Products

Inlet Manifold Stud with a UNF thread. Threads into the cylinder head to mount the inlet manifold, taking the manifold nut that clamps the manifol...

Oil Filler Cap Assembly for the rocker (valve) cover of the 2.25L 4-cylinder petrol engine. The cap seals the oil filler neck and incorporates an i...

Coolant Bypass Hose - 2.25 Petrol is the short coolant hose forming the thermostat bypass circuit in the 2.25L Petrol engine cooling system. When ...

Front Cover Spacer for the 2.25-litre four-cylinder engine. This spacer block sits between the timing pointer and the front (timing) cover, settin...

Brake Light Switch for the pedal box. It closes the stop-lamp circuit when the brake pedal is applied, switching on the brake lights. Used on brak...

Lead

Headlamp Switch Brake 3464

Column Stalk Switch mounted on the steering column, combining three controls in a single stalk: the turn-signal (indicator) switch, the horn push a...

Panhard bush RR >'85

Polyurethane bushes

Fuel Tank for the 3.5L V8 petrol engine. This is the main fuel storage tank, the reservoir of the vehicle's fuel supply system. Mounted to the cha...

Top Link Bracket for the rear suspension, right-hand side. This chassis-mounted bracket provides the upper pivot point for the rear suspension lin...

Top Link Bracket for the rear suspension, left-hand side. This chassis-mounted bracket provides the upper pivot point for the rear suspension link...

Top Coolant Hose for the engine cooling circuit. Carries hot coolant from the engine outlet at the thermostat housing to the top tank of the radia...

Pedal Rubber Pad for the foot pedal. The moulded rubber pad slips over the pedal arm to provide a durable, non-slip foot surface. Fitted to manual...

Ball Joint for the self-levelling suspension strut. Forms the pivoting connection at the end of the self-levelling unit, letting the strut articul...

Radiator for the engine cooling system, serving as the primary heat exchanger that dissipates heat from the coolant circulating through the 3.5L V8...

Wheel Nut, Flat Type secures the road wheel to the hub studs. It has a flat, single-chamfer seating face and a 27mm hexagon.

Clutch Release Fork operates inside the bellhousing as part of the manual transmission clutch release mechanism. Pivoting on its mounting in the c...

Clutch release fork kit used within the manual transmission clutch release mechanism. The release fork operates in the clutch housing and transfers...

Clutch Release Staple is the spring retaining clip that secures the clutch release bearing assembly to the clutch fork, holding the bearing in posi...

Layshaft Bearing for the early-type LT76 gearbox. It supports the layshaft (countershaft) within the gearbox, carrying the cluster gear that trans...

Gear Lever Knob threads onto the top of the main gearbox gear lever to form the hand grip used for gear selection. It gives the driver a defined c...

Bolt - BSF - 1-3/8 in is a British Standard Fine (BSF) hex bolt, 1-3/8 in in length, used as a fastener in the front swivel pin housing, rear axle ...

Clutch Cover (pressure plate assembly) for the clutch on 4-cylinder petrol applications. The cover bolts to the flywheel and houses the diaphragm ...

Swivel pin & bracket

Layshaft for the LT76 four-speed gearbox, Suffix A only. It carries the cluster of layshaft gears below the mainshaft, driven by the constant-mesh ...

Reverse Gear for the LT76 four-speed gearbox, Suffix A only. The reverse idler gear is brought into mesh when reverse is selected, reversing the di...

Clutch Fork Clip secures the clutch arm rod to the release fork inside the gearbox bellhousing on LT77, LT85, and R380 5-speed manual gearboxes. T...

Mainshaft - Series 3

Wheel Stud for the axle hub - 16mm pull-in type. Mounts in the hub flange to carry the road wheel, which is clamped by the wheel nut running on th...

Wheel Hub Assembly - the complete axle hub, supplied with the wheel studs already fitted. It serves both front and rear hub positions. The hub mou...

Brake Drum - 11 in - Large Wheel Studs is a cast iron drum for the drum brake assemblies of Series 3 and Defender models. The drum measures 11 inc...

Front Brake Drum for the front drum brake assembly. It mounts to the front hub and rotates with the wheel; the brake shoes expand outward against ...

Battery Cover is the top fixing frame of the battery securing assembly. It clamps down over the top of the battery and bolts to the battery tray, h...

Grommet - Safety Harness Anchorage

Heater Hose - S Shape carries coolant from the engine to the heater matrix in the Series III cabin heating circuit. The hose has an S-shaped profi...

Radiator Hose - Top - 2.25L Petrol connects the thermostat housing outlet on the 2.25L Petrol engine to the top inlet of the radiator, forming part...

Accelerator Cable for left-hand-drive applications, forming part of the throttle control linkage. The cable connects the accelerator pedal to the ...

Radiator - Copper Core sits in the engine cooling circuit, dissipating heat from the coolant to hold a stable operating temperature under load. Th...

Clutch pipe

Brake Pipe - pre-formed rigid brake pipe forming part of the hydraulic braking circuit. It carries pressurised brake fluid between components of t...

Brake Hose – 1-Ton is the front flexible hose in the front brake hydraulic circuit. It carries fluid from the rigid brake pipe on the chassis to th...

Track Rod Clamp is a split-tube collar that secures the threaded track rod end into the track rod tube on the front steering axle. Once the front ...

Speedometer Cable – LHD is the mechanical drive cable that transmits road speed to the speedometer. The rotating inner core runs inside a protectiv...

Trailer Plug - a 7-pin towing electrics connector. Wired into the towing vehicle's harness, it mates with the trailer or caravan socket to feed th...

Selector Rod Rubber Grommet Washer is the rubber sealing element fitted around the reverse gear selector shaft at its exit point through the Series...