Products

Exhaust Valve for the cylinder head valvetrain. It seals the combustion chamber against the exhaust port and opens to release spent gases into the ...

Hose water outlet cylinderhead / thermostat housing 3.6L TDV8

Throttle Housing Seal for the 2.7L TDV6 and 3.0L SDV6 diesel engines, sealing the throttle body to the air intake. The seal sits between the throt...

Water Pump - coolant pump for the 3.6L V8 TDV8 (Lion) diesel engine. Driven from the engine, it circulates coolant through the block, cylinder hea...

Radiator for the engine cooling system of the 4.2L V8 supercharged petrol engine. The main coolant-to-air heat exchanger, mounted in the cooling p...

Bonnet Gas Strut a gas-filled telescopic support for the bonnet. It counterbalances the weight of the bonnet, assisting opening and holding it sec...

Pump - Water

O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...

Water Outlet Connection - the coolant outlet housing on the 2.7L V6 diesel engine, incorporating the thermostat that controls coolant flow to the r...

Cooler Assembly - Fuel No Gasket

Fuel Filter Element for the diesel fuel supply system. The element removes particulate contamination and separates water from the fuel before it re...

Cylinder Head Gasket - Grade 2 for the 2.7L TDV6 diesel engine. Seals the joint between the cylinder head and the engine block, containing combust...

Cylinder Head Gasket - Grade 5 for the 2.7L TDV6 diesel engine. Seals the joint between the cylinder head and the engine block, containing combust...

Sensor - Crankshaft Position - CPS

Fuel filter assy TDV6 Replacement

Steering Rack Ball Joint Repair Kit for renewing the tie rod (track rod) joints at the steering rack. The kit rebuilds the connection between the ...

Steering rack ball joint repair kit - M12 ball joints, steering gear and track rod linkage. The kit renews the outer connection between the steeri...

Track Rod End RRS >9A M12

Outer track rod end - M14 thread, steering gear and track rod linkage. The track rod end threads onto the tie rod and its ball joint connects the ...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

Exhaust Valve for the cylinder head of the 5.0L V8 petrol engine (AJ133), naturally aspirated and supercharged. It seals the exhaust port against ...

Kit - Tension Pulley

Oil Cooler Assembly - the oil-to-coolant heat exchanger of the engine's Oil Cooler and Filter assembly. Engine coolant is passed through the coole...

Gasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...

Cam Cover Gasket seals the left-bank camshaft cover to the cylinder head on the 5.0L V8 (AJ133) petrol engine. It forms the oil-tight joint around...

O-Ring - Radiator Hose

Inlet Valve - cylinder head inlet (induction) valve for the 5.0L V8 AJ133 supercharged petrol engine. The inlet valve admits the intake charge int...

Cam Cover Gasket seals the right-bank camshaft cover to the cylinder head on the 5.0L V8 (AJ133) petrol engine. It forms the oil-tight joint aroun...

Connector

Spark Plug Well Gasket seals the spark plug aperture in the camshaft (valve) cover on the right-hand cylinder head bank. It prevents engine oil fr...

Intercooler to Inlet Manifold Gasket from the charge air induction system of the supercharged 5.0L V8 petrol engine (AJ133). The supercharger and ...

Inlet Manifold Gasket - 5.0 V8 - RH seals the inlet manifold to the cylinder head on the right-hand bank of the 5.0 litre V8 petrol (AJ133) engine,...

Inlet Manifold Gasket for the left-hand cylinder bank of the 5.0 litre V8 petrol engine (AJ133). It seals the joint between the inlet manifold and ...

O-ring for the variable valve timing (VVT) solenoid, part of the timing gear assembly at the front of the engine. The solenoid meters oil flow to ...

Gear Selector Lever - lever that clamps to the manual selector shaft on the six-speed ZF automatic transmission, forming the gearbox end of the flo...

Fuel Injector Seal - Lower is the lower sealing ring fitted to the fuel injector, within the fuel injector and pipe assembly of the 4.4L V8 (AJ) pe...

Retainer Clip - a quarter-turn, click-type fastener used to secure bumper trim and adjacent body panels to the vehicle body. The clip is fitted wi...

Parcel Shelf Catch Clip is the retaining catch for the load compartment cover (parcel shelf), part of the loadspace trim assembly. Supplied in an e...

o-ring oil cooler 3,0 TDV6

O-Ring sealing the oil cooler and filter housing on the 3.0L V6 diesel engine. Positioned at the mating interface between the oil cooler assembly ...

Oil Cooler O-Ring for the engine oil cooler and filter housing assembly. The Ø 9.5mm O-ring seals the oil-carrying joint between the engine block a...

Water Pump for the engine cooling circuit on the 3.0L V6 diesel engine. This pump circulates coolant through the engine block, cylinder heads, and...

Oil Tube Gasket for the 3.0L V6 diesel engine. This sealing gasket forms a leak-free joint at an oil tube connection within the engine lubrication...

Oil Return Hose Gasket for the 3.0L TDV6 diesel engine. This gasket seals the oil return hose connection at the turbocharger, forming a leak-free ...

Camshaft Position Sensor within the engine management system of the 3.0L diesel engine. This sensor monitors camshaft rotational position and tran...

Crankcase Breather Pipe for the 3.0L V6 diesel, part of the crankcase ventilation circuit within the engine emission control system. The pipe conn...