Products

Rear coil spring seat for the chassis, the upper seat that locates and supports the top of the rear coil spring at the chassis outrigger. The seat...

Front Floor Panel is a footwell floor repair section for the body's front floor assembly. It replaces the corroded or damaged front floor panel on...

Front Floor Panel is a footwell floor repair section for the body's front floor assembly. It replaces the corroded or damaged front floor panel on...

Door Pillar Bracket for the right-hand (offside) bulkhead door pillar, supplied as the bottom bracket only (less the pillar). The bracket forms th...

Rear Crossmember, Heavy-Duty, pressed from 3mm steel and supplied with 200mm side extensions. The rear crossmember closes the back of the chassis ...

Sill Protector is an aluminium protective panel for the body sill (rocker) beneath the doors. It fits over the sill to shield it from stone chips,...

Winch Bumper for the Land Rover Defender, in the non-air conditioning configuration. The bumper replaces the standard front bumper assembly and in...

Rocksliders Barbarian - Defender 130

Centrifuge Oil Drain Pipe Gasket for the Td5 2.5L 5-cylinder turbo diesel engine. Seals the oil drain pipe at the engine's centrifugal oil cleaner...

Flywheel Timing Pin - an engine timing tool for 4-cylinder diesel engines that locks the flywheel at top dead centre (TDC) so the crankshaft is hel...

Flywheel Timing Pin is a workshop special tool used to lock the flywheel in its reference position when setting the diesel injection pump timing on...

Crankshaft Damper Remover is a workshop special tool used to draw the crankshaft vibration damper (torsional damper pulley) off the crankshaft nose...

LT77 Five-Speed Manual Gearbox, build specification 54A, supplied as a reconditioned unit. The LT77 is a five-speed all-synchromesh manual gearbox...

Lamp Boot - Military is a rubber protective boot for military-specification lamp assemblies. The boot fits over the lamp body to provide a weather...

Oil Filler Seal seals the oil filler cap against the filler neck on the camshaft (rocker) cover. It sits between the cap and the cover opening, ke...

Rear Crankshaft Oil Seal seated in the crankshaft rear oil seal housing at the back of the cylinder block, sealing the point where the crankshaft e...

Crankshaft Oil Seal - Rear for the rear crankshaft oil sealing assembly of the 300 TDi engine. Seated in the rear crankshaft seal housing at the f...

Crankshaft Oil Seal - Rear - Heavy Duty for the rear crankshaft oil sealing assembly of the 300 TDi engine. Seated in the rear crankshaft seal hou...

Head Gasket for the Td5 2.5L 5-cylinder turbo diesel engine, sealing the joint between the cylinder head and the cylinder block. It seals the comb...

Head Gasket for the Td5 2.5L 5-cylinder turbo diesel engine, sealing the joint between the cylinder head and the cylinder block. It seals the comb...

Cylinder Head Gasket for the Rover V8 petrol engine, sealing the joint between one cylinder head and the engine block. It seals the combustion cha...

Cylinder Head Gasket for the 300TDi 2.5L four-cylinder turbo diesel engine, sealing the joint between the cylinder head and the engine block. It s...

Sump Gasket for the 2.0L MPI T-Series 4-cylinder 16-valve petrol engine, sealing the oil sump to the underside of the cylinder block. It forms the...

Oil Filter Housing Gasket for the Td5 2.5L five-cylinder turbo diesel engine, sealing the oil filter housing/adaptor to the cylinder block. It sea...

Cam Cover Bolt for the Td5 2.5L 5-cylinder turbo diesel engine, securing the camshaft cover to the cylinder head. This is the flanged-head bolt th...

Crankshaft Pulley Bolt for the Td5 2.5L five-cylinder turbo diesel engine, securing the crankshaft pulley and torsional vibration damper to the nos...

Rocker Shaft Bolt for the Td5 2.5L 5-cylinder turbo diesel engine, securing the rocker shaft assembly to the cylinder head. It clamps the rocker s...

Oil Pump Bolt for the Td5 2.5L 5-cylinder turbo diesel engine, securing the oil pump to its mounting on the engine. It clamps the pump body agains...

Oil seal camshaft OEM for : Cylinder Head 2.0L 4 Cyl MPi T Series Petrol and L-series 2.0L 8V Diesel) - Discovery1 2.0 MPi 4 cyl. petrol, - Defen...

Hex Nut - M8 is a standard six-sided metric threaded fastener with an 8 mm nominal thread diameter. It threads onto a matching M8 bolt or stud to ...

Spring Washer, M8, a split ring washer used with M8 bolts and nuts to prevent fastener loosening caused by vibration and cyclical loading. The spl...

Injector Clamp Bolt for the Td5 2.5L 5-cylinder turbo diesel engine. It secures the injector clamp to the cylinder head, holding the fuel injector ...

Crankshaft Main Bearing Set for the 2.2 TDCi / 2.4 TDCi Duratorq (Puma) diesel engine, forming part of the crankshaft and main bearing assembly. T...

Crankshaft Main Bearing Set for the 2.2 TDCi / 2.4 TDCi Duratorq (Puma) diesel engine, forming part of the crankshaft and main bearing assembly. T...

Crankshaft Main Bearing Set for the 2.2 TDCi / 2.4 TDCi Duratorq (Puma) diesel engine, forming part of the crankshaft and main bearing assembly. T...

Air flow meter TD5 OEM VDO /Delphi

Temp Sensor

Manifold Absolute Pressure (MAP) Sensor for the engine management air intake system, mounted on the inlet manifold. The sensor measures absolute p...