DA4062 - Exhaust Clamp – 45mm

- €2,40

€2,40

€2,40 - €2,40

€2,40

Tip: Log in to your account to unlock volume discounts on this item.

OEM: Made by an Original Equipment Manufacturer. This part is made by an original equipment manufacturer or under their license, ensuring compatibility and quality.

Exhaust Clamp secures a joint in the exhaust system, clamping two pipe sections together at the union.

Sized for exhaust pipe with a 45 mm outer diameter, it holds the joint tight to maintain a gas-tight seal and support the pipe run. Supplied as a single clamp.

Alternative Codes

250-245GA4062DA4062

In stock 17 units

11 · Gouda 6 · Drachten

Express delivery available

When will my order arrive?

Order before 15:00 (Mon–Fri): same-day dispatch for in-stock items.
UPS Express (order before 14:00): dispatched today, delivered tomorrow where available.
Netherlands / Belgium / Germany: 2–4 working days.
Other EU countries + UK: 4–8 working days.
Outside EU/UK: delivery times vary — contact us for an estimate.

Items may ship from multiple warehouses at no extra cost.

Job kits containing this part

This part is included in 0 job kit(s) below. Pick the kit that matches your vehicle and job, then add what you need.

Frequently asked questions

What is the 45mm exhaust clamp used for?

The 45mm exhaust clamp joins two exhaust pipe sections at a union, clamping them together to hold a gas-tight seal. It's sized for pipe with a 45mm outer diameter and supports the pipe run within the exhaust system. Supplied as a single clamp.

How many exhaust clamps do I need?

You'll typically need one clamp per pipe joint. A full exhaust system replacement usually uses several, one at each union along the run. Check how many joints your exhaust has, since the 45mm size only suits pipe with a matching 45mm outer diameter.

What are the signs an exhaust clamp needs replacing?

A failing exhaust clamp usually shows as a blowing or ticking noise from the joint, a change in exhaust note, or visible corrosion at the union. Clamps rust and lose tension over time, letting the joint leak. Renew the clamp whenever the exhaust joint is disturbed.

Can I fit the exhaust clamp myself?

Fitting the 45mm exhaust clamp is typically a straightforward job needing only a socket or spanner. Clean the pipe ends first, seat the clamp squarely over the joint, and tighten evenly so the seal pulls up tight. Access is easier with the vehicle raised.

Frequently Bought With

Products most often purchased alongside this one.

16 items

Aftermarket

NRC4218 - Exhaust Y-Pipe – V8 Petrol

€79,30 excl. VAT

OEM

555111G - Exhaust Flange – V8 – Early

€50,20 excl. VAT

OEM

NRC4219 - Exhaust Downpipe – LH – V8

€35,10 excl. VAT

Aftermarket

FB108081L - Flange Bolt – M8 x 40

€1,20 excl. VAT

OEM

FN108046 - Flanged Nut – M8

€0,80 excl. VAT

Aftermarket

RTC211710 - Con Rod Bearing Set – .010" – V8

€24,00 excl. VAT

OEM

RTC3570 - Spark Plug – RN14YC

€5,30 excl. VAT

Aftermarket

ERR2958 - Crankshaft Timing Chain Sprocket – V8

€8,50 excl. VAT

OEM

DA4063 - Exhaust Clamp – 60mm

€2,60 excl. VAT

OEM

252623 - Exhaust Manifold Stud – V8

€2,10 excl. VAT

OEM

395142 - Lock Set – Front Door – Anti-Burst

€23,10 excl. VAT

Aftermarket

ANR1808 - Engine Mounting – Rubber – 4-Cyl

€5,30 excl. VAT

OEM

BH506161L - Bolt – 3/8" UNC x 2"

€5,10 excl. VAT

OEM

DBP7104 - Exhaust Mounting – Rubber

€7,10 excl. VAT

OEM

ERC2320 - Outlet Hose – 3.5L V8

€3,60 excl. VAT

Aftermarket

ERC3606 - Exhaust Manifold Gasket – 3.5L V8

€1,00 excl. VAT