Products

Oil Drain Plug threads into the drain port at the base of the engine sump, sealing the oil pan against leakage during operation. It sits within the...

Inlet Valve for the cylinder head valvetrain on 2.7, 3.0 TDV6 and 3.6, 4.4 TDV8 diesel engines. The inlet valve seats in the cylinder head and con...

Valve Stem Seal for the cylinder head valvetrain on TDV6 and TDV8 diesel engines. Fitted to both inlet and exhaust valves, the seal presses onto th...

Camshaft Seal for the TDV6 2.7L V6 diesel engine. Seals the camshaft at its exit point from the cylinder head, preventing oil leakage from the cams...

Oil Pump Gasket for the engine lubrication system on Td6 2.7 and 3.0 diesel engines. The gasket seals the oil pump housing to the engine block, pre...

Throttle Body Housing Seal seals the rear interface of the throttle body housing where it mates with the adjoining intake ducting, within the engin...

Cylinder Head Bolt for the cylinder head assembly on TDV6 and TDV8 diesel engines. The bolt secures the cylinder head to the engine block, clamping...

Exhaust Manifold Gasket for the TDV6 2.7L and 3.0L diesel engine. This gasket seals the joint between the exhaust manifold and the cylinder head. ...

Valve Rocker Arm for TDV6 and TDV8 diesel engines. This component operates within the cylinder head valve train, transmitting motion from the cams...

Oil Separator Seal - sealing gasket for the oil separator in the crankcase ventilation system of the 2.7 and 3.0 litre V6 diesel engines. The oil ...

Injector Retaining Bolt - M6 x 35 mm clamp bolt in the fuel injection system of the V6 and V8 diesel engines. The bolt secures the injector hold-d...

Cap Fuel Rrsport, Rrevo - Discovery 3, Discovery 4

Battery - Wet Non-Spillable for the vehicle electrical system. It is a flooded (wet) lead-acid battery of sealed, non-spillable construction. It su...

Dust Cap is the small protective cover that fits over a hydraulic bleed nipple in the braking system. Pushed onto the bleed screw of a brake calip...

Dzus Fastener is a quarter-turn quick-release stud used to secure the radiator cowl and cooling fan shroud within the engine cooling assembly. The...

Mounting Bracket - support bracket in the suspension system. Secures suspension components to the chassis. Used in air suspension and active anti-...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

High-Tensile Hexagon-Head Bolt - an imperial 7/16" UNF fixing bolt, 2-1/2" long, in high-tensile grade. A general-purpose hex-head fastener with a...

Panhard Rod Bolt with a 1/2" UNF (Unified National Fine) imperial thread and a 3-1/4" shank length, manufactured to a high-tensile grade. Secures ...

Firtree Clip - a push-in fastener with a ribbed, fir-tree profile that grips into a pre-drilled panel hole. Used to secure trim panels, wiring loo...

Piston Assembly for the 5.0L supercharged V8 petrol engine, supplied as a single standard-size assembly. Eight are required for a complete engine.

Piston Ring Set for the 4.4 TDV8 diesel engine, supplying the rings for one piston at standard bore size. The set provides the compression and oil...

Kinetic Recovery Rope - vehicle recovery accessory for extracting a bogged or stuck vehicle. Unlike a static strap, a kinetic rope stretches under...

8HP Gearbox Service Kit supplies the components for a complete fluid change on the ZF 8HP70 eight-speed automatic transmission. On this gearbox the...

Steering Column Repair Gaiter is a replacement gaiter for the steering column. It seals the steering column and is supplied as a repair item to re...

Gear Shift Module (GSM) Tester is a diagnostic and repair tool for the rotary gear selector module. The plastic fastener inside the GSM is prone to...

Filter Air Panel

Upgrade the rear braking system on your Land Rover with this performance rear brake discs set (pair), featuring a slotted and drilled design. The d...

Rear Brake Disc - vented - for the rear axle braking assembly. The internal vane structure between the two friction faces channels airflow through ...

Ball Joint Separator - a heavy-duty scissor-type hand tool that eases tapered ball joints and track rod ends apart without impact, avoiding damage ...

The Filter Service Kit is designed for the Range Rover L405 3.0 TDV6 Diesel (2013 - 2023) and Range Rover Sport 3.0 V6 Diesel (2014 - 2022) with DP...

Headlamp Washer Pump

Trim Clip (Scrivet) is a two-piece plastic push-fit fastener used to secure trim panels, facia sections, splash shields and other clipped-in compon...

Brake Hose Clip in the brake hydraulic circuit, securing a flexible brake hose to its mounting bracket where the hose crosses from the chassis to a...

Plain Nut - an M10 threaded fastener used at engine and chassis fixing points. Applications include retaining the shock absorber mountings to the ...

Hex Nut - M12 - a standard M12 hexagonal nut used as a general-purpose fastener across the vehicle. The six-sided form is tightened with a standar...

Piston ring set for the 5.0L AJ133 V8 petrol engine, in both naturally aspirated and supercharged form. Part of the cylinder block assembly – cran...

Piston in standard size for the Ingenium AJ200D / 204DTD 2.0L 4-cylinder diesel engine. The piston runs in the cylinder bore and transfers combust...

Piston Ring Set in standard size for the Ingenium AJ200D / 204DTD 2.0L 4-cylinder diesel engine. The rings seal the combustion chamber against the...

Brake Disc for the front axle, internally vented with a cross-drilled and grooved face. Part of the braking system, providing the friction surface...

Brake Discs - Front - Pair for the front disc brake assembly. Each disc bolts to the front wheel hub and rotates with the wheel; the brake caliper ...

Dog guard, upper half - a half-height black mesh barrier that separates the load space from the rear passenger compartment. The guard locates agai...

Enhance your Range Rover L405 (2013-2022) with this 4-piece wind deflector set, designed to reduce wind noise and buffering when driving with the w...

Inlet Manifold Fitting Kit - the seals and gaskets required when the inlet manifold is removed and refitted on the 3.0L TDV6 diesel engine. The ma...