Products

PCV Valve Service Kit

Suspension Arm - front lower arm, rear position, right-hand side. Part of the Front Suspension Lower Control Arm assembly. The arm locates the low...

Suspension Arm - front lower arm, rear position, left-hand side. Part of the Front Suspension Lower Control Arm assembly. The arm locates the lowe...

Coolant outlet tube forming the water outlet connection at the cylinder head, in the engine cooling circuit of the 2.0L I4 AJ200 Ingenium petrol en...

Fuel Vapour Valve (Purge Control Valve) - electrically operated solenoid valve in the evaporative emission control (EVAP) system, for supercharged ...

Purge Control Valve - evaporative emission (EVAP) control system. The valve sits in the line between the activated carbon canister and the engine ...

Coolant Expansion Tank Cap - pressurised filler cap for the coolant expansion and overflow container in the engine cooling system. The cap sets th...

Inlet Manifold - LH

Front Wiper Blade - windscreen wash/wipe system, right-hand drive applications. Clips to the front wiper arm and carries the wiping element across...

Front Wiper Blade - windscreen wash/wipe system, left-hand drive applications. Clips to the front wiper arm and carries the wiping element across ...

Throttle Body and Motor - electronically actuated throttle valve assembly for the engine air intake system, supplied complete with its drive motor....

Coolant Expansion Tank - the pressurised header and overflow reservoir of the engine cooling system. The tank takes up the coolant volume displace...

Primary Accessory Drive Belt for the 5.0L AJ133 supercharged V8 petrol engine, forming part of the front end accessory drive. The multi-ribbed ser...

Gearbox Plug

Window Control Switch - double (twin-element) electric window switch for the door trim switch pack. The switch is mounted in the door casing and p...

Window Control Switch - twin-rocker switch pack for the front driver's door, part of the door trim electrical switch assembly. The unit carries tw...

Heater Pipe - rigid heater manifold tube in the engine coolant circuit of the 5.0L V8 supercharged petrol engine. The pipe carries hot coolant fro...

Water Outlet Connection - lower coolant outlet housing in the engine cooling circuit of the 4.4L TDV8 diesel engine. It bolts to the engine and di...

Collet - Anti-Roll Bar Pipe - retaining collet used in the pipe connections of the Active Cornering Enhancement (ACE) anti-roll bar system. The co...

Clip retaining the top of the rear air spring within the rear spring and shock absorber assembly. The clip locates and secures the air spring at i...

Bolt and Washer - an M8 x 24mm bolt supplied with a washer, used as a general-purpose fixing across several Land Rover assemblies. The washer spre...

Hex Nut is an M6 flange nut with a 10mm hexagonal drive. It retains wheel arch liner and splashguard panels on their mounting studs. The integral ...

Screw - an M6 x 20 mm pan-head setscrew with a Torx drive, used as a general multi-application fastener. The Torx socket gives positive tool engag...

Bolt

Washer - Sealing

External Torx Head Bolt, M8 x 48 mm, for the front propshaft flange. The bolt clamps the front propshaft flange to its mating drive flange. Its ex...

Side Step Fixing Kit

Side step insulator - a moulded pad that sits between the side step mounting bracket and the vehicle body, within the deployable side step mounting...

Side step wiring harness - the electrical loom for a power deployable side step installation. It connects the side step drive motors to the side s...

Rubber floor contour mat set for the front and second-row footwells, part of the interior protection range. The mats are moulded to the contours o...

Rubber Floor Mat Set - moulded rubber footwell mats supplied as a set, covering the front and second-row footwells. The mats sit over the standard...

Gasket - Exhaust Pipe