Products

24v dsl long belt

Coolant Temperature Sensor in the engine cooling circuit. This sensor monitors coolant temperature and transmits a signal to the engine management...

Washer Non-Return Valve for the windscreen wash/wipe system. The valve is fitted into the washer fluid line between the pump and the jets. It perm...

Door Handle Cover that caps the exterior door handle at the door lock control, finishing the handle assembly. Supplied in black, this is the blank...

Clip for the headlamp washer system. Retains the headlamp washer jet to the bumper.

Finisher Clip - a retaining clip for exterior body finishers and mouldings. The clip secures a trim finisher or moulding to the body panel, engagi...

Bumper Retainer A quarter-turn click-type fastener that secures the bumper and radiator grille panels to the body. It locates through the mounting ...

Stud

Moulding is a body trim moulding, a shaped strip fitted to the vehicle that provides a finished edge and protects the panel or aperture it follows.

Bolt Mounting bolt for the power steering pump and front cover housing, and for air conditioning compressor and condenser mountings.

Flanged Nyloc Nut, M10, a multi-purpose locking fastener used across the chassis and suspension. The nylon insert resists loosening under vibratio...

Seat Back Adjustment Handle - the operating handle for the front seat backrest recline mechanism, mounted on the outboard side of the seat frame. ...

Bolt - M10 x 25 mm, with washer. Underbody and chassis fixing used to secure engine splash shields, heat shields and underbody protection panels t...

Radiator Cap - screw-on pressure cap for the coolant expansion tank in the engine cooling system. The cap seals the expansion tank and holds the c...

Hex-Head Bolt and Washer - bolt and washer assembly used in the front suspension and subframe area. The fastener secures front cross member, stabi...

Sump Plug Washer for the 3.2L DOHC MPI petrol inline-six engine. This sealing washer fits under the sump drain plug to seal the oil pan drain threa...

Anti-Roll Bar Bush for the suspension stabiliser system. This rubber insulator clamps the anti-roll bar to its mounting, locating the bar while all...

Crankshaft Position Sensor - engine management sensor located at the crankshaft, reading a toothed reluctor ring driven by the crankshaft. The sen...

Indicator Bulb - PY21W amber signal bulb, 12V 21W, fitted to the direction indicator lamp units. The amber envelope provides the signal colour req...

Sealing Ring - oil seal at the input of the AWF21 six-speed automatic transmission, sealing around the torque converter hub where it enters the tra...

Radiator Hose - upper radiator hose in the engine cooling circuit. Connects the engine coolant outlet to the top inlet of the radiator, forming th...

Coolant Hose - bottom expansion tank hose in the engine cooling circuit. Runs from the lower outlet of the coolant expansion (supply) tank to the ...

Coolant Hose Assembly - heater outlet to thermostat housing hose in the engine cooling circuit. Returns coolant from the heater matrix outlet to t...

Coolant Hose from the EGR cooler to the heater inlet, part of the engine cooling and exhaust gas recirculation circuit. The EGR cooler is coolant-...

Coolant Hose between the radiator and the coolant expansion tank. This is the overflow connection of the cooling system: coolant displaced from th...

Exhaust Gasket for the flanged joint between the exhaust front pipe and the catalyst section. It seals the bolted flange where the front pipe meet...

EGR Cooler for the 2.2L DOHC DW12 turbo diesel engine, part of the exhaust gas recirculation circuit. The cooler is a coolant-fed heat exchanger: ...

ABS Speed Sensor for the rear wheel, part of the anti-lock braking system. The sensor measures rear wheel rotational speed and feeds the ABS contr...

Bolt for the adjustable rear suspension arm on the Freelander 2 and Range Rover Evoque. This M14 × 85mm special bolt secures the adjustable rear a...

Rear suspension bump stop - part of the rear damper and coil spring assembly. The moulded rubber bump stop fits over the shock absorber piston rod...

Parking brake operating lever (shoe expander) for the rear drum-in-disc parking brake assembly. The lever is mounted to the parking brake shoe and...

Oil Filter - engine oil filter element for the 2.2L Td4 diesel engine, supplied with its sealing ring. The element fits inside the filter housing ...

Glow Plug for the 2.2L Td4 diesel engine. Fitted to the cylinder head, it pre-heats the combustion chamber to aid cold starting and is controlled ...

Thermostat Housing - coolant outlet housing in the engine cooling circuit of the 2.2L Td4 diesel engine. The housing mounts to the engine and carr...

Fuel Filter for the diesel fuel supply system of the 2.2L DW12 common-rail direct-injection turbo diesel engine. It is fitted in the fuel line betw...

Fuel Filter - diesel fuel filter for the 2.2L Td4 engine, fitted in the low-pressure fuel supply circuit. The filter sits between the fuel tank an...