Products

Turbocharger Circlip - retaining clip for the turbocharger actuator on diesel turbocharger installations. It secures the actuator rod to the contr...

Bonnet Gas Strut a gas-filled telescopic support for the bonnet. It counterbalances the weight of the bonnet, assisting opening and holding it sec...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Fuel Injection Pump

Water pump 2.7ltr TDV6 OEM

Oil filter housing assembly for the 2.7 V6 turbo diesel, incorporating the engine oil cooler and the fuel cooler in a single casting. The housing ...

Fuel Filter Element for the diesel fuel supply system. The element removes particulate contamination and separates water from the fuel before it re...

Cylinder Head Gasket - Grade 3 for the 2.7L TDV6 diesel engine. Seals the joint between the cylinder head and the engine block, containing combust...

Fuel pressure regulator BMW Diesel OEM BOSCH

Regulator - Fuel Pressure

Sensor - Crankshaft Position - C

Screw - M5 x 20 mm fixing screw used to secure the front and rear wheel arch mouldings and the adjoining rear bumper section to the bodywork. A bo...

Outside Door Moulding - RH is the right-hand exterior door moulding, a partially painted plastic trim fitted to the outer face of the door. It pro...

Steering Tie Rod Repair Kit - renews the track rod (tie rod) link within the steering gear. Reconnects the steering linkage to the wheel hub, with...

Steering Tie Rod Repair Kit - renews the track rod (tie rod) link within the steering gear. Reconnects the steering linkage to the wheel hub, with...

Kit - Tie Rod Repair M20/M12

Track Rod End - the outer ball joint that connects the track rod to the steering knuckle. Transmits steering movement from the track rod to the wh...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

Crankshaft Front Oil Seal seals the front of the crankshaft where it passes through the timing cover, behind the crankshaft pulley. It retains eng...

Crankshaft Front Oil Seal seals the front of the crankshaft where it passes through the timing cover, behind the crankshaft pulley. It retains eng...

Gasket - Oil Filter to Block seals the joint between the oil filter housing and the cylinder block, within the Oil Cooler and Filter assembly. It ...

Oil Cooler Assembly - the oil-to-coolant heat exchanger of the engine's Oil Cooler and Filter assembly. Engine coolant is passed through the coole...

Exhaust Manifold Gasket - right-hand side seals the exhaust manifold against the cylinder head face on the right-hand bank of the engine. It conta...

Exhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

Fuel Pump O-Ring Seal, 31mm x 2mm - the sealing ring at the fuel pump / fuel injection pump joint. This O-ring is the only seal at that joint, so ...

Headlight Switch is the dashboard rotary lighting switch mounted in the facia lighting panel. It switches the side, dip and main-beam lighting cir...

Inlet Manifold Gasket - seals the inlet manifold to the cylinder head on the 5.0L V8 AJ133 naturally aspirated petrol engine. The gasket closes th...

Connection - Water Outlet

Screw, M6 x 38mm, from the timing gear assembly - timing chains, tensioners and guides, and the auxiliary drive. It retains the chain guide in pos...

O-Ring for the oil pump inlet tube, part of the oil pump, sump and filter assembly. It seals the joint at the oil pump inlet (pick-up) tube, keepi...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...

O-Ring for the oil pump outlet tube, sealing the pressurised feed within the oil pump, sump and filter assembly. The outlet tube carries oil from ...

Starter Motor - the pre-engaged starter that cranks the engine, bolted to the bellhousing face at the engine-to-gearbox joint. The integral soleno...

Oil Filter for the engine lubrication system. It removes contaminants from the engine oil as it circulates, protecting the bearings and moving par...

Belt Drive Sce. 5.0sc

Lambda Sensor (heated exhaust gas oxygen sensor) fitted upstream of the catalytic converter on the 5.0 litre V8 petrol engine (AJ133), in both natu...