Products

Anti-Roll Bar Bracket - Rear secures the rear anti-roll bar to the chassis, forming part of the rear stabiliser bar mounting. The bracket clamps o...

Heater Hose connecting the heater to the engine coolant pipe, part of the heater pipes and hoses assembly. The hose forms part of the coolant path...

Heater Hose forming part of the engine coolant circuit that supplies the heater matrix. This is the feed hose carrying heated coolant from the eng...

Heater Hose carries engine coolant between the cooling system and the heater matrix, forming part of the cabin heating circuit. Hot coolant is rou...

Heater Hose connecting the heater to the engine coolant pipe, part of the heater pipes and hoses assembly. The hose forms part of the coolant path...

Heater Hose - a coolant hose in the heater circuit, connecting the heater to the engine pipework. It carries engine coolant to and from the heater...

Fan Cowl Clip is a retaining clip in the engine cooling system. It secures the fan cowl - the shroud that channels airflow through the radiator - ...

Exhaust U-Bolt secures a joint in the front section of the exhaust system. The U-bolt clamps over the pipe at a slip joint and, tightened against i...

Snap Ring is a retaining ring that seats into a machined groove to locate a component on a shaft or within a bore, holding it against axial movement.

Pipe seal

Handbrake Carrier Spacer for the handbrake assembly on Series II, IIA, III and Defender 90/110. This spacer fits within the handbrake carrier mech...

Packing Strip fitted between the bulkhead base and the footrest bracket mounting on the chassis of Defender 90/110. This strip provides the correc...

Wheel Nut for alloy wheel fitment on Defender, Discovery 1 and Range Rover Classic. This tapered-seat wheel nut is designed for use with alloy whe...

Tailgate Hinge Bracket Cover - trim cover for the rear tailgate hinge bracket. The cover fits over the tailgate hinge bracket, concealing and prot...

Foam Dunlop Washer

Fuel Pipe - Accumulator To Filter is a formed rigid fuel line in the V8 fuel injection supply circuit. It carries pressurised fuel from the outlet...

Fuel Pipe - Tap to Tank - a fuel line in the low-pressure diesel supply circuit, running between the fuel tank and the fuel tap. It carries fuel f...

Exhaust Pipe Finisher is the outlet section at the tail end of the exhaust system, fitted to the rear of the tailpipe. It forms the visible exit o...

Power Assisted Steering Hose for the hydraulic power steering circuit, specific to left-hand drive applications. This pipe forms the return leg of...

Saddle Clip for routing and securing the power steering pipes. This saddle-shaped clip clamps the power steering hydraulic pipes to the chassis or...

Hand Throttle Cable is the secondary throttle control cable, operated by a hand control rather than the accelerator pedal. It holds the throttle l...

Fuel Filler Hose for the fuel tank filler assembly. This flexible hose connects the body-mounted filler neck to the fuel tank inlet, carrying fuel...

Fuel Spill Pipe from the fuel tank and pump mounting assembly, used on petrol applications. The spill (return) pipe carries the fuel not consumed ...

Hose - Fuel Feed Defender

Fuel Pipe Union Nut for the fuel delivery line. This female threaded nut draws a fuel pipe up to its mating union, clamping the pipe's flared or c...

Crankshaft Sensor Spacer for the Land Rover Td5 2.5-litre 5-cylinder turbo diesel engine in manual transmission applications. This spacer fits bet...

Locknut is a 1/4" UNF self-locking nut used as a general threaded fastener across the vehicle. Its locking feature resists loosening under vibrati...

Brake Pipe Clip - a single moulded plastic clip that secures a brake pipe to the chassis within the braking hydraulic circuit. It retains the rigi...