Products

Engine Mounting Support - front engine mounting support, part of the engine mounting assembly on the 5.0L V8 Petrol (AJ133). The support carries t...

Tow Hook Protective Cap is a cover for the towing eye aperture in the bumper. It closes off the tow hook mounting point when not in use, keeping o...

Lockable Retainer Handle for the detachable tow bar system. It secures and locks the removable tow bar neck into the receiver, and is supplied wit...

Lockable Tow Ball Handle Assembly for the detachable tow ball system. It locks the removable tow ball into the receiver to secure it against remov...

Differential Insulator - rubber mounting bush used in the differential mounting arrangement, on both the front axle case and the rear axle. It iso...

Front Differential Bush Mounting bush that locates and supports the front differential within the axle case. The bush isolates the differential fr...

Front Differential Bush Mounting bush that locates and supports the front differential within the axle case. The bush isolates the differential fr...

Rear Crossmember is the rearmost transverse member of the vehicle chassis, closing and tying together the two main longitudinal chassis rails at th...

Body Mount Bracket - chassis-frame bracket forming part of the body mounting arrangement between the body and the chassis frame. The bracket is fi...

Bolt - M10 x 25 mm, with washer. Underbody and chassis fixing used to secure engine splash shields, heat shields and underbody protection panels t...

O-Ring Seal for the cylinder head cover on the AJ-V8 4.4L petrol and 4.2L supercharged petrol engines. The seal locates in the groove of the cylin...

Timing Cover Gasket sealing the front timing cover to the cylinder block on the 4.4L AJ V8 petrol and 4.2L V8 supercharged engines. The gasket sea...

Lower Timing Cover Gasket - sealing gasket for the joint between the lower timing cover and the cylinder block on the AJ-series 4.4L V8 and 4.2L su...

Bolt

Air Conditioning O-Ring - a sealing ring for the air conditioning refrigerant circuit. It seals the joints between refrigerant lines and component...

Washer Bottle Filler Cap - the filler cap for the windscreen washer fluid reservoir. It closes the reservoir filler neck, sealing the washer fluid...

Oil Filter - element-type (cartridge) oil filter for the engine oil filter housing on the 3.6L TDV8 diesel (Lion) engine. The replaceable filter e...

Oil Cooler & Filter Gasket - sealing gasket for the engine oil cooler and filter assembly on the 3.6L TDV8 diesel (Lion) engine. It seals the ...

Oil Cooler Seal seals within the oil cooler and filter assembly. It forms the oil-tight joint at the oil separator on the 3.6L V8 diesel engine, p...

Hex Head Nut - M14 x 70mm. Crankshaft pulley fixing. It secures the crankshaft pulley and drive-belt assembly at the crankshaft nose, seating agai...

Nut for the diesel fuel injection pump and timing gear. Secures the drive gear to the high-pressure fuel injection pump on the 2.7L Lion V6 diesel...

Crankcase Ventilation Valve (PCV valve) for the crankcase emission control system. It regulates the flow of blow-by gases from the crankcase into ...

Turbocharger Gasket for the left-hand turbocharger on the 3.6L V8 diesel (Lion) engine. It seals the mounting joint between the turbocharger and i...

Turbocharger Gasket for the 3.6L V8 diesel (Lion) engine. It seals the mounting joint between the turbocharger and its mating flange, holding a ga...

Turbocharger Oil Return Tube Gasket for the 3.6L V8 turbo-diesel (TdV8) engine. It seals the joint at the turbocharger oil return (drain) tube, whe...

EGR Outlet Pipe Gasket for the 3.6L V8 diesel engine (TdV8), used in the exhaust gas recirculation (EGR) system. It seals the outlet pipe joint of...

Fuel Injection Pump Gasket for the 3.6L V8 diesel engine (TdV8), sealing the high-pressure fuel injection pump to its mounting on the engine. It f...

Sealing Ring for the Exhaust Gas Recirculation (EGR) system, measuring 31.03 x 3.5 mm. This O-ring seals a joint in the EGR circuit, containing re...

EGR Sealing Ring for the 3.6L V8 diesel engine (TdV8), used at a pipe joint in the exhaust gas recirculation (EGR) system. This O-ring, 31.03 x 3....

Cigar Lighter Base - the socket housing for the cigar lighter and 12V auxiliary power point. It mounts in the instrument panel or floor console and...

Thermostat Coolant Tube - a rigid coolant pipe serving the thermostat housing in the engine cooling circuit. It carries coolant between the thermos...

Inlet Manifold Air Duct - routes charge air into the inlet manifold as part of the engine air intake, carrying incoming air from the intake system ...

Gasket for the Exhaust Gas Recirculation (EGR) system, sealing the EGR cooler inlet pipe. It seals the joint where the inlet pipe meets the EGR co...

EGR Cooler Gasket for the exhaust gas recirculation (EGR) system on the 3.6L V8 diesel engine. It seals the joint between the EGR cooler and its i...

Water Outlet Connection for the 3.6L V8 TdV8 diesel engine cooling system, mounted at the thermostat housing. It carries engine coolant from the c...

EGR Valve Gasket for the 2.7L TDV6 diesel engine, sealing the inlet side of the exhaust gas recirculation (EGR) valve. Fitted at the EGR valve joi...

Fuel Injection Pump Bolt secures the high-pressure fuel injection pump to its mounting on the engine. It provides the clamping load that holds the...

Spark Plug for the 4.4L V8 and 4.2L supercharged V8 petrol engines. It ignites the air/fuel mixture in the combustion chamber. One spark plug is r...

Inlet Manifold for the right-hand cylinder bank of the 3.6L V8 TDV8 (Lion) diesel engine. Mounted to the cylinder head, the inlet manifold distrib...

Thermostat for the engine cooling circuit. Regulates coolant flow between the engine and radiator to bring the engine up to operating temperature ...

Inlet Manifold with integrated rocker (cam) cover for the left-hand cylinder bank. Serves the 3.6L TDV8 diesel engine, carrying intake air to the ...

Thermostat for the AJ-V8 petrol engine cooling circuit. The thermostat regulates coolant flow between the engine and radiator. It stays closed dur...

Intake Manifold Gasket - LH seals the intake (inlet) manifold to the cylinder head on the left-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel en...

Intake Manifold Gasket - RH seals the intake (inlet) manifold to the cylinder head on the right-hand bank of the 3.6L V8 TdV8 (Lion) turbo-diesel e...

Crankcase Breather Hose forms part of the crankcase emission control (ventilation) system on the 4.4L V8 AJ petrol engine. It carries crankcase bl...

Oil Sump Gasket seals the oil pan (sump) to the cylinder block on the V6 diesel engine. It maintains an oil-tight joint at the base of the engine,...