Products

LED Light Kit - a Wipac clear-lens LED lamp set that replaces the standard 73 mm exterior lamps with LED units. The kit contains eight lamps plus ...

LED Light Upgrade Kit (coloured lens type) - a complete set of WIPAC 73mm LED lamps replacing the original incandescent front and rear exterior lam...

Front LED light set with smoked lenses, 95mm diameter, supplied as a replacement for the original front lamp units. LED lamp units draw less curre...

LED Light Kit upgrades the exterior lighting to a coloured-lens LED set. It comprises two front sidelights, two front and two rear indicators and t...

LED Light Upgrade Kit (deluxe smoked-lens type, 73mm) - a complete set of WIPAC LED lamps with smoked lenses, replacing the original incandescent f...

Steel Snorkel Kit (raised air intake) from the Mantec range, forming part of the engine air intake system. Relocates the air intake from the stand...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the 8-spoke pattern, finished in white, ET00 offset. The pressed-steel construction withstands of...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the 8-spoke pattern, finished in silver, ET00 offset. The pressed-steel construction withstands o...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the 8-spoke pattern, finished in black, ET00 offset. The pressed-steel construction withstands of...

Steel Road Wheel - 7 x 16 pressed-steel wheel in the modular pattern, finished in white, ET08 offset. The pressed-steel construction withstands of...

Modular Steel Wheel in silver finish, 7 × 16 inch with ET08 offset, for coil-sprung Land Rover models with the standard 5-stud wheel fixing pattern...

Modular Steel Wheel - Black - 7J x 16 A modular steel road wheel finished in black, sized 7J x 16 with an ET08 offset. The steel construction suit...

Static Lap Seat Belt for the second-row seating position, forming part of the interior occupant restraint system. The non-retractable, fixed-lengt...

Static Three-Point Seat Belt for the front seating position, combining a lap strap and a diagonal shoulder strap in a single restraint. This is a ...

Seat Belt - 3-Point Inertia Reel is a lap-and-diagonal front seat belt assembly with a self-locking inertia reel, supplied to the basic Type A spec...

Glow Plug - heater plug for the pre-heat (cold-start) circuit of the 2.5L diesel engine. It threads into the cylinder head so its heating element ...

Cylinder head bolt set for the 2.2L TDCi Duratorq (Puma) diesel, clamping the cylinder head to the block. The head bolts on this engine are angle-...

Cylinder head bolt set for the 2.4L TDCi (Puma) diesel, clamping the cylinder head to the block. The head bolts on this engine are angle-tightened...

Cylinder Head Bolt Kit for the 2.4L Duratorq TDCi turbo diesel engine - the fixings that secure the cylinder head to the cylinder block. The head ...

Gasket Set

Nut - 10/32" UNF A nut with a #10-32 UNF (Unified National Fine) internal thread, run onto a matching UNF bolt or stud to clamp the joint.

Universal Joint for wide-angle propshafts - the cross-and-bearing joint that transmits drive along the propshaft while accommodating the operating ...

Brake Pipe Union for the hydraulic brake system, a male fitting in brass. This union connects a 3/16 inch brake pipe into the brake hydraulic circ...

Blind Brake Union - a male threaded fitting used in the hydraulic brake pipe circuit. The body carries a 3/8"-24 UNF male thread but is solid, wit...

Brake Union for the hydraulic braking circuit, with male 7/16"-20 UNF thread for 1/4" diameter brake pipe. This male-threaded end fitting connects...

Brake Pipe Union for the hydraulic brake system, a female fitting in brass. This union connects a 3/16 inch brake pipe into the brake hydraulic ci...

Brake Union - Blanking Plug, male thread, M10 x 1mm, short body. Used in the metric hydraulic brake circuit to blank off an unused or redundant po...

Brake Pipe Union - a male tube-nut fitting that secures a flared 3/16" (4.75mm) hydraulic pipe end into a female union, T-piece or cylinder port. ...

Brake Pipe Union - a female union fitting for 3/16" (4.75mm) hydraulic brake pipe, with an M10 x 1mm thread. Machined from brass, it threads onto ...

Brake Pipe Union - a female threaded union nut for the brake hydraulic pipework, with a 7/16"-20 UNF thread sized for 1/4" brake pipe. It fastens ...

Brake Union – a threaded fitting in the hydraulic brake circuit that joins and seals brake pipe. Female union with a 7/16"-20 UNF thread, sized fo...

Brake Pipe Union is a male threaded fitting used in the brake hydraulic pipework. It belongs to the brake pipe and fitting group. The union nut th...

Transfer Box - LT230 43D is a reconditioned two-speed transfer gearbox with a 1.4:1 high-range ratio. The transfer box mounts to the rear of the m...

Oil Seal for the LT230 transfer box input shaft. Part of the transfer box gear train. The seal fits around the rotating input shaft where it enter...

Intermediate Shaft for the LT230 transfer box. The intermediate shaft carries the intermediate cluster gear that meshes between the input gear and...

Transfer Box Gear Shaft carrying the high range output gear in the LT230 transfer box high/low gear train. The shaft transmits drive from the inte...

Transfer Box Hi/Lo Switch is a position switch fitted to the LT230 transfer box. It belongs to the transfer box and four-wheel-drive control circui...

High/Low Gear Retaining Nut for the LT230 transfer box. This nut secures the high/low range gear on the transfer box mainshaft, holding it against...

Rubber isolator clamp used in the bonnet-mounted jack bracket assembly to secure the jack beam or handle against the bonnet mounting brackets. The...

Heater Assembly - the complete heater unit of the cabin heating and ventilation system, for diesel applications. The assembly mounts on the bulkhe...

Air Conditioning Control Assembly - the facia-mounted control panel of the heating, ventilation and air conditioning system. It carries the temper...

Heater Control - the heater and air-conditioning control panel mounted in the centre of the dashboard. It carries the rotary controls for cabin te...

Heater Blower Motor and Fan Assembly - the powered fan unit of the cabin heating, ventilation and demisting system. The electric motor drives the ...

Heater Resistor Pack controls the heater blower motor fan speed within the HVAC system, on models with air conditioning. Wired into the blower mot...

Heater Resistor Pack controls the heater blower motor fan speed within the blower assembly of the HVAC system. Wired into the blower motor circuit...

Heater Resistor Pack controls the heater blower motor fan speed within the blower assembly of the HVAC system. Wired into the blower motor circuit...

Heater Control Assembly - the facia-mounted control panel of the cabin heating and ventilation system. It carries the temperature, air distributio...