Products

Brake Disc for the rear axle, 317 mm diameter. Supplied singly.

Wire - Brake Pad Wear Warning

Turbocharger Gasket for the exhaust turbocharger joint, sealing the turbine outlet to the exhaust front pipe. The gasket maintains a gas-tight sea...

Turbocharger Gasket for the exhaust turbocharger joint, sealing the turbine outlet to the exhaust front pipe. The gasket maintains a gas-tight sea...

Diesel Exhaust Fluid (AdBlue) is a consumable fluid for the Selective Catalytic Reduction (SCR) exhaust aftertreatment system on diesel engines. I...

Brake Pad Set for the front axle, part of the front disc brake assembly. The pads are clamped by the front brake calipers against the brake discs ...

Front Brake Pad Set with ceramic friction material, for the front disc brake assembly. The set fits the front calipers and provides the friction s...

Headlamp Assembly - the complete front headlamp unit for the right-hand side of the vehicle, part of the exterior lighting system. This is an HID/...

Shock Absorber Boot for the suspension damper assembly. The boot sheaths the exposed damper piston rod, shielding it from grit, moisture and road ...

Drive Shaft Coupling for the rear driveshaft, connecting the driveshaft to the driveline flange. The flexible coupling transmits drive while dampi...

Cylinder Head Gasket for the 2.0L I4 diesel (AJ200) engine, sealing the cylinder head to the engine block. Supplied in thickness grade 1 (1.3 mm). ...

Cylinder Head Gasket for the 2.0L I4 diesel (AJ200) engine, sealing the cylinder head to the engine block. Supplied in thickness grade 2 (1.4 mm). ...

Cylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...

Cylinder Head Gasket seals the cylinder head to the engine block on the 2.0L Ingenium four-cylinder diesel engine (AJ200 series). It seals the com...

Cylinder Head Gasket for the 2.0L I4 diesel (AJ200) engine, sealing the cylinder head to the engine block. Supplied in thickness grade 4 (1.6 mm). ...

Cylinder Head Gasket for the 2.0L I4 (AJ200 / AJ20D4) diesel engine. It seals the joint between the cylinder head and the engine block, sealing com...

Cylinder Head Gasket for the 2.0L I4 (AJ200 / AJ20D4) diesel engine. It seals the joint between the cylinder head and the engine block, sealing com...

Cylinder Head Bolt for the 2.0L Ingenium diesel engine (AJ200 / AJ20D4), securing the cylinder head to the engine block. Supplied as a single bolt...

Cylinder Head Bolt Kit for the 2.0L Ingenium diesel engine (AJ200 / AJ20D4). Supplied as a set for renewing the cylinder head bolts when the cylin...

Exhaust Manifold Gasket that seals the joint between the cylinder head and the exhaust manifold. The gasket maintains a gas-tight seal at the mani...

Oil filter element for the engine lubrication system within the Oil Cooler and Filter assembly. This cartridge-type element removes particulate c...

Oil Drain Plug for the engine oil pan (sump). Threaded into the base of the oil pan, it seals the oil drain point and is removed to drain the engi...

Fuel Pressure Regulator fitted to the high-pressure diesel injection pump. The regulator controls the pressure of fuel delivered by the injection ...

Fuel Pressure Sensor mounted in the fuel supply manifold (common rail). The sensor measures the pressure of fuel in the rail and reports it to the...

Idler Pulley for the accessory drive belt system of the 2.0L I4 Ingenium (AJ200 / AJ20) petrol and diesel engine. The idler pulley guides the rout...

Camshaft Sprocket is a timing-drive gear in the valve train of the 2.0L Ingenium diesel engine (AJ200D). Mounted on the end of the camshaft, it is...

Fuel Pump Drive Sprocket is a timing-drive gear in the timing gear train of the 2.0L Ingenium diesel engine (AJ200D / AJ20D4). Driven by the timin...

Valve Rocker Arm for the cylinder head valvetrain. It transfers camshaft lift to the valve, actuating the valve as the camshaft rotates. Fitted to...

Valve Stem Seal seals the valve stem where it passes through the valve guide in the cylinder head of Ingenium diesel engines. Fitted over the top ...

Exhaust Valve is a poppet valve in the cylinder head of the 2.0L Ingenium diesel engine (AJ200D / AJ20D4 / AJ21D4). Seated in the exhaust port, it...

Inlet Valve is a poppet valve in the cylinder head of the 2.0L Ingenium diesel engine (AJ200D / AJ20D4 / AJ21D4). Seated in the intake port, it op...

Camshaft Cover Gasket sealing the camshaft cover to the cylinder head. It seals the joint between the camshaft (cylinder head) cover and the cylin...

Camshaft Cover Gasket sealing the camshaft cover to the cylinder head. It seals the joint between the camshaft (cylinder head) cover and the cylin...

Upper Timing Cover Gasket seals the upper timing chain cover to the cylinder head on the 2.0L Ingenium diesel engine (AJ200D / AJ20D4). It forms t...

Camshaft Position Sensor monitors camshaft rotation for the engine management system. Mounted in the cylinder head and camshaft cover, it signals ...

Temperature Sensor monitors engine coolant temperature from its mounting in the cylinder block, within the Cylinder Block and Plugs assembly. The ...

Intake Manifold Gasket seals the joint between the intake manifold and the cylinder head, within the air intake assembly. It maintains an airtight...

Exhaust Gas Temperature Sensor monitors exhaust gas temperature within the exhaust and emissions system. Mounted on the exhaust manifold or turboc...

Turbocharger Assembly for the 2.0L 16V TiVCT GTDI turbocharged petrol engine (240PS). The turbocharger forms part of the forced-induction system, r...

Rear Stop and Flasher Lamp, right-hand side, part of the rear lighting cluster. The unit combines the brake (stop) lamp and the rear direction ind...

Rear Stop and Flasher Lamp for the left-hand side of the rear lamp assembly. This lamp unit combines the brake (stop) light and the direction indi...

Hook Pin is a load space anchor pin fitted in the luggage compartment. It provides the mounting point onto which the load space retaining cord hoo...

Manifold Absolute Pressure (MAP) Sensor mounted on the inlet manifold, part of the engine management system on the 2.0L 16-valve turbocharged petro...

Condenser is the air conditioning condenser, mounted at the front of the vehicle ahead of the cooling pack. It dissipates heat from the refrigeran...

Radiator is the engine coolant radiator, mounted at the front of the vehicle within the cooling pack. It transfers heat from the circulating coola...

Cylinder Head Bolt clamps the cylinder head to the engine block, within the cylinder head assembly. It holds the head against the block and head g...