Products

Idler Pulley - a smooth-faced guide pulley in the V8 auxiliary (serpentine) drive belt system. Mounted on a fixed pivot, it routes the accessory d...

V-Belt

Auxiliary Drive Belt for the front-end accessory drive system, transmitting drive from the crankshaft pulley to the alternator and other engine anc...

V-Belt

Plastic Clip for the radiator and fan cowl assembly. The clip locates the cowl to the radiator and retains the surrounding cooling system trim, ho...

Quarter-Turn Fastener for the radiator and cooling system assembly. This fastener secures a panel or component at the radiator with a quick quarte...

O-Ring for the power steering hydraulic circuit, sealing a connection within the pressurised steering fluid system. This is the green, thin-sectio...

O-Ring for the power steering hydraulic circuit, sealing the low-pressure pipe connection to the power steering box. This is the green, thick-sect...

O-Ring for the power steering hydraulic circuit, sealing the low-pressure pipe connection to the power steering box. This is the green, thick-sect...

O-Ring for the power steering hydraulic circuit, sealing a connection within the pressurised steering fluid system. This is the brown, thick-secti...

O-Ring for the power steering hydraulic circuit, sealing a connection within the pressurised steering fluid system. This is the brown, thick-secti...

O-Ring for the power steering hydraulic circuit, sealing the high-pressure pipe connection to the power steering box. This is the brown, thin-sect...

Power Steering Hose from the power-assisted steering hydraulic circuit, for right-hand-drive applications. It routes pressurised hydraulic fluid t...

Power Steering Pipe is the high-pressure delivery line of the power steering hydraulic circuit, carrying pressurised fluid from the pump to the ste...

Steering Damper - Discovery 2

Drop Arm - Steering Box Output is installed on the steering box sector shaft within the power-assisted steering assembly. This component converts ...

Horn Switch mounts in the steering wheel and operates the vehicle's horn. Pressing the switch closes the horn circuit to sound the horn. Supplied ...

Panhard Rod Bush from the front suspension's lateral location linkage. The Panhard rod controls sideways movement of the axle relative to the body...

Hex Nut, M24 x 1.5mm securing the constant-velocity (CV) joint stub shaft to the wheel hub within the driveline. The nut retains the CV joint and ...

Watts Roller Bearing is the centre roller bearing of the rear Watt's linkage, the mechanism that locates the rear axle laterally. It forms the cen...

Watts Linkage Bush for the rear Watts linkage. The Watts linkage locates the rear axle laterally, keeping it centred as the suspension moves throug...

Shock Absorber - Rear is a hydraulic damper in the rear suspension, mounting between the axle and the chassis. It damps oscillation of the rear co...

Air Suspension Compressor Intake Pipe forms the intake side of the air suspension compressor assembly within the self-levelling rear suspension sys...

O-Ring for the ZF automatic gearbox oil pump, sealing the pump housing within the gearbox casing. The ZF oil pump is an internally-driven unit tha...

Corner Fixing Plate - pressed retaining plate for the automatic transmission sump pan, corner position. The sump pan on the ZF four-speed automati...

Hexagonal Screw - sump pan retaining screw for the ZF four-speed automatic transmission. The screw passes through one of the pressed retaining pla...

Body Rivet - a mechanical fastener used within the body and panel assembly to join thin sheet metal, trim and stowage fittings. Nominal size 3/16"...

Shock Absorber Washer Retaining washer for the rear shock absorber lower mounting. Part of the rear suspension assembly, it locates over the lower...

Bolt Secures the radius arm to the axle bracket within the radius arms & links assembly. Installed through the radius arm bush and axle mounti...

Pan Head Bolt, M8 x 40mm. Metric pan head bolt for use across Land Rover body, chassis, and interior assemblies.

Rear Brake Pad Set for the rear disc brakes, supplied as an axle set covering both rear wheels. The friction pads are clamped against the rear bra...

Brake Pipe Clip - Rear secures the rear brake pipes on the Discovery 2, holding the hydraulic lines in place along the chassis. The clip prevents ...

Bolt - a hexagonal-head bolt with a 5/16" UNC (Unified Coarse) imperial thread and a 3/4" length. Used as an engine-assembly fixing, including cams...

Brake Servo Vacuum Hose - moulded hose assembly in the brake vacuum circuit. The hose carries manifold depression from the inlet manifold to the b...

Brake Vacuum Hose for the brake servo vacuum supply circuit on the Td5 2.5L 5-cylinder turbo diesel. The hose carries vacuum from the engine vacuu...

Headlamp Bulb Cover for the front headlamp assembly. This rubber cover seals the bulb access aperture at the rear of the headlamp unit following b...