Products

Bolt - M8 x 75mm secures the lower timing gear on the V6 diesel engine. It is a fastener within the timing gear drive assembly. Thread size M8, le...

EGR Thermostat Assembly that regulates coolant flow through the exhaust gas recirculation (EGR) cooler on the 2.7-litre V6 and 3.6-litre V8 diesel ...

Heater Hose for the heater circuit of the 4.2L V8 supercharged petrol engine. This moulded hose carries engine coolant between the cooling system ...

Coolant Hose connecting the water outlet to the cylinder head within the engine cooling system. Part of the heater circuit, this hose routes coola...

Coolant Hose serving the throttle housing on the 4.4L V8 petrol (AJ V8 EFI) engine. This hose carries engine coolant to the throttle housing, prov...

Fuel Hose for the throttle housing on the 4.4L V8 petrol (AJ V8 EFI) engine. This moulded hose is routed at the throttle housing within the engine...

Oil Cooler and Filter Assembly for the engine lubrication and cooling circuit. The assembly combines the engine oil cooler with the oil filter hou...

Exhaust Clamp - 60mm exhaust joint clamp for the front section of the exhaust system, securing the downpipe to the centre silencer section. Clamps...

Transmission Oil Pan - fluid pan for the ZF 6HP26 / 6HP28 six-speed automatic transmission, forming the base of the transmission casing and holding...

Sensor

Coolant Hose - inlet tube connector hose in the engine cooling circuit of the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). It carries coolant between ...

Coolant Hose - water outlet hose running to the cylinder head, part of the engine cooling circuit on the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). ...

Heater Hose - coolant hose serving the cabin heating circuit on the 3.6L V8 32V DOHC EFi diesel (Lion TDV8). It forms part of the coolant path bet...

Throttle Seal for the intake throttle valve housing. It fits at the joint between the throttle body and the intake, maintaining an airtight connec...

D3S xenon headlamp bulb, supplied with its igniter, for headlamp units originally built as bi-xenon or adaptive xenon assemblies. D3S is a mercury...

Water pump for the cooling system of the 2.7L V6 turbo diesel. Circulates coolant through the cylinder block and heads, the radiator and the heate...

O-Ring, 11mm - a sealing ring used in the power steering hydraulic circuit, at the union joints of the pressure supply and return hoses. It seats ...

Housing Rear Axle Lion Diesel 2.7 V6

Thermostat for the engine cooling circuit of the 2.7 V6 Lion turbo diesel, supplied as the thermostat and water outlet connection assembly. The th...

Oil filter housing assembly for the 2.7 V6 turbo diesel, incorporating the engine oil cooler and the fuel cooler in a single casting. The housing ...

Fuel Filter within the diesel fuel supply assembly. This filter traps particulate contamination in the fuel supply circuit before fuel reaches the...

Fuel Filter Element for the 2.7L TDV6 diesel engine, fitted in the fuel supply circuit ahead of the high-pressure injection pump. The element remo...

Door Trim Name Plate - decorative name plate fitted to the visible face of the inner door trim panel. A cosmetic trim item only; it carries no str...

Ignition Coil for the 5.0L V8 petrol engine (AJ133), part of the ignition coil and spark plug assembly. This is a coil-on-plug unit: it mounts dir...

Timing Gear Bolt from the engine timing drive, securing the camshaft sprocket and variable camshaft timing adjuster to the camshaft. It provides t...

Crankshaft Sprocket Washer from the engine timing drive, fitted at the front of the crankshaft beneath the drive sprocket retaining bolt. It sprea...

Valve Spring Retainer from the cylinder head valve train, the top cap that closes off the valve spring. It sits on top of the valve spring and is ...

Crankshaft Front Oil Seal for the timing gear cover, sealing the crankshaft nose where it passes out through the front cover. It runs on the crank...

Idler Pulley for the primary accessory drive of the 5.0L V8 petrol engine (AJ133). It is a free-running, non-tensioning pulley that routes and sup...

Gasket - Oil Filter to Block seals the joint between the oil filter housing and the cylinder block, within the Oil Cooler and Filter assembly. It ...

Oil Cooler - the oil-to-coolant heat exchanger of the engine's Oil Cooler and Filter assembly. Engine coolant is passed through the cooler core to...

Breather Tube - crankcase ventilation tube within the engine's emission control system. It routes crankcase gases from the engine back into the in...

Gasket - Oil Cooler seals the engine oil cooler to its mounting face, within the Oil Cooler and Filter assembly. It maintains the integrity of the...

Camshaft Cover Gasket - LH seals the left-hand camshaft cover to the cylinder head on the AJ133 5.0L V8 petrol engine. It closes the joint around ...

Water Manifold Gasket for the engine cooling and heater circuit - it seals the water manifold tube where it leaves the cylinder block and feeds the...

O-Ring for the engine cooling system - it seals the water outlet tube at its connection to the cylinder block, alongside the thermostat housing. T...

Throttle Body and Motor - the electronic throttle assembly in the engine air intake system, mounted between the intake air ducting and the inlet ma...

Exhaust Manifold Gasket - right-hand side seals the exhaust manifold against the cylinder head face on the right-hand bank of the engine. It conta...

Exhaust Manifold Gasket - left-hand side seals the exhaust manifold against the cylinder head face on the left-hand bank of the engine. It contain...

Inlet Valve - cylinder head inlet (induction) valve for the 5.0L V8 AJ133 supercharged petrol engine. The inlet valve admits the intake charge int...

Crankcase Breather Tube - a hose in the crankcase emission control (crankcase ventilation) system on petrol engines. The tube routes blow-by gases...

Inlet Manifold Gasket - seals the inlet manifold to the cylinder head on the 5.0L V8 AJ133 naturally aspirated petrol engine. The gasket closes th...