil seal kit for the rear-axle Haldex coupling on all-wheel-drive models. Renews the fluid seals of the Haldex coup...

Turbocharger Hose connects the turbocharger outlet to the intercooler inlet within the charge-air system. It carries pressurised, heated charge ai...

Upper Front Suspension Arm Ball Joint The upper ball joint forms the top pivot between the front upper suspension arm and the wheel knuckle, holdi...

A-frame bush for the rear suspension upper link, part of the rear axle location assembly. The A-frame is the upper link between the rear axle and ...

Accessory Drive Belt - ribbed serpentine belt for the front-end accessory drive of the 5.0L naturally aspirated V8 petrol engine. Driven from the ...

Front Brake Disc - vented rotor for the front axle, part of the front brake disc and caliper assembly. It mounts to the front hub and provides the...

Front Brake Pad Set - Less Springs - friction pads for the front disc brake assembly, mounted in the front caliper and clamping the front brake dis...

Exhaust Gas Temperature Sensor for the exhaust after-treatment system of the 3.0L V6 diesel engine, fitted at the centre (middle) position. It mon...

Outer Track Rod End with an M12 ball joint stud, forming the outer connection in the steering linkage. The track rod end threads onto the tie rod ...

Shock Absorber - Rear, sized and valved for suspension raised by approximately 2" (50 mm), operating between the rear axle and the chassis mounting...

Cylinder Head Gasket seals the joint between the cylinder head and the engine block on the 3.0L V6 turbo diesel engine, containing combustion press...

Rear Axle Reinforcing Kit - a four-piece set of pre-cut, weld-on reinforcing sections for the rear axle casing, profiled to suit the long-nose Rove...

Front Brake Disc - vented rotor for the front braking assembly. The disc mounts to the front wheel hub and provides the friction surface the brake...

Front brake disc - vented, cross-drilled and grooved, for the front brake assembly. The disc runs between the caliper pads and transfers braking t...

Nyloc Nut - 3/8 UNF self-locking nut with a nylon insert in the collar. The insert grips the bolt thread and resists loosening under vibration. Us...

Coolant Return Elbow Hose is a moulded 180-degree elbow within the engine cooling system pipework, forming the return connection in the coolant cir...

Exhaust Manifold Gasket - right-hand side seals the exhaust manifold against the cylinder head face on the right-hand bank of the engine. It conta...

Outer Track Rod End with an M12 ball joint stud, forming the outer connection in the steering linkage. The track rod end threads onto the tie rod ...

Water Manifold Gasket for the engine cooling and heater circuit - it seals the water manifold tube where it leaves the cylinder block and feeds the...

Sensor Assembly fitted to the fuel filter housing on the 3.0L M57 D30 diesel engine, within the fuel supply circuit. It threads into the filter ho...

Variable Valve Timing Solenoid - Inlet for the 2.0L 16V TiVCT turbocharged petrol engine, controlling oil flow to the intake camshaft phaser. The ...

Side Repeater Lamp - Front - Exterior Lighting assembly group, direction indicator circuit. Mounted in the front wing panel ahead of the door and ...

Headlight Switch is the dashboard rotary lighting switch mounted in the facia lighting panel. It switches the side, dip and main-beam lighting cir...

Brake Pads - Front - Less Springs - friction pads for the front axle, supplied as a complete axle set (one set per axle). The pads locate in the f...

Water Pump for the engine cooling circuit. The pump circulates coolant through the cylinder block, cylinder head and radiator to maintain engine op...

Air Temperature Sensor for diesel applications, forming part of the engine management sensing circuit on the air intake side. The sensor measures ...

Exhaust Gas Temperature Sensor for diesel exhaust aftertreatment, fitted on the right-hand side of the exhaust in the front pipe and catalyst area ...

Diverter Solenoid Valve is the turbocharger compressed-air recirculation (diverter) valve in the boost-control circuit. On throttle lift-off it re...

Lower Engine Mount (engine support insulator) securing the engine at its lower mounting point. It carries the lower engine load and damps engine v...

Exhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...

Oil Seal for the oil level sensor where it passes through the wall of the oil pan (sump). The sensor is retained in the sump and this ring forms t...

Front Brake Disc with a corrosion-protective coating, for the front axle braking system. The disc forms the friction surface that the front brake ...