Products

Brake Caliper Piston Kit - replacement pistons for the rear brake caliper. The pistons run in the caliper bores and, under hydraulic pressure, pre...

Countersunk Screw is used to secure side door latch strikers on the Defender. The striker is the fixed plate in the door aperture that the door la...

Screw - M8 x 25mm is a fastener used in the assembly of the LT230 transfer gearbox. The LT230 is a two-speed transfer box fitted to Defender, Disc...

Brake Pad Set for the rear disc brakes, supplied as an axle set together with a fitting kit. The brake pads are the friction elements that the cal...

Exhaust Valve Guide is pressed into the cylinder head and supports the exhaust valve stem, keeping it accurately centred as the valve opens and clo...

Brake Pipe for the rear right-hand side of the hydraulic braking circuit. This rigid metal pipe carries pressurised brake fluid along the chassis t...

Brake Pipe for the rear left-hand side of the hydraulic braking circuit. This rigid metal pipe carries pressurised brake fluid along the chassis to...

Brake Pipe - rigid hydraulic brake line serving the front-left circuit on ABS-equipped vehicles. It carries pressurised brake fluid through the fr...

Brake Pipe - rigid hydraulic brake line serving the front-right circuit on ABS-equipped vehicles. It carries pressurised brake fluid through the f...

Setscrew used as a general-purpose fastener in engine bay ancillary and drivetrain assemblies. Applied at engine harness mounting points, bell hou...

Steering Stop Bolt - M12 x 50mm shouldered hex-head bolt for the front axle steering lock assembly. This bolt sets the maximum steering lock angle...

Bolt, 3/8" BSF x 5/8", a British Standard Fine threaded fastener used at the front axle. It secures the track rod protection bracket to the front ...

Screw hex HD 3/8" UNC x 1-1/4"

Hex-head screw, 1/4" UNF thread, 3/4" long. Unified Fine (UNF) thread form with a hexagonal head for use with standard imperial spanners and socke...

Hex-head bolt, 1/4" UNF thread, 7/8" long. Unified Fine (UNF) thread form with a hexagonal head for use with standard imperial spanners and socket...

Hex-head bolt, 5/16" UNF thread, 1" long. Unified Fine (UNF) thread form with a hexagonal head for use with standard imperial spanners and sockets...

Bolt - a hexagonal-head bolt with a 3/8" UNF (Unified Fine) imperial thread and a 1" length. Used as a suspension and chassis fixing at points such...

Brake Hose - Rear - the flexible rear hydraulic brake hose in the braking circuit, with male unions at both ends. It carries hydraulic pressure ac...

Brake Hose - Rear for ABS-equipped Land Rover Defender models. This flexible rubber hose connects the rigid steel brake pipe at the rear axle to t...

Rear Brake Hose Bracket - mounting bracket that anchors the rear flexible brake hose to the chassis, holding the rigid-pipe-to-hose union in a fixe...

Brake Servo Assembly is the vacuum-assisted brake booster in the braking hydraulic system, mounted between the brake pedal linkage and the master c...

Brake Fluid Reservoir Kit - replacement brake fluid reservoir for the master cylinder. The reservoir mounts on the brake master cylinder and holds...

Brake Master Cylinder Reservoir Cap - the filler cap that seals the top of the brake fluid reservoir on the master cylinder. Incorporates the brak...

Clutch Master Cylinder Reservoir Cap for the clutch hydraulic actuation circuit. Seals the fluid reservoir at the clutch master cylinder, retainin...

Brake Servo Seal - the O-ring that seals the joint between the brake master cylinder and the face of the vacuum servo in the hydraulic braking circ...

Major Service Kit for the 2.5L naturally aspirated and 2.5L turbo diesel (19J) engines, grouping the filtration and sump sealing items renewed at a...

Service Filter Kit for the 200 TDi 2.5L turbo diesel engine, grouping the filters and sealing washers required for a routine engine service under a...

Service Filter Kit for the 300 Tdi 2.5L turbo diesel engine, grouping the consumable filters and sealing washers required for a routine engine serv...

Major Service Kit for the 2.5L Td5 engine, containing the filtration and service consumables for a full scheduled service. Kit contents: 1 x oil f...

Service Kit - 300TDi for Land Rover Discovery 1 and Range Rover Classic with the 300Tdi 2.5L turbodiesel engine. This kit consolidates the key ser...

Filter Kit - 2.2 & 2.4 TDCi for the Land Rover Defender with the Puma TDCi diesel engine. This kit consolidates the main filter and sealing it...

Screw used as a securing fastener in the pedal box area and in brake pipe routing. This screw retains the cover plate at the top of the pedal box,...

Rear Brake Caliper, right-hand side, for the rear braking circuit on models fitted with solid (non-vented) rear discs. The caliper clamps the brake...

Rear Brake Caliper for the left-hand side of the rear axle, part of the hydraulic braking circuit. The caliper carries the hydraulic pistons that ...

Brake Caliper for the rear braking assembly, mounted on the left-hand side. The caliper houses the piston and hydraulic fluid inlet, converting pr...

Rear axle right-hand brake caliper assembly used within the rear brake discs and calipers system. This component forms part of the hydraulic brak...

Brake Caliper Bleed Screw - the bleed nipple that threads into the brake caliper. Backing the screw off releases trapped air and old fluid from th...

Brake Caliper Repair Kit for the rear brake caliper assembly - a piston seal kit for renewing the caliper's hydraulic sealing at the piston bore. ...

Rear Handbrake Cable for the transmission (driveline) parking brake. It runs from the handbrake lever to the drum brake mounted at the rear of the ...

ABS Wheel Speed Sensor - Front for the 4-wheel ABS braking system. Mounted at the front axle, the sensor reads a toothed reluctor ring and generat...

ABS Wheel Speed Sensor - Front for the 4-wheel ABS braking system. Mounted at the front axle, the sensor reads a toothed reluctor ring and generat...

Kit ABS sensor rear

ABS Sensor Kit - Rear is part of the four-wheel anti-lock braking system, fitted at the rear axle. Each sensor monitors wheel rotational speed and...

Front ABS wheel speed sensor, part of the anti-lock braking system's wheel speed sensing circuit. The sensor mounts at the front wheel station and...

Piston Assembly for the 2.5L 200 TDi turbo diesel, forming part of the piston and connecting-rod assembly within the cylinder block. The piston tr...

Steering Box Bearing - Manual is a needle bearing fitted inside the manual (non-power-assisted) Gemmer steering box. The bearing supports the sect...