Products

Auxiliary Battery - a sealed, non-spillable wet-cell battery that serves as the vehicle's secondary power source, separate from the main starter ba...

Cylinder Head Gasket for the 2.0L 16V TiVCT turbocharged petrol engine, sealing the joint between the cylinder head and the engine block. It conta...

Timing Chain Guide for the 2.0L 16-valve turbocharged petrol engine, fitted in the timing gear assembly at the front of the engine. The guide loca...

Oil Filter Adaptor Gasket for the 2.0L 16-valve turbocharged petrol engine, sealing the oil cooler and filter adaptor to the engine. The gasket fo...

Accessory Drive Pulley Bolt for the 2.0L 16-valve turbocharged petrol engine, used in the accessory drive belt system. The bolt secures the access...

Crankshaft Damper Washer for the 2.0L 16-valve turbocharged petrol engine, fitted in the crankshaft damper assembly at the front of the timing gear...

Valve Spring Retainer for the 2.0L 16-valve turbocharged petrol engine, fitted in the cylinder head valve train. The retainer caps the top of the ...

Timing Gear Bolt for the 2.0L 16V petrol engine. It secures a gear on the engine's timing drive.

Oil Drain Plug for the 2.0L 16V petrol engine. It seals the drain point in the oil pan (sump) and is removed to drain the engine oil at a service.

Exhaust Rubber Mount (insulator) that suspends the exhaust system from the underbody. The flexible rubber isolates exhaust vibration and noise from...

Air Intake Duct for the 2.0L Si4 turbocharged petrol engine. It channels intake air through the induction system on its way to the turbocharger and...

Idler Pulley for the front-end accessory drive of the 4.4L V8 diesel engine. The idler pulley provides a smooth rolling surface that routes and gu...

Catalyst Gasket for the exhaust system of the 2.0L 16V Ti-VCT four-cylinder petrol engine. This gasket seals the joint at the catalytic converter ...

Exhaust Pipe Gasket for the front exhaust section of the 2.0L turbocharged petrol engine. Seals the flanged front pipe to catalyst joint, providin...

Oil Pump Chain Tensioner for the 2.0L turbocharged direct-injection petrol engine. Maintains correct tension on the oil pump drive chain, taking u...

Timing Chain for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It forms part of the engine's timing drive, running between th...

Crankshaft Timing Gear for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It mounts on the nose of the crankshaft and drives t...

Camshaft Sprocket Washer for the 2.0L 16V TiVCT turbocharged petrol engine (Si4 240PS and Gen2). It fits at the camshaft sprocket within the timing...

Bonnet Gas Strut supports the bonnet in the raised position and dampens its opening and closing. Gas-pressurised lift strut mounted between the bo...

Parcel Shelf Strap Button is the pivot fixing that anchors the parcel shelf support strap in the load compartment. The support strap lifts the par...

Outside door release cable handle to latch RH/LH

Lower Rear Knuckle Bush locates the rear suspension knuckle to its lower suspension arm. Flexible mounting bush fitted at the lower link of the re...

Turbocharger Water Inlet Gasket seals the coolant inlet connection at the turbocharger. It fits between the coolant feed union and the turbocharger...

Oil Separator is the crankcase ventilation (PCV) oil separator for the 2.0L 16V turbocharged petrol engine. It sits in the crankcase breather circ...

Oil Pump Chain is the drive chain for the engine oil pump on the 2.0L 16V turbocharged petrol engine. It transmits drive from the crankshaft to th...

Valve Cover Gasket seals the joint between the camshaft cover and the cylinder head on the 2.0L 16V turbocharged petrol engine. It forms the oil-t...

Windscreen Washer Reservoir stores the washer fluid supply for the screen wash system and, on this variant, the headlamp power wash jets. This res...

Strap - Fuel Tank

Alternator Bracket mounts and locates the alternator on the engine, positioning it within the accessory drive belt run. Designed for the 4.4L DOHC...

Exhaust Manifold Gasket seals the joint between the turbocharger/exhaust manifold and the cylinder head, containing exhaust gas at the port face. ...

Exhaust Manifold Gasket seals the joint between the turbocharger and the exhaust manifold, containing exhaust gas at the flanged connection. Fitte...

Switch - Solenoid Control is a solenoid control switch located on the cylinder head of the 3.2L inline-six petrol engine. Two are fitted per engine.

Coolant Hose - Thermostat carries engine coolant to and from the thermostat housing within the cooling circuit. The moulded hose ties the thermost...

Cooling Fan and Motor Assembly is the engine cooling fan unit that draws air through the radiator to control coolant temperature. The assembly com...

Cylinder Head Bolt secures the cylinder head to the engine block on V6 and V8 petrol engines. Threaded M11 x 178 mm. Twenty bolts are required per...

Fuel Sender Cover for the fuel tank sender unit. It fits over the sender module aperture in the fuel tank, enclosing the fuel level sender assembly...

Power Steering Pressure Hose within the power steering hydraulic circuit. It carries pressurised fluid from the power steering pump to the steering...

Name Plate is a moulded plastic exterior badge fitted to the body panel.

Seal - Door Front and Rear

Plastic Rivet is a push-fit fastener that secures front engine-compartment insulation panels to the body. It locates into a pre-formed panel hole t...