Products

Brake Caliper Carrier - Rear - the fixed bracket of the rear sliding-caliper brake assembly, dimensioned for the rear disc size used with the 18-in...

Brake Caliper Bracket - Rear - the fixed support bracket of the rear sliding-caliper brake assembly. The bracket bolts to the rear hub carrier and...

Bolt with an external Torx head, M12 x 35 mm. Used to secure rear brake components at the disc and calliper mountings, and rear suspension fixings...

Caliper Bolt for the front brake caliper assembly. This bolt secures the brake caliper to the hub carrier. It is a critical fastener in the front ...

Brake Disc Bolt - M10 x 20mm securing the brake disc to the hub flange. M10 x 20mm bolt with 1.5mm thread pitch. Multiple bolts are required per d...

Brake Caliper Screw for the front brake caliper and parking brake installation. Retains the caliper or its carrier to the mounting face on the hub...

Front Axle Case and Differential Assembly - the front differential supplied complete and built up in its axle case. The assembly houses the crownw...

CV-Joint GKN

CV Boot - Rear - Open Diff is the rubber protective boot for the outer constant velocity joint on the rear driveshaft, for vehicles with an open re...

CV Boot - Rear - Open Diff is the rubber protective boot for the outer constant velocity joint on the rear driveshaft, for vehicles with an open re...

Rear Axle Boot Kit

CV boot gaiter kit D3, D4, RRsp

Boot Kit - Front Drive Shaft and Hub

Stud

Terrafirma discrete winch mount Discovery 3

Lower Suspension Arm Bush Kit - a set of two polyurethane bushes for the lower suspension arms (wishbones) of the independent front and rear suspen...

Upper Suspension Arm Bush Kit - Front - a set of four polyurethane bushes covering both the front and rear mounting positions of the front upper su...

Lower Suspension Arm Bush Kit - Front - a set of two polyurethane bushes for the front lower suspension arms (wishbones) of the independent front s...

Lower Suspension Arm Bush Kit - Rear - a set of two polyurethane bushes for the rear mounting position of the rear lower suspension arms, within th...

Rear lower suspension arm bush - rear mounting position in the rear independent suspension arm assembly. The bush carries the rear eye of the lowe...

Rear upper suspension arm bush kit - rear mounting position in the rear independent suspension arm assembly. The upper arm governs how rear camber...

Rear lower suspension arm bush kit - front mounting position in the rear independent suspension arm assembly. This bush carries the forward eye of...

Rear upper suspension arm bush kit - front mounting position in the rear independent suspension arm assembly. The bush locates the forward eye of ...

Anti-Roll Bar Bush - polyurethane mounting bush for the front anti-roll (stabiliser) bar, within the front suspension anti-roll bar assembly. The ...

Anti-Roll Bar Bush - polyurethane mounting bush for the rear anti-roll (stabiliser) bar, within the rear suspension anti-roll bar assembly. The bu...

Anti-Roll Bar Bush - polyurethane mounting bush for the front anti-roll (stabiliser) bar, within the front suspension anti-roll bar assembly. The ...

Anti-Roll Bar Bush - polyurethane mounting bush for the rear anti-roll (stabiliser) bar, within the rear suspension anti-roll bar assembly. The bu...

Modular Steel Wheel is a heavy-duty 8-hole steel road wheel finished in satin black. Specification: 18 x 8 inch, ET45 offset, 5 x 120 PCD, rated t...

Steel Wheel - a 20x8 modular steel road wheel finished in satin black, supplied with matching wheel nuts. Rim specification: 20x8 in, ET45 offset,...

Wheel Nut finished in black, used to secure the Terrafirma TF152-series 18x8 modular steel road wheel to the hub. Supplied in a black finish to ma...

Winrace Alloy Wheel - 8x18 - Black - 18" aluminium alloy road wheel in a black finish. 8" rim width, ET42 offset, 5x120 PCD, 72.6 mm centre bore, r...

Wheel Centre Cap - Black - black centre cap for the Winrace alloy wheel, supplied individually. The cap closes the centre bore of the wheel, cover...

Winrace Alloy Wheel - 8x18 - Anthracite - 18" aluminium alloy road wheel in an anthracite finish. 8" rim width, ET42 offset, 5x120 PCD, 72.6 mm cen...

Transmission metal sump kit for the ZF 6HP26 six-speed automatic transmission within the Transmission External Components system group. The kit r...

Height Sensor Lift Rod Kit for air suspension systems on the Discovery 3, Discovery 4 and Range Rover Sport. The air suspension height sensors use...

Fitment All Models From (V)6A916890

Air to Coil Spring Conversion Kit - Discovery 3&4 From

Air to Coil Conversion Kit - plus 2" ride height. Replaces the electronic air suspension with coil springs and dampers at all four corners. The ki...

Wheel Spacer Set mounts between the wheel hub and the road wheel to increase track width, fitting over the hub and carrying a fresh set of studs fo...

Wheel Spacer Set mounts between the wheel hub and the road wheel to increase track width, fitting over the hub and carrying a fresh set of studs fo...

Hook & Loop Fastening Strap for securing and bundling loose items within the vehicle interior, cargo area, or workshop. The strap wraps around ...

Off Road Foam Air Filter-Discovery 3 - Discovery 4 RR RRS

Plus Foam Air Filter Eqv LR161843

Front big brake upgrade kit for the front braking circuit, taking front disc diameter to 360mm in place of the standard 320mm or 340mm discs. The ...