Range Rover Sport L320 Parts

Inlet Manifold Air Duct is the moulded elbow that routes charge air into the inlet manifold on the 3.6 litre V8 32V DOHC Td8 diesel engine. It joi...

Spark Plug Aperture Gasket seals the spark plug aperture in the cylinder head cover on the left hand cylinder bank. It closes the joint between th...

Chain - Timing

Brake Pad Set for the rear disc brake assembly. The pads sit in the rear caliper carrier and are clamped against the brake disc by the caliper pis...

O-Ring seals the variable valve timing (VVT) solenoid within the timing gear and sprocket assembly. It maintains an oil-tight joint between the VV...

Inlet Manifold Gasket - 5.0 V8 - RH seals the inlet manifold to the cylinder head on the right-hand bank of the 5.0 litre V8 petrol (AJ133) engine,...

Sensor

Crankcase Breather Hose forms part of the crankcase emission control (ventilation) system on the 4.4L V8 AJ petrol engine. It carries crankcase bl...

Spark Plug Aperture Gasket for the right-hand camshaft cover, sealing the spark plug well against oil ingress. The camshaft cover carries a tube f...

Gasket - Oil Filter to Block seals the joint between the oil filter housing and the cylinder block, within the Oil Cooler and Filter assembly. It ...

Hex Head Nut - M14 x 70mm. Crankshaft pulley fixing. It secures the crankshaft pulley and drive-belt assembly at the crankshaft nose, seating agai...

Secondary Drive Belt from the front end accessory drive, 1444 mm in length and eight-ribbed. It runs from the crankshaft pulley over the tensioner...

Exhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...

Air Conditioning O-Ring - a sealing ring for the air conditioning refrigerant circuit. It seals the joints between refrigerant lines and component...

Intake Manifold Gasket - RH seals the intake (inlet) manifold to the cylinder head on the right-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel e...

Breather Tube - crankcase ventilation tube within the engine's emission control system. It routes crankcase gases from the engine back into the in...

Cam Cover Gasket for the right-hand cylinder head of the 5.0L AJ133 V8 petrol engine, part of the camshaft cover assembly. The gasket seals the jo...

Timing Tensioner Screw - M8 x 45mm is the fastener that secures the chain tensioner within the timing gear assembly of the 5.0 litre V8 petrol (AJ1...

Gasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...

Timing Gear Bolt from the engine timing drive, securing the camshaft sprocket and variable camshaft timing adjuster to the camshaft. It provides t...

O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...

Water Manifold Gasket for the engine cooling and heater circuit - it seals the water manifold tube where it leaves the cylinder block and feeds the...

Crankcase Breather Tube - a hose in the crankcase emission control (crankcase ventilation) system on petrol engines. The tube routes blow-by gases...

"TDV8" Name Plate - 9 cm engine-designation name plate identifying the TDV8 diesel V8 variant. Applied to the exterior body as an engine identifier.

Pin, 6 x 36mm, from the timing gear and auxiliary drive assembly of the 5.0L AJ133 V8 petrol engine. It serves as the guide pin for the auxiliary ...

Heater Hose - coolant hose serving the cabin heating circuit on the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). It forms part of the coolant path bet...

Crankshaft Front Oil Seal for the timing gear cover, sealing the crankshaft nose where it passes out through the front cover. It runs on the crank...

Front Brake Caliper Attachment Kit supplying the pad-retaining and caliper attachment hardware that secures the brake pads in the front caliper bod...

Pulley - Fan

Blind Anchor Nut - a threaded anchor nut that provides a captive fixing point where the reverse side of the panel is inaccessible. It is used in t...

Thermostat for the AJ-V8 petrol engine cooling circuit. The thermostat regulates coolant flow between the engine and radiator. It stays closed dur...

Oil Cooler & Filter Gasket - sealing gasket for the engine oil cooler and filter assembly on the 3.6L TDV8 diesel (Lion) engine. It seals the ...

Intercooler to Inlet Manifold Gasket from the charge air induction system of the supercharged 5.0L V8 petrol engine (AJ133). The supercharger and ...

Fuel Injector Pressure Sensor - high-pressure fuel rail sensor in the direct-injection fuel supply circuit. It measures the fuel pressure in the i...

Spark Plug for the 4.4L V8 and 4.2L supercharged V8 petrol engines. It ignites the air/fuel mixture in the combustion chamber. One spark plug is r...

EGR Cooler Gasket for the exhaust gas recirculation (EGR) system on the 3.6L V8 diesel engine. It seals the joint between the EGR cooler and its i...

Gasket for the Exhaust Gas Recirculation (EGR) system, sealing the EGR cooler inlet pipe. It seals the joint where the inlet pipe meets the EGR co...

Inlet Manifold Air Duct - routes charge air into the inlet manifold as part of the engine air intake, carrying incoming air from the intake system ...

Thermostat Coolant Tube - a rigid coolant pipe serving the thermostat housing in the engine cooling circuit. It carries coolant between the thermos...

EGR Sealing Ring for the 3.6L V8 diesel engine (TdV8), used at a pipe joint in the exhaust gas recirculation (EGR) system. This O-ring, 31.03 x 3....

Fuel Injection Pump Gasket for the 3.6L V8 diesel engine (TdV8), sealing the high-pressure fuel injection pump to its mounting on the engine. It f...

Sealing Ring for the Exhaust Gas Recirculation (EGR) system, measuring 31.03 x 3.5 mm. This O-ring seals a joint in the EGR circuit, containing re...

EGR Outlet Pipe Gasket for the 3.6L V8 diesel engine (TdV8), used in the exhaust gas recirculation (EGR) system. It seals the outlet pipe joint of...

Turbocharger Oil Return Tube Gasket for the 3.6L V8 turbo-diesel (TdV8) engine. It seals the joint at the turbocharger oil return (drain) tube, whe...

Crankcase Ventilation Valve (PCV valve) for the crankcase emission control system. It regulates the flow of blow-by gases from the crankcase into ...

Power Steering Reservoir Cap - the screw cap that closes the power steering fluid reservoir in the hydraulic steering circuit. It seals the reserv...