Products

Viscous Fan Coupling is the temperature-controlled drive unit between the water pump and the engine cooling fan. It mounts on the water pump shaft...

Breather cap for the rocker cover, part of the engine crankcase ventilation system. Fits the 2.25L four-cylinder petrol and diesel engines.

Zenith Carburettor for the 2.25L petrol engine, part of the fuel and induction system. It meters fuel into the incoming air stream to form the air/...

Weber Carburettor for the 2.25L petrol engine, part of the fuel and induction system. It meters fuel into the incoming air stream to form the air/f...

HT Ignition Lead Set for the 2.25L and 2.5L 4-cylinder petrol ignition system. This set of four high tension leads connects the distributor to eac...

HT Ignition Lead Set for the 2.25L and 2.5L 4-cylinder petrol ignition system. This set of four high tension leads connects the distributor to eac...

Coolant Hose for the V8 carburettor petrol engine cooling circuit. It carries engine coolant between components of the cooling system, moulded to s...

Exhaust Manifold Gasket for the 3.5L V8 petrol engine. This gasket seals the joint between the exhaust manifold and the cylinder head, preventing ...

Joint Washer sealing the carburettor to the inlet manifold on the Stage 1 V8. Forms the gasket joint between the carburettor base and the manifold...

Injector Leak-Off Pipe for the 2.25L and 2.5L naturally-aspirated diesel fuel injection circuit. This spill-return pipe connects the return unions ...

Electronic Ignition Kit for the Rover V8 petrol engine with a points-type distributor. The kit replaces the mechanical contact points and condenser...

Crankshaft Starting Dog for the 2.25L 4-cylinder petrol engine fitted to Series III and early Defender models with a 5-main-bearing crankshaft. Th...

Hydraulic Tappet fitted within the V8 petrol engine valve train, where it maintains zero valve clearance automatically. Engine oil pressure fills ...

Hydraulic Tappet fitted within the V8 petrol engine valve train, where it maintains zero valve clearance automatically. Engine oil pressure fills ...

Gasket

Core Plug (Cup Type) for sealing the core holes left in the engine block casting after the sand cores are removed during manufacture. The cup-shap...

Core Plug (Cup Type) for sealing the core holes left in the engine block casting after the sand cores are removed during manufacture. The cup-shap...

Crankshaft with Bearings for the 2.25L 4-cylinder petrol engine. The crankshaft converts the reciprocating motion of the pistons into rotational o...

Crankshaft Pulley for the 2.25L and 2.5L 4-cylinder petrol engine. It mounts on the nose of the crankshaft and drives the cooling fan, water pump a...

Coolant Bypass Hose for the 4-cylinder petrol and naturally-aspirated diesel engines (non-TDi). It forms the bypass path of the engine cooling cir...

Rocker Shaft - the hollow shaft that carries the rocker arms in the valvetrain, mounted across the cylinder head rocker pedestals. The rocker arms...

Cylinder Head Gasket for the 2.25L and 2.5L 4-cylinder petrol engine. This gasket is fitted between the cylinder head and the engine block, sealin...

Sealing O-Ring for the joint between the flywheel housing and the engine block on the 2.25L 5-bearing petrol and 2.5L naturally-aspirated diesel en...

Injection Pump for the 2.25L four-cylinder diesel fuel system. It meters pressurised fuel and delivers it to the injectors in firing sequence, gove...

Inlet Valve - the poppet valve that seals the inlet port in the cylinder head and opens on the induction stroke to admit the incoming air charge to...

Inlet Valve for the cylinder head of the 2.25L 4-cylinder petrol engine, with a 44.5mm head diameter. It seats in the inlet port of the combustion...

Exhaust Valve for the cylinder head of the 2.25L 4-cylinder petrol engine, with a 35mm head diameter and a single collet groove on the stem. It se...

Exhaust Manifold Locking Washer that secures the exhaust manifold fixings to the cylinder head. The tab washer fits under the manifold bolt or nut...

Exhaust Manifold Locking Washer that secures the exhaust manifold fixings to the cylinder head. The tab washer fits under the manifold bolt or nut...

Throttle Linkage for the 3.5L V8 fitted with twin Stromberg 175CD carburettors. This linkage connects the throttle pedal input to both Stromberg c...

Valve Stem Seal - the seal fitted over the valve stem in the cylinder head to control the oil that passes down the stem into the port. This is the...

Timing Chain for the Rover V8 petrol engine, part of the camshaft drive assembly located in the front timing cover. This single-row roller chain t...

Sealing ring

Oil Pump Gasket for the engine lubrication system, sealing the oil pump to its mounting face on the cylinder block. It maintains a leak-free joint...

Glow Plug for the diesel cold-start pre-heating system, threaded into the cylinder head to project into the combustion chamber (or pre-combustion c...

Glow Plug for the diesel cold-start pre-heating system, threaded into the cylinder head to project into the combustion chamber (or pre-combustion c...

Conrod Bolt for Land Rover petrol and diesel four-cylinder engines. This bolt secures the connecting rod cap to the connecting rod, clamping the b...

Dipstick Tube - the guide tube through which the engine oil level dipstick passes down into the sump. It locates in the cylinder block and directs...

Exhaust Rocker Valve for Land Rover diesel engines. This valve is located in the cylinder head and controls the exhaust port opening and closing c...

Cylinder Liner - the replaceable liner that forms the bore in which the piston and rings run within the cylinder block. It provides the hard weari...

Inspection Cover Gasket for the 2.5L diesel engine fitted to the Defender. This gasket seals the inspection cover on the engine block, preventing ...

Vacuum Advance Hose for the carburettor-fed 2.25L 4-cylinder petrol ignition system. This hose carries ported vacuum from the carburettor to the d...

Blanking Plug - Metric - Cylinder Head Rear seals the rear coolant gallery opening in the cylinder head on Land Rover 4-cylinder engines. The rear...

Breather Hose connecting the camshaft cover to the inlet manifold, part of the engine's crankcase ventilation system. It routes crankcase blow-by ...

Oil Pump Assembly for the engine lubrication system of the 4-cylinder non-TDi engine range. Driven from the engine, the pump draws oil from the su...

Exhaust Valve for the cylinder head valvetrain of the 2.25L and 2.5L naturally aspirated 4-cylinder diesel engines. The valve seals against its se...