Products

24v dsl long belt

Key

Front Crankshaft Oil Seal seated in the engine front (timing) cover, sealing the crankshaft nose where it exits the crankcase. The seal runs again...

Valve Stem Seal for the cylinder head valvetrain on TDV6 and TDV8 diesel engines. Fitted to both inlet and exhaust valves, the seal presses onto th...

Oil Filter for the 2.7L TDV6 diesel engine, part of the engine lubrication circuit. A paper-element filter that removes wear particles and contami...

Kit - Drive Belt

Camshaft Seal for the TDV6 2.7L V6 diesel engine. Seals the camshaft at its exit point from the cylinder head, preventing oil leakage from the cams...

Clamp - Tube

Bolt - Exhaust Manifold & EGR - a fixing bolt used in the exhaust manifold and exhaust gas recirculation (EGR) assembly of the TDV6/TDV8 diesel...

Coolant Connecting Tube - rigid coolant transfer pipe located at the thermostat housing within the engine cooling system of the 2.7L TDV6 diesel en...

Timing Chain & Tensioner Kit - Upper

Throttle Body Housing Seal seals the rear interface of the throttle body housing where it mates with the adjoining intake ducting, within the engin...

Camshaft Pulley Hub mounts to the front of the right-hand (RH) cylinder bank camshaft on the 2.7L and 3.0L V6 diesel engine, forming part of the ti...

Oil Tube Gasket seals the turbocharger oil drain (return) pipe where it joins the engine, within the turbocharger lubrication circuit. After lubri...

Exhaust Gasket for the TDV6 2.7L V6 diesel engine. Seals the joint between the exhaust manifold and the cylinder head, preventing exhaust gas leaka...

EGR Outlet Pipe Gasket seals the joint between the EGR outlet pipe and the intake system on the 2.7L TDV6 diesel engine (Lion V6). It sits where r...

Cylinder Head Bolt for the cylinder head assembly on TDV6 and TDV8 diesel engines. The bolt secures the cylinder head to the engine block, clamping...

EGR Gasket for the 2.7L TDV6 diesel engine (140kW). This gasket seals the Exhaust Gas Recirculation (EGR) system connections in the engine, preven...

Oil Separator Seal - sealing gasket for the oil separator in the crankcase ventilation system of the 2.7 and 3.0 litre V6 diesel engines. The oil ...

Thermostat Housing Gasket for the 2.7L TDV6 diesel engine. This gasket seals the thermostat housing (water outlet) to the engine, preventing coola...

Oil Pump Seal for the V6 diesel engine oil pump assembly, part of the engine lubrication circuit. It seals the oil pump interface to prevent oil l...

Glow Plug for the TDV6 2.7L and TDV8 3.6L diesel engines. Glow plugs are installed per cylinder in the cylinder head and heat the combustion chamb...

Fuel Return Tube for the 2.7L TDV6 diesel engine. This tube forms part of the fuel return circuit, routing excess fuel from the injectors or fuel ...

Fuel Return Tube for the 2.7L TDV6 diesel engine. This tube forms part of the fuel return circuit, routing excess fuel from the injectors or fuel ...

Oil Cooler Gasket for the oil cooler / oil filter housing assembly on the 2.7L TDV6 diesel engine. The gasket seals the joint between the oil cool...

Exhaust Manifold Stud for TDV6 2.7 and 3.0 and TDV8 3.6 diesel engines, used to fasten the exhaust manifold to the cylinder head. On 2.7 TDV6 engi...

Engine Oil Sump for the 2.7 TDV6 diesel engine. The sump forms the lower section of the crankcase and houses the oil reservoir from which the oil p...

Banjo Washer for the oil feed pipe banjo union at the turbocharger, used on TDV6 2.7L/3.0L and TDV8 3.6L/4.4L diesel engines. This sealing washer ...

Gasket - Oil Tube

Tube - Injection Pump Leak-Off

Bolt - Special is an M22 metric timing gear bolt used in the engine timing gear assembly. This special bolt secures components within the timing g...

EGR Inlet Hose for the 3.6L V8 32-valve diesel engine, part of the exhaust gas recirculation (EGR) system. It routes recirculated exhaust gas into...

Retainer - Valve Spring

Coolant Outlet Gasket for the engine cooling system, sealing the coolant outlet flange where it joins the engine on V8 applications. The gasket fo...

Timing Gear Bolt is the hex-head flanged bolt that retains the upper timing gear on the valve-timing drive. It secures the upper gear against the ...

Timing Chain Tensioner - Lower in the timing chain drive of the AJ-V8 petrol engine (4.4L and 4.2L supercharged). It maintains correct tension on ...

Coolant Temperature Sensor in the engine cooling circuit. This sensor monitors coolant temperature and transmits a signal to the engine management...

Crankshaft Oil Seal – Rear seals the rear of the crankshaft where it exits the cylinder block, retaining engine oil at the crankshaft-to-transmissi...

O-Ring A 53mm-diameter sealing O-ring for the thermostat housing in the engine cooling circuit. It seals the thermostat housing joint against cool...

Thermostat Housing Seal for the engine cooling system, sealing the thermostat housing joint. Fitted between the thermostat housing and its mating ...

Thermostat Housing Gasket in the engine cooling system. This 37 mm gasket seals the joint between the thermostat housing and the engine on AJ-V8 4...

Front Crankshaft Oil Seal for the AJV8 4.4L petrol engine, sealing the front of the crankshaft where it passes through the timing gear cover. It r...

Timing Cover Seal for the AJV8 petrol engine - a rubber seal fitted to the timing gear cover. It seals the timing gear cover against the cylinder ...