Products

Side Cover Gasket sealing the cylinder-block side cover (tappet inspection cover) to the block face on diesel engines. The side cover closes the p...

Front Cover Gasket sealing the timing cover to the front face of the cylinder block on the 300TDi 2.5L turbo diesel engine. It forms the oil-tight...

Oil Separator Drain Hose for the crankcase ventilation system on the 2.5L naturally aspirated diesel and 200TDi turbo diesel engines. It drains th...

Water Pump Inlet Gasket - seals the water pump inlet housing against the engine front cover within the coolant circuit. It forms the joint between...

Flywheel Dowel is a locating dowel that registers the flywheel to the crankshaft rear flange. Pressed into the crankshaft flange, it sets the angu...

Front Crankshaft Oil Seal seals the front of the crankshaft where it passes through the timing cover. It prevents oil loss at the crankshaft pulle...

Pulley

Oil Drain Pipe Gasket for the turbocharger oil return line on the 300TDi 2.5L turbo diesel engine. It seals the flanged joint where the external o...

Valve Stem Seal for the Rover V8 engine, part of the cylinder head valve train. The seal fits over the top of the valve stem where it passes throu...

Valve Stem Seal for the Rover V8 engine, part of the cylinder head valve train. The seal fits over the top of the valve stem where it passes throu...

Sensor oxygen FAE

Oil Level Indicator (Dipstick) Assembly for the Rover V8 petrol engine. The dipstick locates in the dipstick tube and allows the engine oil level ...

Cylinder Head Bolt for the 300TDi 2.5L turbo diesel engine, part of the cylinder head-to-block assembly. The bolt clamps the cylinder head onto th...

Washer – a flat washer used on the 2.5-litre 300TDi turbo diesel engine. The flat washer distributes the clamping load beneath a bolt or nut head.

Oil Pump Gasket for the Rover V8 petrol engine lubrication system. This gasket seals the oil pump to its mating face, maintaining oil pressure and...

Side Cover Gasket sealing the cylinder-block side cover (tappet inspection cover) to the block face, for petrol and diesel engines. The side cover...

Vacuum Pump Gasket for the 2.5L 300TDi diesel engine, sealing the vacuum pump mounting face to the cylinder block. The vacuum pump is driven from ...

Fuel Lift Pump Gasket seals the mechanical fuel lift pump to the engine on 2.5L diesel applications, including the 200TDi and 300TDi. Fitted betwe...

Drive Belt is the auxiliary drive belt for the 3.5L V8 petrol engine. Running from the crankshaft pulley, it drives the alternator and, where fitt...

Drive Belt is the auxiliary drive belt for the 3.5L V8 petrol engine. Running from the crankshaft pulley, it drives the alternator and, where fitt...

Coolant Temperature Sensor threads into the cylinder head and reports engine coolant temperature to the engine management system and the instrument...

Coolant Temperature Sensor threads into the cylinder head and reports engine coolant temperature to the engine management system and the instrument...

Coolant Temperature Sensor threads into the cylinder head and reports engine coolant temperature to the engine management system and the instrument...

Turbo Oil Drain Gasket seals the turbocharger oil return on the 2.5L 300TDi. Fitted at the joint between the turbocharger oil drain (return) pipe ...

Crankshaft Assembly for the 2.5L 300TDi turbo-diesel engine - the rotating shaft at the base of the cylinder block that converts the pistons' recip...

A/C Drive Belt drives the air-conditioning compressor on the 2.5L 300TDi diesel. Run from the crankshaft pulley, it transmits drive to the air-con...

Crankshaft Damper for the 300TDi 2.5L turbo diesel engine, mounted on the front nose of the crankshaft. This torsional vibration damper absorbs th...

Oil Cooler Thermostat Adaptor for the 2.5L 200 TDi and 300 TDi diesel engines, mounted on the oil filter housing within the oil cooler and filter a...

Viscous Coupling - the temperature-controlled fan drive that turns the engine cooling fan on the 2.5 litre 300 TDi diesel. The coupling sits betwe...

Adaptor Assembly Fi

Rubber Mounting A flexible rubber isolation mount used in the exhaust gas recirculation (EGR) system and air-cleaner assembly. It locates and supp...

Sealing Washer for the front (timing) cover of the 300TDi 2.5L turbo diesel engine. It provides a fluid-tight seal at the front cover, fitted unde...

Crankshaft Pulley for the 200TDi 2.5L turbo diesel engine, mounted at the front of the crankshaft. The pulley transmits crankshaft rotation to the...

Rocker Cover Gasket for the 2.5L 200TDi diesel engine, sealing the joint between the rocker cover and the cylinder head. Installed at the top of t...

Rocker Shaft Spring for the 2.5L 300TDi 4-cylinder turbo diesel engine. This spring locates and tensions the rocker shaft assembly within the cyli...

Rocker Cover Gasket for the 2.5L 300TDi diesel engine, sealing the interface between the rocker cover and the cylinder head. Installed at the top ...

Rocker Cover Gasket for the 2.5L 300TDi diesel engine, sealing the interface between the rocker cover and the cylinder head. Installed at the top ...

Rocker Cover Gasket for the 2.5L 300TDi diesel engine, sealing the interface between the rocker cover and the cylinder head. Installed at the top ...

Engine Piston for the 2.5L 300 TDi diesel engine, supplied in standard bore size. The piston runs in the cylinder bore and transfers combustion pr...

Engine Piston for the 2.5L 300 TDi diesel engine, supplied in standard bore size. The piston runs in the cylinder bore and transfers combustion pr...

Connecting Rod Assembly for the 300TDi 2.5L turbo diesel engine. The connecting rod links a piston to the crankshaft, transmitting the force of co...

Connecting Rod Bush is the small-end bearing bush pressed into the little-end of the connecting rod. It forms the bearing surface for the gudgeon ...

Water Pump Gasket seals the coolant pump to the engine front cover on the V8 petrol engine. It fits at the pump mounting face, sealing the coolant...