Products

Hood Latch for the bonnet closing mechanism. The latch is body-mounted and engages the bonnet striker to hold the bonnet shut, releasing when the ...

Festoon Bulb for interior lamps. A double-ended festoon bulb that locates between the sprung contacts of the courtesy, map and interior lamp housi...

Dust Cap is the small protective cover that fits over a hydraulic bleed nipple in the braking system. Pushed onto the bleed screw of a brake calip...

Rear Anti-Roll Bar Link connects the rear anti-roll bar (stabiliser bar) to the suspension. The link transfers load between the anti-roll bar and ...

LED Driving Light - round auxiliary driving light with a 4" (100mm) diameter housing and 50W LED output. Intended for external mounting as a suppl...

Oil Filter Combination Spanner is a service tool for the cartridge oil filter housing, sized 27mm to fit the filter cap. It engages the 27mm cap o...

Capture the sleek design of the Range Rover Evoque with this premium 1:76 scale diecast model in elegant Baltic Blue. This detailed replica perfect...

Kinetic Recovery Rope - vehicle recovery accessory for extracting a bogged or stuck vehicle. Unlike a static strap, a kinetic rope stretches under...

Piston - 0.50 mm Oversize for the 2.0-litre Ingenium (AJ200D / 204DTD) diesel engine. An engine-rebuild piston machined 0.50 mm over the standard ...

This Filter Service Kit is designed for the 2.2 Diesel engine in Discovery Sport and Range Rover Evoque models equipped with a Diesel Particulate F...

Brake Hose Clip in the brake hydraulic circuit, securing a flexible brake hose to its mounting bracket where the hose crosses from the chassis to a...

Hex Nut - M12 - a standard M12 hexagonal nut used as a general-purpose fastener across the vehicle. The six-sided form is tightened with a standar...

DA1216HD Freelander 2 (4WD): fits All 4WD Freelander2 Range Rover Evoque (Early/Haldex): Efficient Driveline (Haldex) Evoque tot DH999999 (or EH000...

Die-cast scale model of the Range Rover Evoque Coupé (2-door) in white, at 1:24 scale. Finished in die-cast metal with a detailed interior and ope...

Piston in standard size for the Ingenium AJ200D / 204DTD 2.0L 4-cylinder diesel engine. The piston runs in the cylinder bore and transfers combust...

Piston Ring Set in standard size for the Ingenium AJ200D / 204DTD 2.0L 4-cylinder diesel engine. The rings seal the combustion chamber against the...

Connecting Rod for the Ingenium 2.0L engine (AJ200 / AJ204) in the 180 hp output variant. The connecting rod links the piston gudgeon pin to the c...

Connecting Rod for the Ingenium 2.0L engine (AJ200 / AJ204) in the 240 hp output variant. The connecting rod links the piston gudgeon pin to the c...

Gasket - 2.0tcie Head No Set-H

Portable Jump Starter and Air Compressor - a handheld 12V power pack combining a battery jump starter, power bank, tyre inflator and LED work light...

Cap - Expansion Tank

EGR Valve Gasket

Wheel Nut for securing an alloy road wheel to the hub. It threads onto the wheel stud and clamps the wheel against the hub mounting face, providing...

Wheel Nut with a black finish, for securing a road wheel to the hub. It threads onto the wheel stud and clamps the wheel against the hub mounting f...

Front Axle Output Seal - RH Outer - the outer oil seal on the right-hand output of the front axle case. It seals around the differential output fl...

Air Conditioning O-Ring, 13.7 x 2.5mm, for the R134a refrigerant circuit. It seals a line connection in the front air-conditioning system on the c...

Axle Case Seal - Front seals the front axle case (final drive housing) around the driveshaft where it passes through the case. It retains the diff...

Disc Brake Front Frl2, Evoque

Front spring pad for the front suspension strut and coil spring assembly. The pad is an elastomer insulator that seats between the end of the coil...

Clutch slave cylinder assembly

Brake Caliper Guide Pin Dust Cover for the front and rear brake calipers. The boot fits over the caliper guide pin and seals against the carrier b...

Locking Flange Nut - M8 for fastening applications requiring vibration-resistant fixings. A prevailing-torque hexagonal nut with an integral flang...

Mass Air Flow (MAF) Sensor mounted in the air intake tract, downstream of the air cleaner. It measures the mass of air drawn into the engine and s...

Rear LH height sensor

Clutch Slave Cylinder Assembly Concentric (hydraulic) clutch slave cylinder for the six-speed manual gearbox. Mounted concentrically around the ge...

Ride Height Sensor for the front right-hand corner of the air suspension system. The sensor mounts between the body and a suspension link, and mea...

Starter Motor Puma Replacement - Defender

Air Filter element for the engine air intake system. Fitted within the air filter housing, the element removes airborne dust and particulate matte...

Oil Filter Adaptor for the rear-drive Haldex coupling (Active On-Demand Coupling) in the all-wheel-drive driveline. The filter keeps the oil in th...

Parking Sensor is an ultrasonic sensor for the Park Distance Control (parking aid) system. Mounted in the bumper, it emits and receives ultrasonic...

Oil Filter Element and Seal

Oil Drain Plug for the engine oil pan (sump). Threaded into the base of the oil pan, it seals the oil drain point and is removed to drain the engi...

Bolt securing the fuel injector and high-pressure fuel pipe assembly on the engine fuel system. It clamps the injector and high-pressure pipe unio...