Products

Water Outlet Connection in the engine cooling circuit, part of the thermostat and coolant outlet housing assembly. The connection routes coolant f...

Auxiliary Drive Belt for the front-end accessory drive, the multi-ribbed belt driven by the crankshaft pulley. The belt transmits drive from the c...

Rear Lamp - the combined stop and direction-indicator (flasher) lamp assembly for the right-hand side of the rear body. This is a complete tail la...

Idler Pulley - a drive belt idler in the front-end accessory drive (serpentine belt) system. The idler pulley routes and guides the multi-rib driv...

Heater

Oil Cooler - automatic transmission fluid cooler for the ZF 8HP gearbox. It sits in the transmission cooling circuit, taking hot ATF from the gear...

Kit - O

Heater Hose - a coolant hose within the heating and ventilation (HVAC) circuit. It carries engine coolant between the cooling system and the heate...

Crankshaft Seal and Retainer - the rear crankshaft oil seal complete with its retainer housing, sealing the rear of the crankshaft where it exits t...

Rear Brake Caliper - supplied less pads, for the rear axle braking circuit. The caliper houses the pistons that clamp the brake pads against the r...

Propeller Shaft - the rear propshaft that transmits drive from the transfer box output to the rear axle differential. It carries torque along the ...

Propeller Shaft

Fuel Injector Refit Kit - the seals and retainer required when removing and refitting a fuel injector on 3.0L V6 and 5.0L V8 supercharged petrol en...

Transmission Oil Cooler Pipe Assembly, part of the automatic transmission fluid cooling circuit. It routes transmission fluid between the ZF 6HP28...

Vent Hose for the engine cooling and cabin heating circuit. This hose routes coolant at the heater matrix outlet, carrying it back into the coolin...

Cross Member Insulator - a rubber isolating bush fitted between the rear suspension crossmember and the body structure. It cushions the crossmembe...

Fuel Injector Grommet - a sealing grommet that locates and retains a fuel injector where it passes through the cylinder head cover. It seals aroun...

Door Seal - the secondary weatherstrip seal for the front door, mounted on the body aperture. It forms a secondary sealing line around the front d...

Timing Gear Bolt - the upper fixing bolt for the timing gear drive on the 3.0L V6 diesel engine. It secures the upper timing gear within the engin...

Hex Head Bolt and Washer - a hexagon-head bolt supplied with a washer. A general-purpose fixing used at multiple mounting locations, including the...

Turbo Oil Feed Pipe delivers pressurised engine oil to the turbocharger, part of the turbocharger lubrication circuit. Fitted to the 2.2L 16V TDCi...

EGR Cooler Gasket seals the mounting joint between the EGR cooler and the exhaust gas recirculation circuit on the 2.2L Puma diesel engine. It mai...

Tailgate Cable Strap is the left-hand strap that supports the lower half of the split rear tailgate, limiting its downward travel and holding it le...

Air Deflector is the right-hand front deflector that channels incoming air into the cooling pack, sealing the gap alongside the radiator so airflow...

Radiator Hose - the top coolant hose in the engine cooling circuit. It carries heated coolant from the engine outlet to the top of the radiator, wh...

Radiator Hose for the engine cooling system - the top coolant hose. It carries coolant between the engine and the top of the radiator as part of th...

Absorber Shock - Discovery 4

Windscreen Wiper

Wiper Arm is the windscreen wiper arm that carries the wiper blade across the windscreen. It mounts to the wiper linkage spindle and transfers the...

Bonnet Release Cable transmits the pull from the interior release lever to the bonnet latch. Running from the cabin-mounted release handle to the ...

High Pressure Fuel Pump Tappet drives the engine-mounted high-pressure fuel pump from the camshaft. The tappet acts as the cam follower, riding on...

EGR Outlet Gasket seals the outlet joint of the exhaust gas recirculation circuit. Fitted at the EGR outlet flange, it seals the connection carryi...

Anti-Roll Bar Bush for the front conventional stabiliser bar. This rubber insulator clamps the front anti-roll bar to its chassis mounting bracket...

Fuel Pump and Sender Unit for the in-tank fuel delivery module. This assembly combines the electric fuel pump, which draws petrol from the tank an...

Nut - a fixing nut used at the turbocharger and exhaust manifold joint. It retains the turbocharger to the exhaust manifold, a high-temperature jo...

Radiator Grille - the front grille panel that fits in the front body aperture ahead of the radiator. It admits cooling airflow to the radiator whi...

Torque Converter Screw for the automatic transmission drive coupling. This fixing secures the torque converter to the drive plate, transmitting en...

Windscreen Wiper Arm for the front wiper assembly. This arm carries the wiper blade across the windscreen, driven from the wiper motor and linkage...

Battery Management System sensor for the negative battery terminal, forming part of the vehicle's battery monitoring and charge-control circuit. I...

Exhaust Crossover Pipe for the 3.0L V6 diesel, part of the front exhaust assembly. It carries exhaust gas from one cylinder bank across the engine ...